ND TACKLE TH9S Anti-Theft Alarm User Manual
- June 10, 2024
- ND TACKLE
Table of Contents
ND TACKLE TH9S Anti-Theft Alarm
Product Information
The TH9s Anti-Theft Alarm is a security system that is designed to protect your valuable items from theft. This alarm system consists of an anti-theft alarm and an R9s or S9r receiver. The anti-theft alarm can be registered with the receiver to receive alerts when the item that the alarm is attached to is moved or disturbed. The TH9s Anti-Theft Alarm is also compatible with B10 Smart Bite Watch, SMART BAND B9, H9pro Headtorch, and H10 Headtorch.
Overview
- T1. Power On(Off)
- Left: Remote control mode (Silent mode)
- Middle: OFF
- Right: Remote control mode
- T2. Infrared sensor
- T3. LEDs
- T4. Halo for low power
- T5. Turn On/Off LEDs
- hold press: turn off the anti-theft function
- T6. CR2*2
- T7. High-Quality Cone Speaker
Product Usage Instructions
R9s Receiver
- Turn on the R9s receiver.
- Press and hold the multi-function button on the receiver to enter the system menu.
- Scroll down and choose the “Register Alarm” menu.
- We recommend to start with A-EFT CHA1. Press the button down to select the channel.
- Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3, A-EFT CHA4). It is recommended to start with A-EFT CHA1.
- Turn on the TH9s Anti-Theft Alarm.
- Press the right button on the TH9s twice.
- Press the right button on the TH9s twice and press the ANTI THEFT button.
- Registration is successful when the display shows “SUCCESS”.
S9r Receiver
- Turn on the S9r receiver.
- Press and hold the multi-function button on the receiver to enter the system menu.
- Scroll down and choose the “Register Alarm” menu.
- Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3, A-EFT CHA4). It is recommended to start with A-EFT CHA1. We recommend to start with A-EFT CHA1. Press the button down to select the channel.
- Turn on the TH9s Anti-Theft Alarm.
- Press the right button on the TH9s twice.
- Press the right button on the TH9s twice and press the ANTI THEFT button.
- Registration is successful when the display shows “SUCCESS”.
B10 Smart Bite Watch
- Turn on the B10 Smart Bite Watch.
- Press and hold the menu button on the receiver to enter the system menu.
- Scroll down and choose the “Register Alarm” menu.
- Choose one of the A-EFT channels (A-EFT CHA1, A-EFT CHA2, A-EFT CHA3, A-EFT CHA4). It is recommended to start with A-EFT CHA1. We recommend to start with A-EFT CHA1. Press the button down to select the channel.
- Turn on the TH9s Anti-Theft Alarm.
- Press the right button on the TH9s twice.
- Press the right button on the TH9s twice and press the ANTI THEFT button.
- Registration is successful when the display shows “Reg SUCCESS”.
SMART BAND B9
-
Turn on the Smart Band B9 by pressing and holding the button for a few seconds.
-
Turn on the TH9’s anti-theft alarm.
-
Press the button twice to activate register mode. The LED will flash red.
-
Switch through the channels by pressing the button once. You must press the button briefly until the purple LED flashes.
Note: The purple channel is the anti-theft channel. -
When the purple LED flashes, press and hold the button for 3 seconds until the LED lights up continuously.
-
Press the button on the TH9s twice.
-
Turn on the TH9s Anti-Theft Alarm.
-
Press the right button on the TH9s twice and choose A-EFT1.
-
Registration is successful when the LED lights up again and the band vibrates.
H9pro Headtorch
- Turn on the H9pro.
- Turn on the Anti-Theft Alarm.
- Enter register mode on the H9pro by pressing the button on the H9pro three times. The LED on the H9pro will flash.
- Press the right button on the TH9s twice.
- Registration is successful when the LED lights up.
H10 Headtorch
- Turn on the H10 headtorch.
- Turn on the TH9s Anti-Theft Alarm.
- Enter register mode on the H10 by pressing and holding the two buttons down for 5 seconds. The LED on the headtorch will flash.
- Press the right button on the TH9s twice.
- The registration was successful when the LED lit up.
Bivvy Light
- Turn on the bivvy light.
- Turn on the Anti-Theft Alarm
- Double-click the button of the bivvy light; the light will flash red.
- The flashing color indicates the channel. You can switch between the channels by clicking on the button. You must select the purple channel.
- As soon as the Bivvy light flashes in purple, press the button on the TH9s Anti-Theft Alarm. The purple channel is the Anti-Theft channel.
- The light will shortly flash when the operation was successful.
Air Light Sounder (ALS)
- Turn on the ALS.
- Turn on the TH9s Anti-Theft Alarm.
- Enter register mode on the ALS: long press the M button until you hear a tone. The LED on the ALS will flash red.
- Press the button on the TH9s twice.
- Registration was successful when the RED LED lit up.
Contact Information
- Email: Info@newdirectiontackle.co.uk.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>