BigBattery com FEAGL-48015-G1 48V EAGLE Powerful Battery User Manual

BigBattery com FEAGL-48015-G1 48V EAGLE Powerful Battery

1. Introduction

Introducing BigBattery’s EAGLE! The 48V EAGLE is a small, yet remarkably powerful battery, with huge capacity for its size. Its sleek design is one indication of the care that is taken in the engineering and manufacturing of BigBat-tery batteries. Our design is intentional: to make a drop-in replacement of traditional lead-acid or lithium batteries a simple feat.
The EAGLE battery features the safest lithium battery chemistry currently available, LiFePO4 (lithium iron phos-phate), or LFP. By installing these batteries, you will reduce the overall weight of your vehicle, while adding a substantial amount of power. For example, just two (2) EAGLE units will increase power, and add range, while subtracting weight, when upgrading from a traditional 48V battery system (6 8-Volts, etc.). One (1) EAGLE unit can deliver 4,000 Watts of continuous power. It has 1.536 kWh of capacity, with a max discharge peak current of 180 Amps, for 6 seconds.
BigBattery’s EAGLE batteries are guaranteed to last you at least 3,700 cycles, and realistically up to 5,500 or more full charge and discharge cycles.
The EAGLE battery is an excellent solution for your golf cart needs. Our User Manual describes in detail the differ-ent viable installation methods, to get your golf cart outfitted right away with BigBattery state-of-the-art batteries. The mounting brackets provided give you several more options for mounting them in your battery bay. The brackets can add height, for example, to provide clearance over any dividers that may exist within your battery bay. Select from our EAGLE Kits (2-8 EAGLE units), to allow even more power, and more range, and a less overall amperage draw from your battery system, increasing its cycle life even more.
Please make special note of Section 7 towards the end of this Manual. You have the opportunity to share a tutorial of your BigBattery experience, which can help spread the word of our state-of-the-art batteries. Sharing your review may make you eligible for a special discount on future battery orders at BigBattery.com.
We hope you enjoy reading, and thank you for choosing BigBattery!

Features & Applications

Features

• Advanced BMS (Battery Management System)
• Drop-in replacement for GC2, GC8, or larger form factor batteries
• Safe Lithium-Ion LiFePO4/LFP Chemistry
• Multiple layers of battery protection and redundancy
•  External BMS Reset button
•  State of Charge (SoC) Meter with Extension Cable
•  High quality & durable steel construction
•  Utilizes standardized 175-amp connector for battery power source
•  LED Voltage Display
•  Unsurpassed 10-year Non-prorated Warranty

Applications

•  Golf Carts
•  Electric-Powered Vehicles
•  Electric Industrial Equipment
•  Remote Lighting Systems
•  Tiny House
•  Backup Power
•  Home
•  Cabin Off-Grid
•  Backup Power

The EAGLE is the ultimate 48V solution. It is the best solution for any upgrade from a 48V lead-acid system. The battery utilizes a standardized 175-amp connector, which safely and securely connects your battery units down the line. The battery comes equipped with an LED interface, which displays the battery’s current potential voltage. The battery State-of-Charge (SoC) meter, mounted on your dash, allows you to monitor your battery’s current energy level at any point. You can expect the EAGLE to last 3,700 – 5,500 full- charge/discharge cycles to 100% Depth-of-Discharge (DoD), from the battery’s rated capacity. BigBattery is so confident in the quality and performance of our products that we provide for you, a 10 year non-prorated warranty.
The choice is clear. To fulfill your power needs, the EAGLE or other select BigBattery batteries will be the best answer, whether it’s for your golf cart, battery powered equipment, small ESS, or a lithium-ion upgrade from any 48V application that was previously lead-acid. In choosing a battery solution from BigBattery, you have chosen a battery that provides the superior per-formance, reliability, and unparalleled value that our customers have come to expect. Equipped with the 48V EAGLE from BigBattery, you’ll stay powered and prepared!

