HALCYON EX361 RGBW LED Spot Instruction Manual
- June 10, 2024
- HALCYON
Table of Contents
HALCYON EX361 RGBW LED Spot
OVERVIEW
① Front cover
② Tempered glass
③ Optical lens
④ Housing
⑤ Cable gland
⑥ Bracket
- Colour Temperature: 2700k + RGB
- Input Voltage: 24V DC Constant Voltage (wire in parallel)
- Ingress Protection Rating: IP65
- To prevent voltage drop over a circuit total luminaire wattage plus voltage drop over the length of a cable run and cable gauge must be taken into account.
- Always try to use a Constant Voltage Driver double the luminaire circuit wattage.
- Multistrand UV protected flex should be utilised for all exterior 24V DC CV circuits.
- All cable joints must be a resin or IP68 type – NOTE: standard crimps, terminal blocks and PVC tape are not suitable cable joining methods.
- Applicable environment temperature: -20°C …. +40°C
- All installation work must be carried out by a registered electrician.
WIRING DIAGRAM
24VDC RGBW fitting:
RGBW: circuit
SPECIFICATIONS
Material specifications:
Housing:| 12# Die- casting grey powder coated aluminum,
T=60- 80um.Adhesion of ISO class 1/ASTM class 4B
---|---
Bracket:| Powder coated aluminum
Glass:| Step tempered glost==4mm
Lens:| All- in- one optical lens,efficiency?85%
Gasket:| Tooling shaped seal
Cable gland:| IP68 PG-9 PVC
Power cable :| H05RN- F5 X 0. 5 mm2 L=2M
Electrical parameters:
Item No.| Light source| Lens| Degree(0)| Input voltage(V)| Typical operating
current(mA)| Typical Consumption(w)| Typical luminance(elm)| IK rate
---|---|---|---|---|---|---|---|---
EX361 labral| 6X4vV RGBW 4in 1| A23| 30| 24VDC| R=299 G=352 B=350 vV=349| 32|
1000| 09
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>