Lenco PDR-065 Easy DAB+ FM Radio with Battery Charging Station User Manual
- June 10, 2024
- Lenco
Table of Contents
Model: PDR-065
User Manual EASY DAB+/FM radio with battery charging station
CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
PRECAUTIONS BEFORE USE
KEEP THESE INSTRUCTIONS IN MIND:
-
Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
-
Install in accordance with the supplied user manual.
-
Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heatgenerating products or naked flame. The device can only be used in
moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C. -
Avoid using the device near strong magnetic fields.
-
Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.
-
Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts.
For the same reason, do not spill water or liquid on the product. -
Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
-
The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
-
Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.
-
Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
-
This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
-
Keep away from animals. Some animals enjoy biting on power cords.
-
To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
To remove severe stains, you may use a damp cloth with dilute detergent. -
The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
-
Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
-
If the unit has USB playback function, the USB memory stick should be plugged into the unit directly.
Don’t use an USB extension cable because it can cause interference resulting in failing of data. -
The rating label has been marked on the bottom or back panel of the device.
-
This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
-
This product is intended for non professional use only and not for commercial or industrial use.
-
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
-
Never remove the casing of this device.
-
Never place this device on other electrical equipment.
-
Do not allow children access to plastic bags.
-
Only use attachments/accessories specified by the manufacturer.
-
Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.
-
If the product is delivered with power cable or AC power adaptor:
• If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
• Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
• Unplug this device during lightning storms or when unused for a long period.
• The socket outlet must be installed near the equipment and must be easily accessible.
• Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
• Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
• Devices with class 2 construction do not require an earthed connection.
• Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord.
This can cause a short circuit.
• Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock. -
If the product contains or is delivered with a remote control containing coin/cell batteries:
Warning:
• “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
• [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
• Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. -
Caution about the use of Batteries:
• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• Attention should be drawn to the environmental aspects of battery disposal.
NSTALLATION
- Unpack all parts and remove protective material.
- Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
Accessories
- Remote Control
- Power Adapter
- User manual
LOCATION OF CONTROL
- Remote / Mobile Holder
- Menu / Snooze button
- On/Off button
- Tune + / – button
- Volume knob
- Scan button
- Mode button
- Enter button
- Info button
- Remote control sensor
- LCD display| 12) Preset station nr. 1 button
- Preset station nr. 2 button
- Preset station nr. 3 button
- Preset station nr. 4 button
- Speaker
- FM antenna
- Type C socket
- 3.5mm headphone jack
- Line out socket
- Easy-Normal mode switch
- DC jack of the charger docking station
- AC/DC adaptor
- DC plug
---|---
Caution: Use of controls or procedures other than those specified herein
may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified
service personnel.
Important: Since the sensitive circuitry may cause interference to a
radio tuner nearby, switch this unit off while operating other radio devices.
Due to the complexity of the MCU control, please un-plug the main power supply
of the unit if the unit stops during operation! This is not a malfunction of
the system!
Precautions for use
Installation
- Unpack all parts and remove protective material.
- Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
- Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
- Insert the DC plug (24.) to the DC jack (22.) of the charger docking station, then connect the AC/DC adaptor (23.) to AC outlet.
- Put the main unit on the charger docking station for charging.
- Turn on the unit by pressing the On/Off button (3.), if the LCD display is on with text, it means the power supply is normal. Now your system is ready to play the music.
Remarks:
- To safe the battery life of the built-in rechargeable battery, the unit will turn off after power off if disconnected with the charger station. And the remote cannot is not able to power on the unit if the unit is dis-connected with the charger station. Press the On/Off button (3.) of the main unit to switch on the unit in this condition.
- It is recommended to connect the unit to the charger station for home use. So that the unit can stay at Standby mode after turn off the unit and can use the remote control to Setting the Time & Date The clock will synchronize to RDS/DAB clock once receiving the RDS/DAB signal if the clock was not set in advance.
Follow the below steps to set the time and date manually.
- Turn on the unit by pressing the On/Off button (3.), then press the Mode button (7.) to select FM or DAB mode.
- Press the Menu button (2.) and press Tune + / – (4) button to select
, press Enter button (8.) to confirm. - The display will show
- The display will show <Set time/Date>, press Enter button (8.) to enter.
- Set the hour and minitues by pressing Tune + / – (4) button and press the Enter button (8.) to confirm.
- The display will change to “Set date 1-1-2020”. Then set the day / month / year by pressing Tune + / – (4) button and press the Enter button (8.) to confirm.
- The display will show
- Under the
Please follow the below breakdown of the menu for operation.
Pressing Tune + / – (4) button to select and press the Enter button (8.) to
enter/confirm.
Press Menu button (2.) again to quite the setting.