Whirlpool WL S7960 NE 60cm 4 Zones Induction Hob Instruction Manual

WL S7960 NE 60cm 4 Zones Induction Hob
Instruction Manual

SAFETY INSTRUCTIONS

Download the complete instruction manual on  http://docs.whirlpool.eu or call the phone number shown on the warranty booklet.

Before using the appliance, read these safety instructions. Keep them nearby for future reference.
These instructions and the appliance itself provide important safety warnings to be observed at all times. The manufacturer declines any liability for failure to observe these  safety instructions, for inappropriate use of the appliance or incorrect setting of controls.
WARNING: If the hob surface is cracked, do not use the appliance – risk of electric shock.
WARNING: Danger of fire: Do not store items on the cooking surfaces.
CAUTION: The cooking process has to be supervised. A short cooking process has to be supervised continuously.
WARNING: Unattended cooking on a hob with fat or oil can be dangerous – risk of fire. NEVER try to extinguish a fire with water: instead, switch off the appliance and  then cover flame e.g. with a lid or a fire blanket & Do not use the hob as a work surface or support.
Keep clothes or other flammable materials away from the appliance, until all the components have cooled down completely – risk of fire.
Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
Very young children (0-3 years) should be kept away from the appliance. Young children (3-8 years) should be kept away from the appliance unless continuously supervised. Children from 8 years old  and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance only if they are supervised or have been given instructions on safe use and understand the hazards involved. Children must not play with the appliance. Cleaning and user  maintenance must not be carried out by children without supervision.
After use, switch off the hob element by its control and do not rely on the pan detector.
WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall  be kept away unless continuously supervised.

PERMITTED USE
A CAUTION: the appliance is not intended to be operated by means of an external switching device, such as a timer, or separate remote controlled system.

ELECTRICAL WARNINGS
It must be possible to disconnect the appliance from the power supply by unplugging it if plug is accessible, or by a multi-pole switch installed upstream of the socket in accordance with the wiring rules and the appliance must be earthed in conformity with national electrical safety standards.
Do not use extension leads, multiple sockets or adapters. The electrical components must not be accessible to the user after installation. Do not use the appliance when  you are wet or barefoot. Do not operate this appliance if it has a damaged power cable or plug, if it is not working properly, or if it has been damaged or dropped.
Installation using a power cable plug is not allowed unless the product is already equipped with the one provided by the Manufacturer.
If the supply cord is damaged, it must be replaced with an identical one by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard – risk of electric shock.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched off and disconnected from the power supply before performing any maintenance operation; never use steam cleaning  equipment – risk of electric shock.
Do not use abrasive or corrosive products, chlorine-based cleaners or pan scourers.

DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and is marked with the recycle symbol.
The various parts of the packaging must therefore be disposed of responsibly and in full compliance with local authority regulations governing waste disposal.

INSTALLATION

ELECTRICAL CONNECTION

Electrical connection must be made before connecting the appliance to the electricity supply.
Installation must be carried out by qualified personnel who know the current safety and installation regulations. Specifically, installation must be carried out in compliance  with the regulations of the local electricity supply company.
Make sure the voltage specified on the data plate located on the bottom of the appliance is the same as that of the home.
Regulations require that the appliance be earthed: use conductors (including the earth conductor) of the appropriate size only.

=E| yellow/green
N| blue

PRODUCT DESCRIPTION

1. Cooktop
2. Control panel

CONTROL PANEL

1. Symbols/activation of special functions| 6. FLEXICOOK button| 11. Cooking time indicator
---|---|---
2. Cooking level selected| 7. Indicator light – function active| 12. OK/Key lock button – 3seconds
3. Cooking zone off button| 8. On/Off button| 13. Timer active indicator
4. Scroll keypad| 9. Timer| 14. Zone selection indicator
5. Fast heating button (Booster)| 10. 6th Sense button| 15. Timer indicator symbol

ACCESSORIES

POTS AND PANS

Only use pots and pans made from ferromagnetic material which are suitable for use with induction hobs:

• enamelled steel
• cast iron
• special pots and pans in stainless steel, suitable for induction cooking

Check for the symbol (usually stamped on the bottom) to determine whether a pot is suitable. A magnet may be used to check whether pots are magnetic.
The quality and the structure of the pot base can alter cooking performance.
Some indications for the base’s diameter do not correspond to the actual diameter of the ferromagnetic surface.
Some pots and pans have only a part of the bottom in a ferromagnetic material, with parts in another material not suitable for induction cooking.
These areas may heat up at different levels or lower temperatures. In certain cases, where the bottom is made mainly of non-ferromagnetic materials, the hob might not  recognise the pan and therefore not switch on the cooking zone.

