DYNALINK A 3245 HDMI Extender With USB KVM Instruction Manual
- June 10, 2024
- DynaLink
Table of Contents
DYNALINK A 3245 HDMI Extender With USB KVM
HDMI Extender With USB KVM
Product Information
The A 3245 HDMI Extender With USB KVM is a high-performance product that can extend HDMI HD signals up to 230ft / 70m via a single CAT6/6a cable. It enables zero-delay, uncompressed long-distance transmission between the transmitter and receiver. The video resolution is up to 4K2K@60Hz, and it supports KVM signal pass-through, allowing remote control of the source device at the display device. It also supports EDID copy pass-through function between source and display devices and POC function.
- HDMI2.0b and HDCP 2.2 compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz RGB/YCbCr 4:4:4
- The transmission distance can be extended up to 230ft / 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Audio formats: LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+)
- Support 3.5mm analog audio de-embedding, audio is output through the L/R OUT port of the receiver
- EDID copy pass-through function between the source device and display device
- Support bi-directional POC (Power over Cable) function
- With USB KVM pass-through function, USB1.1 compliant, support remote control by a keyboard and mouse
- Compact design for easy and flexible installation
Product Usage Instructions
- Before you start using the A 3245 HDMI Extender With USB KVM, read the manual carefully and keep it for future reference.
- Make sure that your equipment is surge protected to prevent damage from electrical spikes, surges, and lightning strikes.
- Connect the HDMI source device to the HDMI IN port of the transmitter using an HDMI cable.
- Connect the HDMI display device to the HDMI OUT port of the transmitter using an HDMI cable.
- Connect the single Cat6/6a cable between the transmitter and receiver.
- Connect your keyboard and mouse to the USB ports on the transmitter and receiver.
- Connect the power adapter to the transmitter and receiver.
- Turn on your equipment in the following order: HDMI source device, transmitter, receiver, and HDMI display device.
- If you want to use audio, connect the 3.5mm analog audio cable to the transmitter and receiver.
- You can control your source device remotely using your keyboard and mouse connected to the USB ports on the transmitter and receiver.
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
This 18Gbps HDMI Extender can extend HDMI HD signal to a distance up to 230ft
/ 70m via a single CAT6/6a cable, which can achieve zero-delay, uncompressed
long-distance transmission between the transmitter and receiver. Video
resolution is up to 4K2K@60Hz. The Extender supports KVM signal pass-through,
which can remote control source device at display device. It supports EDID
copy pass-through function between the source device and display device. It
supports POC function.
This Extender can be widely used in multi-media conference halls, TV teaching
and large-screen displays.
Features
- HDMI2.0b and HDCP 2.2 compliant
- Support 18Gbps video bandwidth
- Support video resolution up to 4K2K@60Hz RGB/YCBCR 4:4:4
- The transmission distance can be extended up to 230ft / 70m via a single CAT6/6a cable
- Support HDR, HDR10, HDR10+, Dolby Vision, HLG
- Audio formats: LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+)
- Support 3.5mm analog audio de-embedding, audio is output through the L/R OUT port of the receiver
- EDID copy pass-through function between the source device and display device
- Support bi-directional POC (Power over Cable) function
- With USB KVM pass-through function, USB1.1 compliant, support remote-control by keyboard and mouse
- Compact design for easy and flexible installation
Package Contents
- 1 × 18Gbps HDMI Extender (Transmitter)
- 1 × 18Gbps HDMI Extender (Receiver)
- 1 × USB-A to USB-B Cable (1.5 meters)
- 4 × Mounting Ears
- 8 × Machine Screws (KM3*4)
- 1 × 12V/1A Locking Power Adapter
- 1 × User Manual
Specifications
Technical|
---|---
HDMI Compliance| HDMI 2.0b
HDCP Compliance| HDCP 2.2
Video Bandwidth| 18Gbps
Video Resolution| Up to 4K2K@60Hz RGB/YCBCR 4:4:4
Transmission Distance| 4K2K@60Hz 4:4:4–70m, 1080P–70m (CAT6 cable)
Color Space| RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12bit
HDR| HDR, HDR10, HDR10+, Dolby Vision, HLG
Audio Formats| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby
Digital Plus(DD+)
Connection
Transmitter
| Input: 1 × HDMI IN [TypeA, 19-pin female] Output: 1 × HDMI OUT [TypeA, 19-pin female]
1 × CAT OUT [RJ45]
Control: 1 × SERVICE [Micro-USB jack] 1 × USB port [Type-B jack]
Receiver
| Input: 1 × CAT IN [RJ45]
Output: 1 × HDMI OUT [TypeA, 19-pin female] 1 × L/R OUT [3.5mm Stereo Mini- jack]
Control: 1 × SERVICE [Micro-USB jack] 2 × USB port [Type-A jack]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter / Receiver: 90mm (W)×68mm (D)×22mm (H)
Weight| Transmitter: 170g, Receiver: 169g
Power Supply| DC 12V/1A;
Support bi-directional POC function
Power Consumption| 4.2 W (max)
Operating Temperature| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | SERVICE | Firmware update port. |
| 2 | HDMI OUT | HDMI signal loop output port. Connect to HDMI display devices |
with HDMI cable.
3| HDMI IN| HDMI signal input port. Connect to HDMI source device with HDMI
cable.
4| CAT OUT| RJ45 connector for connecting the CAT IN port of the Receiver with
CAT6/6a cable.
5
| Data Signal Indicator (Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
6
| Link Signal Indicator (Green)| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection status.
▪ Dark: Transmitter and Receiver are not connected.
7| PC| Connect to PC. The computer can be accessed and controlled remotely
through the USB port of the receiver (KVM function).
8| DC 12V| DC 12V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter or Receiver is connected to 12V/1A power supply, the other doesn’t need power supply.
9| EDID DIP
switch
| Use the DIP switch to set EDID. (Switching to the upper end indicates 1; switching to the lower end indicates 0.)
11 – EDID information is copied from the display at the RX. 10 – EDID is preset to 4K@60Hz 2.0CH
01 – EDID is preset to 1080p 2.0CH
00 – EDID information is copied from the HDMI OUT at the TX.
Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | SERVICE | Firmware update port. |
| 2 | HDMI OUT | HDMI signal output port. Connect to HDMI display devices with |
HDMI cable.
3| L/R OUT| Analog audio output port, used for audio de-embedding output.
4| CAT IN| RJ45 connector for connecting the CAT OUT port of the Transmitter
with CAT6/6a cable.
5
| Data Signal Indicator (Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
6
| Link Signal Indicator (Green)| ▪ Illuminating: Transmitter and Receiver are in good connection status.
▪ Flashing: Transmitter and Receiver are in poor connection status.
▪ Dark: Transmitter and Receiver are not connected.
7| Keyboard port| Connect to the keyboard.
8| Mouse port| Connect to the mouse.
9
| ****
DC 12V
| DC 12V/1A power input port.
Note that the extender supports POC function, it means that either Transmitter or Receiver is connected to 12V/1A power supply, the other doesn’t need power supply.
Application Example
Transmitter
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>