Lenco LFM-110BK Dual Matrix Party Light and Fog Machine User Manual
- June 10, 2024
- Lenco
Table of Contents
Model: LFM-110BK
User manual-Dual matrix party light and fog machine
Version : 1.0
CAUTION:
Usage of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2″) free space around the whole device.
-
Install in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.
-
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
-
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol based Liquids. To remove severe stains, you may use a damp cloth with dilute detergent.
-
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
This product is intended for non professional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
If the product is delivered with power cable or AC power adaptor:.
• If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
• Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
• Unplug this device during lightning storms or when unused for a long period.
• The socket outlet must be installed near the equipment and must be easily accessible.
• Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
• Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
• Devices with class 2 construction do not require a earthed connection.
• Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
• Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock. -
If the product contains or is delivered with a remote control containing coin/cell batteries: Warning:
• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
• [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. -
Caution about the use of Batteries:
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas..
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal. -
Never look directly into the light source. Danger of damage to the eyes or even blindness in extreme circumstances!
-
If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
• [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. -
Caution about the use of Batteries:
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.
PANEL
- Fog liquid tank with screw-cap
- Indicator light: Red LED : light & fog; Green LED: light
- Light/Light & Fog button
- Sound pickup
- POWER Switch: ON or OFF
- AC INPUT: AC 230V~50/60Hz. (If the fuse is blown you can exchange it with A new FUSE type T6.3A 250V 5x20mm)
- Mounting Bracket
- Dual Light
- Fog nozzle
REMOTE CONTROL
- AUTO: The Animations follow the music beat Automatically
- SPEED 1: The Animations speed level 1
- LOVE: Select Animation “LOVE”
- MANUAL: Press and hold to spray fog, release to stop the fog output
- 5S: Sprays fog for 5 seconds
- 15S: Sprays fog for 15 seconds
- 20S: Sprays fog for 20 seconds
- 10S: Sprays fog for 10 seconds
- COUNT DOWN: Start COUNT DOWN
- REP: Press select repeat animation, “A L”, means repeat all, “S I” means repeat one, “R A” means randomly.
- SPEED 3: The Animations speed level 3
- SPEED 2: The Animations speed level 2
- Light ON/OFF
Replace new remote, in the first time have to match the code.
(1) Long press the Light ON/OFF button 3seconds, start to match the code.
(2) The lights show “OK”, means matching success.
(3) Then can use the new remote normally.
OPERATING
INSTALLATION
Unpack and carefully check that there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the device against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively.
The device should be located on a secure, solid surface such as the floor. The machine can operate in any orientation from 45 degrees upwards to 45 degrees downwards. Take precautions to avoid Liquid spills if the machine is oriented at an angle.
Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
2. Precautions/ safety warnings
– The LFM-110 was developed for private use only, disco party etc.
– The LFM-110 is only approved for a mains connection up to 230 VAC 50/60 Hz
– Regular breaks during operation will increase the lifetime of the LFM-110.
– Take care that no cables are lying around. You would endanger your own
safety and also the safety of a third party.
– Keep the LFM-110 dry and keep it away from water or high humidity. It could
reduce the isolation of the device and cause short circuit and/or electric
shocks.
– When using the LFM-110 fog machine you have to ensure that there is still a
good visibility of at least 10m.
– Don’t operate the device during thunderstorms. Surge voltages can damage the
device. Unplug the LFM-110 from the power supply during thunderstorms.
– Keep Surrounding objects at a safe distance of >1m
– Keep the device away from children and never operate it unattended.
– Never aim the nozzle directly on people; the ejected fog is very hot!
– Never use flammable substances, oil, gas, perfumes, etc. in your fog fluid.
– Never aim the nozzle on open fire or flammable objects.
– Make sure to fill the LFM-110 with fog fluid in time. If the machine is
operated without fluid it can cause damage to the pump or the heating block.
– When removing the Fog fluid, first unplug the device from the power supply.
– Never drink the fog fluid. If this does happen, please contact a doctor. If
the fluid came in contact with the eyes, immediately rinse with a lot of
water.
Fog Operating
Filling the unit
NOTICE
Possible damages caused by unsuitable fog liquid. We advise to use Lenco FOG
liquid FML-100 or similar.
Warning: don’t use Oil based Haze fluids. These will damage the LFM-110
First, make sure the unit is disconnected from the mains
Open the screw-cap of the liquid tank and fill in the fog Liquid. Make sure
that no fog Liquid is spilled or gets into the device. The easiest way is
using a funnel. The tank capacity is 1.0 litre. Make sure the little filter of
the tank hose is immersed into the smoke fluid. Firmly screw the cap back onto
the tank
NOTICE! The tank hose opening in the cap is NOT fluid tight. When transporting the LFM110 firstly remove the unused smoke fluid to prevent smoke fluid coming out and damaging the LFM-110
Turning on the unit
NOTICE! Fire hazard
Do not operate the LFM -110BK unattended.
Connect the device to the mains and switch the device to “Light &FOG” with the
Power switch. Allow the unit heat up 5 - 6 minutes
As soon as the required operating temperature is reached, the green LED on the
wired control will light up, meaning the device is operational.