To ensure optimum efficiency, always use pots and pans with a flat bottom that distributes the heat evenly. If the bottom is uneven, this will affect power and heat conduction.

Empty pots or pots with a thin base
Do not use empty pots or pans when the hob is on. The hob is equipped with an internal safety system that constantly monitors the temperature, activating the “automatic  off“ function where high temperatures are detected. When used with empty pots or pots with thin bases, the temperature may rise very quickly, and the “automatic off“  function may not be triggered immediately, damaging the pan or the hob surface. If this occurs, do not touch anything and wait for all components to cool down.
If any error messages appear, call the service centre.
Minimum diameter of pot/pan base for the different cooking areas
To ensure that the hob functions properly, use pots of a suitable minimum diameter (refer to the table below).
Always use the cooking zone that best corresponds to the minimum diameter of the bottom of the pot.
Place the pot making sure it is well centered on the cooking zone in use.
It is recommended not to use pots that exceed the perimeter of the cooking zone in use.

ADAPTER FOR POTS/PANS UNSUITABLE FOR INDUCTION
Using this accessory makes it possible to use pots and pans that are not suitable for induction hobs. It is important to bear in mind that using it affects efficiency and,  consequently, the time needed to heat food. Its use should be limited because the temperatures reached on its surface depend significantly on the pot/pan used, its flatness  and the type of food being cooked. Using a pot or pan with a smaller diameter than the adapter disc may cause heat to build up that is not transmitted to the pot or pan,  which could blacken both the hob and the disc. Adapt the diameter of your pots/pans and the hob to the diameter of the adapter.

FIRST TIME USE

POWER MANAGEMENT
At the time of purchase, the hob is set to the maximum possible power.
Adjust the setting concerning the limits of your home’s electrical system as described in the following paragraph.
N.B: Depending on the power selected for the hob, some of the cooking zone power levels and functions (e.g. boil or fast heating) could be automatically limited to prevent  the selected limit from being exceeded.
To set the power of the hob:
Once you have connected the device to the mains power supply, you can set the power level within 60 seconds.
Press the far right timer “+“ button for at least 5 seconds. The display shows “PL“. Press the OK 3 sec button to confirm .
Use the “+“ and “−“ buttons to select the desired power level.
The power levels available are: 2.5 kW – 4.0 kW – 6.0 kW – 7.2kW.
Confirm by pressing OK 3 sec.
The power level selected will stay in the memory even if the power supply is interrupted.
To change the power level, disconnect the appliance from the mains for at least 60 seconds, plug it back in, and repeat the above steps.

If an error occurs during the setting sequence, the “EE“ symbol will appear, and you will hear a beep. If this happens, repeat the operation.
If the error persists, contact the After-Sales Service.
ACOUSTIC SIGNAL ON/OFF
To switch the acoustic signal on/off:

• Connect the hob to the power supply;

• Wait for the switch-on sequence;

• Press the “P“ button of the first scroll keypad at the top left for 5 seconds.
  Any alarms set will remain active.
  DEMO MODE reheating deactivated, see the section on ”Troubleshooting”)
  To switch the demo mode on and off:

• Connect the hob to the power supply;

• Wait for the switch-on sequence;

• Within the first minute, press the fast heating button “P“ of the bottom left keypad for 5 seconds (as shown below);

• “DE“ will show on the display.

DAILY USE

SWITCHING THE HOB ON/OFF
To turn the hob on, press the power button for around 1 second. To turn the hob off, press the same button again, and all cooking zones will be deactivated.
POSITIONING
Do not cover the control panel symbols with the cooking pot.
Please note: In the cooking zones close to the control panel, it is advisable to keep pots and pans inside the markings (taking both the bottom of the pan and the upper edge  into consideration, as this tends to be larger).
This prevents excessive overheating of the keypad. When grilling or frying, please use the rear cooking zones wherever possible.

ACTIVATING/DEACTIVATING COOKING ZONES AND ADJUSTING
POWER LEVELS
OFF—————————–18 P
To activate the cooking zones:
Move your finger horizontally across the scroll keypad (SLIDER) of the required cooking zone to activate it and adjust the power. The level will be shown in line with the area and the indicator light identifying the active cooking zone. The ”P” button can be used to select the fast heating function (Booster).

To deactivate the cooking zones:
Select the “OFF“ button at the beginning of the scroll keypad.

CONTROL PANEL LOCK
To lock the settings and prevent it from accidentally switching on, press and hold the OK/Key lock button for 3 seconds. A beep and a warning light above the symbol  indicate that this function has been activated. The control panel is locked except for the switching off function ( ). To unlock the controls, repeat the activation procedure.