3. Product Specifications

Choosing Your Kit

Min. No. of EAGLEs Needed for Your Motor/Controller

Minimum No. of Units| Motor/Controller Wattage| Motor/Controller Horsepower
---|---|---
2 EAGLEs| >8,000| 10
3 EAGLEs| >11,500| 15
4 EAGLEs| >15,000| 20
5+ EAGLEs| >18,500| 24

Typical Battery Run Time (each unit)

Battery Specs

System Configuration

| 2 EAGLE Kit| 16S (2P)| n/a
3 EAGLE Kit| 16S (3P)| n/a
4 EAGLE Kit| 16S (4P)| n/a
Nominal Voltage| 48| Volts (DC)

Capacity (Ah)

| 1 EAGLE| 30| Amp-hours
2 EAGLE Kit| 60| Amp-hours
3 EAGLE Kit| 90| Amp-hours
4 EAGLE Kit| 120| Amp-hours

Capacity (kWh)

| 1 EAGLE| 1.536| Kilowatt-hours
2 EAGLE Kit| 3.072| Kilowatt-hours
3 EAGLE Kit| 4.608| Kilowatt-hours
4 EAGLE Kit| 6.144| Kilowatt-hours
Operating Voltage Range| 43 – 58.8| Volts (DC)

Max Continuous Power

| 1 EAGLE| 4000| Watts
2 EAGLE Kit| 8000| Watts
3 EAGLE Kit| 11500| Watts
4 EAGLE Kit| 15000| Watts
Charging Voltage Range| 55.6 – 58.0| Volts (DC)
Parameter| Specification| Unit
---|---|---
Max Charging Voltage| 58.8| Volts (DC)
WARNING: Do NOT exceed max charging voltage.

Charging Current Limit (Continuous)

| 1 EAGLE| 30| Amps
2 EAGLE Kit| 60| Amps
3 EAGLE Kit| 90| Amps
4 EAGLE Kit| 120| Amps

Discharging Current Limit

(Continuous)

| 1 EAGLE| 80| Amps
2 EAGLE Kit| 160| Amps
3 EAGLE Kit| 240| Amps
4 EAGLE Kit| 320| Amps

Max Peak Discharge Current

(Over 6 seconds)

| 1 EAGLE| 180| Amps
2 EAGLE Kit| 360| Amps
3 EAGLE Kit| 540| Amps
4 EAGLE Kit| 720| Amps
Charge Temp Range| 0 – 55

(32 – 131)

| °C (°F)
Discharge Temp Range| -20 – 55

(-4 – 131)

| °C (°F)
Optimal Discharge Temp Range| 15 – 35

(59 – 95)

| °C (°F)
Storage Temp Range (Max 6 months)

(Humidity < 90%)

| -20 – 35

(-4 – 95)

| °C (°F)
Optimal Storage Temp Range| 15 – 35

(59 – 95)

| °C (°F)
Weight| 17.3

(38)

| kg (lb)
Length| 26.4

(10.4)

| cm (in)
Width| 18.3

(7.2)

| cm (in)
Height| 23.6

(9.3)

| cm (in)
Safety Features| BMS (Battery Management System), Over Voltage, Under Voltage, Over Current Protection, Thermal Management System, 250A Breaker
---|---
Max Battery Connections| Series: Not series capable Parallel: Max. 8 connections

BMS Specs

Charge Voltage Protection

| Maximum Charger Voltage (CC-CV)| 58.8| Volts (DC)
Overcharge Voltage Limit Cutoff Protection (each cell)| 3.8| Volts (DC)
Overcharge Voltage Limit Protection Delay Time| 2000| Milliseconds
Overcharge Protection Recovery Voltage| 3.45| Volts (DC)

Discharge Voltage Protection

| Low Voltage Protection Limit Range| 2.5 – 2.7| Volts (DC)
Low Voltage Protection Delay Time| 2000| Milliseconds
Low Voltage Protection Recovery| 3.0| Volts (DC)

Overcurrent Protection

| Charge Overcurrent Protection Value Range| 270 – 330| Amps
Charge Overcurrent Delay| 10| Seconds
Charge Overcurrent Release Recovery Condition| Reconnection delayed 120 seconds
Scenario 1: Discharge Overcurrent Protection| 300| Amps
Scenario 1: Discharge Overcurrent Protection Delay| 10| Seconds
Scenario 2 (Short Circuit): Discharge Overcurrent Protection Range| ****

800 – 1200

| ****

Amps

Scenario 2 (Short Circuit): Discharge Overcurrent Protection Delay Range|

600 – 1800

| ****

Milliseconds

Discharge Overcurrent Protection Recovery Condition| Reconnection delayed 120 seconds

Balance Function

| Minimum Cell Voltage to Activate Cell Balancing| 3.35| Volts (DC)
Voltage Difference to Activate Cell Balancing| 10| Millivolts (DC)
Balancing Mode| Balance when charging
Balancing Current Range| 100 – 260| Milliamps

Temperature Protection

| High Temperature Protection Value when Charging| 65

(149)

| °C (°F)
---|---|---|---
High Temperature Protection Release Value when Charging| 55

(131)

| °C (°F)
Low Temperature Protection Value when Charging| -2

(28.4)

| °C (°F)
Low Temperature Protection Release Value when Charging| 3

(37.4)

| °C (°F)
High Temperature Protection Value when Discharging| 75

(167)

| °C (°F)
High Temperature Protection Release Value when Discharging| 65

(149)

| °C (°F)
Low Temperature Protection Value when Discharging| -20

(-4)

| °C (°F)
Low Temperature Protection Release Value when Discharging| -10

(14)

| °C (°F)
Resistance| Resistance in the Discharge Circuit Range| 5 – 10| Milliohms

Self-Power Consumption

| Operating Mode Range (relay closed)| 35 – 50| Microamps
Sleep Mode| 0.5| Microamps
Sleep Conditions| No current, communication, or prolonged protection states
Time to Sleep Mode| 18 hours

Warnings & Precautions

Lithium Iron Phosphate (LiFePO4) is an inherently safe chemistry. However, safety measures should always be taken. Adhere to the instructions within this User Manual for safe handling and operation.
Warnings:

• Do not charge with a charge voltage above 58.8V.
• Do not charge nor discharge battery when ambient temperature is above 55 °C (131 °F).
• Do not install battery where it may contact conductive materials, water, seawater, strong oxidizers, or strong acids.
• Do not install battery in a location exposed to direct sun, hot surfaces, or hot locations. Do not install batteries in a tight clearance compartment as overheating may result.
• Keep any flammable/combustible material (e.g. paper, cloth, plastic, etc.) that may be ignited by heat, sparks, flames, or any other heat source at a minimum distance of two feet away from the batteries.
• Disconnect batteries immediately if, during operation or charging, they emit an unusual smell, develop heat, or behave abnormally.
• Have a Class ABC or Class BC fire extinguisher on the premises.

Precautions:

• Handle batteries and/or battery-powered devices cautiously so as to not damage the battery casing or connections.
• Do not charge battery if ambient temperature is below 0 °C (32 °F), nor discharge battery if ambient temperature is below -30 °C (-22 °F).
• Before storing battery for more than 6 months, charge battery to 53V or above.
• For long-term storage, disconnect batteries from your power system.
• Always wear protective gear when handling batteries.
• Do not place any objects on top of batteries.
• Make sure all cable connections are properly tightened.
• Install and remove batteries using the handles provided.

Parts & Installation

WARNING: Before installing, make sure to review all warnings and precautions in Section 4, as well as the installation safety guidelines in Section 5.1 below.

Installation Safety Guidelines

• Inspect batteries upon receipt for any signs of damage before use.
• Check to ensure that all cables are in good condition.
• Use a screwdriver with a rubber coated handle.
• When your battery has been charging and has come to maximum charge (up to 58.8V max.), your battery may experience a slight voltage drop either immediately or within an hour after unplugging. This is normal and should be no cause for concern.

Parts & Components 

Battery Installation

Step 1:
Remove old batteries from your battery tray.

• Set your parking brake, turn the ignition key to the OFF position, and remove the key.
• If your cart has a Run/Tow switch, switch it to the Tow position.
• Disconnect all cabling, watering systems, and accessories from your old batteries and remove them. ****

Step 2:
Decide how you’ll install your busbar and set your EAGLEs into your battery tray.

