DYNALINK H 8126B 42-84 Inch Cantilever Flat Screen Wall Bracket Installation Guide
- June 9, 2024
- DynaLink
Table of Contents
DYNALINK H 8126B 42-84 Inch Cantilever Flat Screen Wall Bracket
Item No.: H 8126B
Tools required
Assembly Instruction
Keep the gear up when mounting the product to the wall.
-
Press the brackets after you put them on the wall plate, then they would be locked with wall plate.
-
Pull down two strings together to unlock the brackets from the wall plate, then you can take brackets down.
CAUTION
This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children.
- Make Sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, please contact a professional installer for assistance.
- The wall or mounting surface must be capable of supporting the combined weight of the mount and the display, otherwise the structure must be reinforced.
- Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death.
- please check joint parts every two months, making sure the screws are loosened or not.
This product was designed to be installed on wood stud walls and solid concrete walls. Before installing, make sure the wall will support the combined load of the equipment and hardware. Never exceed the maximum load capacity 60 KG, or else it may result in product failure or personal injury.
Note: this product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Dynalink Distributors warrants this product for one year from date of purchase
from Dynalink or its resellers to the consumer. If this item is part of an
installation or another product, please contact the installer or supplier for
your warranty.
During the warranty period, we undertake to repair or replace your product at
no charge if found to be defective due to a manufacturing fault. The warranty
excludes damage by misuse or incorrect installation (i.e. failure to install
and operate device according to specifications in the supplied instruction
manual), neglect, shipping accident, or no fault found, nor by use in a way or
manner not intended by the supplier.
For repair or service please contact your PLACE OF PURCHASE.
It is at Dynalink discretion as to whether the goods will be repaired or
replaced (whilst under warranty); and as to whether identical goods will be
used to replace the item due to changes of models / products.
Note: Under no circumstances should you attempt to repair the device
yourself or via a non-authorized Dynalink service center, as this will
invalidate the warranty!
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to
be of acceptable quality and the failure does not amount to a major failure.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>