TIMER
There are two timers – one controls the left-hand cooking zones, while the other controls the right-hand cooking zones.
To activate the timer:
Press the “+“ or “−“ button to set the desired time on the cooking zone in use. An indicator light will be activated in line with the specific symbol.
Once the set time has elapsed, a beep will sound, and the cooking zone will switch off automatically.
The time can be changed at any point, and several timers can be activated simultaneously.
In case 2 timers on the same side of the hob are activated simultaneously, “Zone selection indicator“ flashes and the relative cooking time selected is displayed on the central display.
To deactivate the timer:
Press the “+“ and “−“ buttons together until the timer is deactivated.
TIMER INDICATOR
This LED (when ON) indicates that the timer has been set for the cooking zone.

FUNCTIONS

FLEXICOOK
By selecting the “FLEXICOOK“ button, you can combine two cooking zones and use them at the same power by covering the entire surface with a large pot or partially with a round/oval pot.
The function always remains on and, when using only one pot, can be moved over the entire area. In this case, both left-hand scroll keypads can be used indifferently.
Ideal for cooking with oval or rectangular pots or with pan supports.
To deactivate the function, press the “FLEXICOOK“ button.
N.B. Special functions cannot be selected when using this feature.
IMPORTANT: Place the pots in the center of the cooking zone so that they cover at least one of the reference points (as shown below).

6th SENSE
The function is activated once the
button has been pressed to confirm.
To select another special function, press “OFF“ and then the “6th Sense“ button to choose the required function.
To deactivate the special functions and return to manual mode, press “OFF“.
The power level when using special functions is pre-set by the hob and cannot be modified.

MELTING
This function allows you to bring food to the ideal temperature for elting and maintain the food condition without the risk of burning.
This method is ideal, as it does not damage delicate foods such as chocolate and prevents them from sticking to the pot.

KEEP WARM
This feature allows you to keep your food at an ideal temperature, usually after cooking is complete or reducing liquids very slowly.
Ideal for serving foods at the perfect temperature.

BOILING
This function allows you to bring water to the boil and keep it boiling, with lower energy consumption.
About 2 litres of water (preferably at room temperature) should be placed in the pan.
In all cases, users are advised to monitor the boiling water closely and check the amount of water remaining regularly.
If the pots are big and the water quantity is higher than 2 litres, we recommend using a lid to optimize boiling time.

INDICATORS

RESIDUAL HEAT
If “H“ appears on the display, this means that the cooking zone is hot.
The indicator lights up even if the zone has not been activated but has been heated due to the adjacent zones’ use or because a hot pot has been placed on it.
When the cooking zone has cooled down, the ”H” disappears.

POT INCORRECTLY POSITIONED OR MISSING
This symbol appears if the pot is not suitable for induction cooking, is not positioned correctly or is not of an appropriate size for the cooking zone selected. If no pot is  detected within 30 seconds of making the selection, the cooking zone switches off.

COOKING TABLE

The cooking table offers an example of the cooking type for each power level. The actual delivered power of each power level depends on the cooking zone dimension.

POWER LEVEL| TYPE OF COOKING| LEVEL USE
(indicating cooking experience and habits)
---|---|---
Maximum
power| P| Fast heating/Booster| Ideal for rapidly increasing food temperature to a fast boil (for water) or for rapidly heating cooking liquids.
| 14 – 18| Frying – boiling| Ideal for browning, starting to cook, frying deep-frozen products, bringing liquids to the boil quickly.
Browning – sautéing – boiling
– grilling| Ideal for sautéing, maintaining a lively boil, cooking and grilling.
10 – 14| Browning – cooking – stewing –
sautéing – grilling| Ideal for sautéing, maintaining a gentle boil, cooking and grilling, and preheating accessories.
Cooking – stewing – sautéing –
grilling – cooking until creamy| Ideal for stewing, maintaining a gentle boil, cooking and grilling (for longer periods).
5 – 9| Cooking – simmering –
thickening – creaming| Ideal for slower-cook recipes (rice,sauces,roast,fish) with liquids (e.g. water, wine, broth, milk), and for creaming pasta.
Ideal for slow-cook recipes (quantities under 1 litre: rice, sauces, roasts, fish) with liquids (e.g. water,wine,broth,milk).
1 – 4| Melting – defrosting| Ideal for softening butter, gently melting chocolate, thawing small items.
Keeping food warm – creaming
risotto| Ideal for keeping small portions of just-cooked food or serving dishes warm and for creaming risotto.
Zero
power| OFF| –| Hob in stand-by or off mode (possible end-of-cooking residual heat, indicated by an “H”).

MAINTENANCE AND CLEANING

WARNING

• Do not use steam cleaning equipment.
• Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H“) is not displayed.

