Shenzhen Huipow technology Co Ltd 2BAQA-HY03 Wireless Charger Instruction Manual
- June 10, 2024
- Shenzhen Huipow technology Co Ltd
Table of Contents
Shenzhen Huipow technology Co Ltd 2BAQA-HY03 Wireless Charger Instruction
Manual
Product introduction
Thank you for choosing to purchase this product! This product is a multi- functional wireless charging smart wireless charger with simple and generous design, which is suitable for mobile phones, headsets and other Qi wireless charging devices supporting wireless charging series. Please read the product manual carefully and keep it properly.
Product appearance
- Mobile phone/headset charging area
- Mobile phone bracket
- Equipment USB-C input interface
- Alarm 1/Alarm 2 status icon
- 12 hour/24 hour status icon
- Charge state icon
- Brand LOGO luminous area
- LED lighting area
- Product support
- Product air vent
- LED lighting switch key
- Upper setting key
- Lower setting key
- Set menu key
Instructions
- Use instructions Insert the Type-c data cable provided and turn on the power.
- Place the wireless charging device in the center of the charging area to start charging.
Charge state indicator
Multi function keys
List of accessories Multi functional wireless charger X1
lm Type-c charging cableX1
Instruction X1
Product parameters
- Product name: Wireless Charger
- Size: 139mm70mm13.5mm
- Input: 5V/3A 9V/2A
- Mobile output: 5W/7.5W/10W/15W(Max)
- headphone output: 3W(Max)
- LED lighting power: 1W (Max)
Matters needing attention
- Do not disassemble this product by yourself.
- Do not use this product in high temperature or humid environment, please keep away from fire and water.
- If the mobile phone has no built-in wireless reception function, please purchase a wireless charging receiver to cooperate with Use.
- If the mobile phone does not support the wireless fast charging function, it will automatically adjust to its own charging Electrical efficiency.
- The charging contact surface on the back of the charging equipment shall not contain metal substances, such as iron sheet, ring Metal protective shell, etc.
- It is recommended to use QC3.0 power adapter. It can make wireless charging more efficient Good effect.
- Only certified chargers supporting QC3.0 fast charging (5V3A, 9V/2A) are used Authorized chargers may cause damage, or wireless chargers may appear Fault.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body
Made In China