• Things to consider:
• Proper weight distribution
• Proximity to where you’ll be installing your busbar
• Ability to easily connect or disconnect cables (cart to busbar and busbar to batteries)

Step 3:
Install your busbar using the hardware provided.

Step 4:
Connect cables to your busbar.

•  Make sure you are always connecting your positive (+) ter-minals to the positive end of the busbar, and the negative (-) terminals to the negative end of the busbar.
• You should have one cable left over that is not plugged into an EAGLE unit. This will be for charging.

Step 5:
Set your EAGLEs in your battery tray and secure them with the mounting hardware provided.
Mounting brackets are height-adjustable and can be installed on any side of your EAGLEs so you can clear any dividers in your battery tray.

Step 6:
Plug in cables connected to your busbar to your EAGLE batteries.

Ensure cables have a secure connection by pushing them in all the way.

Step 7:
Connect Charge Display to your EAGLEs.

• Identify which EAGLE(s) has the Charge Display pigtail com-ing out of the back of the unit.
• Connect your Display extension cable to that EAGLE.
• Connect the Display extension cable to your Charge Display.

Charging & Troubleshooting 

Charging Option 1

• Connect the spare 175A connector in your battery tray to the 175A connector on your charger.
• Connect the AC plug on your charger to an outlet or other 110V power source and begin charging.

Charging Option 2

• Remove your spare 175A connector cable from your busbar.
• Connect your cart’s onboard charging terminals to your busbar.
• Connect the charging adapter for your cart to the 175A con-nector on your charger.
• Connect the AC plug on your charger to an outlet or other 110V power source and begin charging.

Troubleshooting
If the breaker trips or the battery turns off:

Unplug all EAGLEs

• If an EAGLE unit remains on after you have unplugged it, this means that the unit was properly synced and connected and no further action needs to be taken.
• If an EAGLE unit shuts off after unplugging, then you willhave to turn it back on by cycling the breaker or pressing the BMS Reset button found on the back of the unit.

 Recycling

Please dispose of LiFePO4 batteries at an authorized lithium recycling facility, or return to BigBattery. We can take care of recycling your batteries for you.

Warranty & Returns

In the unlikely event you are having an issue with one of our batteries, we have developed a straightforward warranty & return policy which includes the following:

• For all returns or warranty claims contact [email protected].
• 30-day money back guarantee. Returns of undamaged batteries unrelated to warranty claims may be issued full refunds less a 20% restocking fee.
•  We have a 10-year warranty on all new batteries. For more information, visit the Policies page at BigBattery.com.
•  We offer a 30-day warranty on all cells, accessories & complimentary products (power cables, wires, chargers, etc.).
•  Warranty only applies to original owner (non-transferable).
•  Warranties can be used for an exchange of a component only once per component.
•  Operating the battery outside of acceptable parameters, according to our listed battery specs will void your warranty.
•  Example: Using an incorrect charger may exceed max. charging voltage specifications.
•  WARNING: Make sure to use the appropriate charger for your battery.
•  Customer pays return shipping on returns or warrantied component inspections initiated after the first 30 days of ownership. Please note some battery returns may require special documentation and packaging, and these instances will encounter extra fees. This is to correctly comply with lithium battery shipping regulations.
•  If you have a quality issue with a product, please contact our support team to help properly diagnose the prob-lem. If the product you receive does not meet our rigorous quality standards, then we will issue you a replace-ment component or fix the original at no additional cost. Replacement batteries or components will only be sent after we have received your returned battery or component and finished an inspection to determine the cause of any problems. BigBattery is not responsible for return shipping.
•  DIY modifications or damage due to gross negligence or abuse are not covered by the warranty.

For all returns, please mail your package in a traceable method to the address below. Include a note with your name, your order number and describing your situation and/or request.
BigBattery Inc.
Technical Support Team
[email protected]
818-280-3091, ext. 1005
9667 Owensmouth Ave., Suite 105
Chatsworth, California 91311

Need Further Assistance?
Email us @ [email protected] (OR) Call us @ # 818-280-3091.

References

• Lithium Battery Packs | BigBattery | Your Source for Power
• YouTube

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>