Important:

• Do not use abrasive sponges or scouring pads as they may damage the glass.
• After each use, clean the hob (when it is cool) to remove any deposits and stains from food residue.
• A surface that is not kept suitably clean may reduce the sensitivity of control panel buttons.
• Use a scraper only if residues are stuck to the hob. Follow the scraper manufacturer’s instructions to avoid scratching the glass.
• Sugar or foods with high sugar content can damage the hob and must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a special hob cleaner (follow the Manufacturer’s instructions).
• Spills of liquid in the cooking zones can cause the pots to move or vibrate.
• After cleaning the hob, dry thoroughly.

If the iXelium™ logo appears on the glass, the hob has been treated with iXelium™ technology, an exclusive Whirlpool finish which ensures perfect cleaning results, as well  as keeping the surface of the hob shiny for longer.
To clean iXelium™ hobs, follow these recommendations:

• Use a soft cloth (microfibre is best) dampened with water or with everyday glass cleaning detergent.
• For best results, leave a wet cloth on the glass hob surface for a few minutes.

TROUBLESHOOTING

• Check that the electricity supply has not been shut off.
• If you cannot turn the hob off after using it, disconnect it from the power supply.
• If alphanumeric codes appear on the display when the hob is switched on, consult the following table for instructions.

The cookware is not well positioned on the cooking zone, or it is not compatible with one or more cooking zones.| Press On/Off button twice to remove the FOE1 code and restore the functionality of the cooking zone. Then, try to use the cookware with a different cooking zone, or use different cookware.
FOE7| Wrong power cord connection.| The power supply connection is not exactly as indicated in “ELECTRICAL CONNECTION” paragraph.| Adjust the power supply connection
according to “ELECTRICAL CONNECTION”
paragraph.
FOEA| The control panel switches off because of excessively high temperatures.| The internal temperature of electronic parts is too high.| Wait for the hob to cool down before using it again.
FOE9| The cooking zone turns off when the temperatures are too high.| The internal temperature of electronic parts is too high.| Wait until the cooking area has cooled off before using it again.
FOE2, FOE4, FOE6, FOES, FOEC, Fl E1, F2E1, F6E1, F6E3, F7ES, F7E6| Disconnect the hob from the power supply.
Wait a few seconds then reconnect the hob to the power supply.
If the problem persists, call the service centre and specify the error code that appears on the display.
d E
[when the hob is off]| The hob does not switch heat up. The functions do not come on.| DEMO MODE on.| Follow the instructions in the “DEMO MODE” paragraph.
e.g. 0→-| The hob does not allow a special function to be activated.| The power regulator limits the power levels in accordance with the maximum value set for the hob.| See paragraph “Power management”.
e.g.
(Power level lower than
level requested)| The hob automatically sets a minimum power level to ensure that the cooking zone can be used.| The power regulator limits the power levels in accordance with the maximum value set for the hob.| See paragraph “Power management”.

SOUNDS PRODUCED DURING OPERATION

Induction hobs may whistle or creak during normal operation.
These noises actually come from the cookware and are linked to the pan bottoms’ characteristics (for example, when the bottoms are made from different layers of material or are irregular).
These noises may vary according to the type of cookware used and the amount of food it contains and not the symptom of something wrong.

AFTER SALES SERVICE

To receive complete assistance, please register your product on www.whirlpool.eu/register.
BEFORE CALLING THE AFTER-SALES SERVICE:

1. See if you can solve the problem by yourself with the help of the TROUBLESHOOTING suggestions.
2. Switch the appliance off and back on again to see if the fault persists.

IF AFTER THE ABOVE CHECKS THE FAULT STILL OCCURS, GET IN TOUCH WITH THE NEAREST AFTER-SALES SERVICE.
To receive assistance, call the number shown on the warranty booklet or follow the website’s instructions on www.whirlpool.eu.
For markets outside Europe:
To register your product and to receive more comprehensive local help and support, please call the number shown on the warranty booklet specific to your country or follow the website’s instructions on:
Singapore: www.whirlpool.com.sg
When contacting our Client After sales service, always specify:

• a brief description of the fault;
• the type and exact model of the appliance;
• the serial number (number after the word SN on the rating plate located under the appliance). The serial number is also indicated in the documentation;

• your full address;
• your telephone number.

If any repairs are required, please contact an authorized after-sales service (to guarantee that original spare parts will be used and repairs carried out correctly).
In the case of flush-mounted installation, call the After Sales Service to request assembly of screws kit 4801 211 00112.
In case of installation not over a built-in oven, you can call the After Sales Service to buy the divider kit C00628720 (cooktop 60 and 65 cm) or C00628721 (cooktop 77 cm).
If you prefer not to buy the divider kit please ensure that a separator is installed according to the installation instructions.

References

• Whirlpool Docs
• Whirlpool Singapore | Home appliances | Kitchen appliances | Electrical Appliances
• | Whirlpool Europe
• Register | Whirlpool Europe

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>