Operating:
When operating the fog machine, always ensures that there is sufficient fog
liquid in the liquid tank to avoid no-load running.
Operation with an empty liquid tank can lead to overheating and permanent
damage of the pump
WARNING: When the fog machine is in use don’t touch the top of the
casing and the Fog nozzle on the front since they will get hot. Never aim
the fog nozzle directly on people within a range of 50cm when in use. The
ejected fog is very hot!
Turning the unit off
Allow the LFM-110BK to keep unused for several minutes before switching the
Power Switch to OFF. Turning off the power switch during fog production can
cause damage to the heat exchanger.
Allow the LFM-110BK to cool completely before packing/storing.
The nozzle of the LFM-110BK may remain hot for up to 10 minutes after power is shut off.
Switch the device “OFF” with the Power switch. Disconnect the device from the mains. Transport the device only when it is completely cooled down.
To avoid leaking fog Liquid during transport, you should transport the device only with empty liquid tank.
WARNING
If the machine will be unused for an extended period of time, follow the
Storage and Shipment instructions listed under Maintenance to prepare the
machine for long term storage.
Remote Control
Press the 5S button to spray fog for 5 seconds Press the 10S button to spray fog for 10 seconds Press the 15S button to spray fog for 15 seconds Press the 20S button to spray fog for 20 seconds Press and hold the MANUAL button to spray fog, release the button to stop the fog output.
Maintenance
Do not allow the fog machine to become clogged. After every 40 hours of
continuous operation, clean the machine with clean water at intervals to
prevent the machine from being blocked. If it is blocked, it can be cleaned
with white vinegar. It is also recommended to use white vinegar for three or
two months.
The recommended cleaning procedure is as follows.
- Unplug the product from power.
- Remove all fog Liquid from the machine.
- Add some cleaning solution (white vinegar) to the tank until the fluid reaches the first \ vertical marking indicator on the back
- Connect the product to power and allow it to warm up.
- Run the unit in a well ventilated area until the tank is almost empty. Do not allow the pump to run dry.
- Refill with fog Liquid to continue using the fog. Run the machine briefly to clear any remaining cleaning solution from the pump and heater.
Operating the Animation lights
Notice!
Never look directly into the light source.
Danger of damaging the eyes or even blindness in extreme circumstances!
OPERATING Turning the unit on
Connect the device to the mains.
Set the main switch of the LFM-110BK to “Light” on with the Power switch, to
operate the animation lights only.
Set the main switch of the LFM-110BK to “Light & FOG” on to operate the
animation lights together with the fog machine.
Light on/off
Press the Remote control button Light on/off to turn on/off the animation
lights.
Show various animations
-LOVE
Press the “LOVE” button on the remote control, to show “Love”
-COUNT DOWN
Press the “COUNT DOWN” button on the remote control to show
“9””8″”7″”6″”5″”4″”3″”2″”1″. Before showing the “1”, Press 5S/10S/15S/20S
button to spray the fog 5/10/15/20 seconds.
NOTE: Ensure the Power Switch is set to “LIGHT&FOG” to use the countdown with fog.
-REP
Press the REP button on the remote control to select play animation. “AL”
means repeat all. “SI” means, repeat the animation which is showing “RA”
means, play the animations randomly.
Selecting the speed
-AUTO
Press the “AUTO” button for the Animations reacting to the music automatically
-SPEED 1
Press the SPEED 1 button, the Animations move at level 1
-SPEED 2
Press the SPEED 2 button, the Animations move at level 2
-SPEED 3
Press the SPEED 3 button, the Animations move at level 3
Accessories-included
Remote control Power cable User manual
Features and specifications
Physical
Length ……………………………….. 263mm
Width ………………………………… 264mm
Height ……………………………….. 175mm
Dry weight …………………………. 2.65kg
Performance
Operating time …………………………… continuous
Fog heater warm up time ……………. approx.6 min
Fog full charge use time …………….. 50-60min
Fog heating Power …………………….. 500 Watt
RF remote control
Battery ……………………………………….. CR-2025
Control Frequency ……………………… 433 Mhz
Liquid system
Capacity of liquid tank …………….. 1.0 Litre
Compatibility …………………………… Water based Glycol/Glycerol fog fluid like Lenco
FML-100
Light system
Light source ………………………………. Dual 7×7 Matrix RGBW party LED lights
Animations move speed ……………. AUTO/Speed 1/Speed 2/Speed 3
Play & Repeat ……………………………. AL/R1/RA
COUNT DOWN ………………………. 9 8 7 6 5 4 3 2 1
Thermal
Ambient temperature …………………. 0°C to 35°C
Electrical
AC230 V±10%, 50/60 Hz
1. Guarantee
Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.
2. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements may be obtained from the description made in this manual.
3. Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).
4. CE Marking
Hereby, Commaxx B.V. Wiebachstraat 37,6466 NG Kerkrade,The Netherlands
declares that this product is in compliance with the essential EU directive
requirements.
The declaration of conformity may be consulted via
[email protected]
5. Service
For more information and helpdesk support, please visit
www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands.