OMG Neos 2 14 AC Reach Truck Instruction Manual

: June 10, 2024
: OMG

Table of Contents

Neos 2 14 AC Reach Truck
Product Information
Specifications

Neos 2 14 AC Reach Truck

Product Information

The Neos ll Reach Truck is an advanced piece of equipment
designed to offer excellent performance in all working conditions.
It has a robust mono block chassis construction for maximum
stability and superior mechanical strength. The drive units,
electronic controls, and lift masts meet the highest quality
standards to create a reliable and satisfactory product. The reach
truck has a powerful and quiet lift motor, and all hydraulic
functions are controlled by finger-tips for precise and safe load
handling by the operator.

Specifications

Manufacturer: Neos ll
Model: L.3 Drive L.4
Operator type: Reach Truck
Load capacity/rated load: N/A
Load center distance: N/A
Wheelbase: N/A
Service weight incl. battery: N/A
Axle loading, laden front/rear: N/A
Axle loading, mast advanced, laden front/rear: N/A
Axle loading, mast retracted, laden front/rear: N/A
Tires: N/A
Tire size, front: N/A
Tire size, rear: N/A
Wheels, number front/rear (x = drive wheels): N/A
Track width, front: N/A
Track width, rear: N/A
Fork carriage tilt forward/backward: N/A
Mast lowered height: N/A
Free lift: N/A
Lift height: N/A
Mast extended height: N/A
Overhead load guard (cab) height: N/A
Seat height: N/A
Height of wheel arms: N/A
Overall length: N/A
Length to face of forks: N/A
Overall width: N/A
Forks dimensions: N/A
Fork carriage ISO 2328, class/type A, B: N/A
Fork carriage width: N/A
Width over forks: N/A
Distance between support arms: N/A
Reach distance: N/A

Product Usage Instructions

The Neos ll Reach Truck is designed for efficiently lifting and
transporting heavy loads in a warehouse or industrial setting. Here
are some usage instructions:

Make sure that the battery is fully charged and installed
correctly.
Inspect the reach truck for any visible damage or defects
before use.
Wear appropriate safety gear, including a hard hat and
steel-toed boots.
Ensure that the area around the reach truck is clear of any
obstructions or hazards.
Adjust the steering wheel to your desired position for
comfortable and safe operation.
Use the finger-tips controls to operate the hydraulic functions
and lift motor for precise and safe load handling.
Make sure the load is properly secured on the forks before
lifting it.
Slowly lift the load to the desired height and use the
finger-tip controls to tilt the fork carriage forward or backward
for safe transport.
Follow all safety procedures and guidelines when operating the
reach truck, including keeping a safe distance from other equipment
and personnel, and not exceeding the load capacity.
When finished using the reach truck, park it in a designated
area and turn it off.
Perform regular maintenance checks, as outlined in the user
manual, to ensure the reach truck remains in good working
condition.

Following these usage instructions will help ensure safe and
efficient operation of the Neos ll Reach Truck.

L==:ii:::::a:::i:-n:’..::-:-::i::.::-:=
lB’:,::,:,:*

tr t-& 1” ***. e,#

ffi,#,s,**, &ss ffi
https://www.besttruckmanuals.com/

:Iliadii:ii{rq:{tt:-::,ri.r+}iiir9,jill :i

ll Reachrruck NgoS L4.-16’2Aac
!i:tii:::i:it$i:-::r:j,r,j*/lrliji}fr.iB_4iiiqr

Neos ll represents the ullimate in reach trucks available on the market, capable of offering exeellent performance under all working conditions. [ach component is pl’operly tested and subjected to the final tests in order to achieve a corirpelitive and salisfactory product. The drive units, electronic controls and lift masts confirm to the highest quality standards, constrluling a reai asset to this type of product.
Chassis
The mono blcc chassis construclion ensures maximurn stability and superior mechanieal strength in all drive and stacking siiuations, maintaining high resi.dual capacities even at maximum heights. The baltery compartment ls easily accessible by lifting the bulkhead, simplifying
daily :rd periodical checks and recharging. The standard lateral battery
removal sysaem cn rollers simplilies battery repiacement for heavy duty use 0ver sever:l work shifts.
Drive Reli:ble sensor less lhree phase clt.rent traction drive motors able lo meet th most dernanding performance requirernents, delivering the necessary power uncler all load condilicns as the

traction speed exactly depends cr iie posttron of accelerator perlal.
Steering wheel
!lectronic steering wheel wlth electronrc components and motor granling safe and sllent operatrons io be acied llith a minimum force. Steering wheel which can be longitudinaily adjusted for an excellent driving comfort. Possibility to select the driving way at 180″ and 360′ simply pressing on the desired push butlon.
Hydraulic functions Powerful and noiseless lift motor in alternated current ac controlled by proportional solenoids which regulates the pump rpm, always providing the right quantity of oil. All the hydraulic functions are controlled by finger tips which ensqre precise and safe load handling for the operator. Lifting gear wiih integrated braking system grantjng gradual slow down at end of travel avoiding rough stops which could compromise load stability.

https://www.besttruckmanuals.com/

1.1 Manufacturer
xK 1″.1″ Model L.3 Drive L.4 operator type 1.5 Load capa.ity / rated !oad 1.6 Lrad centre di:tance 1.8 l-oad distanee {.entre of load axle to fork faceJ
Mast pushed lorward
1.9 Wheelbase
2.1 Service weight inel. battery (see line 6.5i 2.3 Axle lcadiag, r-inladen front/rear 2.& Axle loading, mast advanced, laden iront lrear
K 2.5 Axle loading, masl ,etracted, laden front /rear 3.1 Tires 3.2 Tire size, frOnt 3.3 T;ro size, rear 3-5 Wheels, number front I rear ix – Crive n wheels) 3.6 Track width, front 3.7 Irack width, rear
4.7 Fork carriage tilt forward /backward 4.2 Mast lowered height 4.3 Free lift 4.4 Lift height 4,5 Mast extended height 4.7 Overhead load guard (cab) height 4.8 Seat height 4.lO Height of wheel arms 4.19 Overall length
4.20 Length to face of forks 4.)l Ove’allwidth 4.72 Forks dimensions
4.23 Fork carriage ISO 2328, class /type A, B 4.24 Fork carrlage width
4.25 Width over forks 4.26 Distance between support arms 4.28 Reach distance
4.31 Ground clearance under mast, la{en
4.32 Ground clearance, centre of wheelbase 4.33 Aisle width fr:r pallets 1000 x 1200 crossways
4.34 Aisle widlh ior pallets 800 x 1200 lengthways
Truck diagonal
4.35 Turning radius 4.37 Lnglh across wheel arnrs
5.1 lravel speed laden / unladen
K 5.2 lillirg speed iaden,/ unladen 5.3 lowering speed laden / r-;niaden 5.4 Reach speed, iaden lunlaCen 5.8 Max gradient performance 5.9 Accele.ation time, laden lunladen 5.1C Service brake
Kw 5.11 Parking brake 6.1 Traction motor, .atng 52 60 min .2 Liit motot rating 33 15% 6.3 Eallery ac.ording to DtN 43531 I 35 / 36 A, 8, C, no 5.4 Sattery voltage, nominal capacity (5 6.5 Saltery weight ‘6.6 [nergy consu,’nptinn according to VDI cycle
8.1 Type of drive eontrol 8.7 Operating pressure for attachments 3.3 Oil volume for atta.hments 8.4 Scund level at driver’s ear according to fN 12 053

a

t

a

mal

x

mm

x1

mm

mm (,8-

mm

n”
bro rnm brr tnm

c/9

hr firn

hz iarrl

h: mm

h* mm

hr mm

ht rnm

hs rm

lt

mrrr

lz rnrn

htlbz mm

s/e/l mm

b: mm

bs mm

ba mrn

la mnr

m1 mm

m2 mm

Asl mm

Ast mm

D

rnrn

Wa mfi

i:

nrrn

kmlh

m/s

rr,/s
o/n
s

Neos ll 1″4 a.
1.4
21E
:,..345 3.350
2.1s0 / 1.2C0 124 I 4.028 1.846 / 2.908
tnn
, EA

OMG S.r.i. Neos ll 16 ac
ie.tai. seal 1.6
OUU
qZJ
zza L.47A
3.800
236A / L140 942 I 4.76A
r.96A 13.44A vu ikollan 343 350 LX/Z

Neo. ll 20 at
2.4
A1<
1.470 3.900
2.432 / 7.448 735 /5.16s 2.275 /3.62s
343 ?(n

1.177
275 2.475 1.275 1″.270 40/rcol1.1so

3ls
2.665 2.060 5.960 6.620 ) 1nn
1.C50 225
2,&70 L.320 r.274
41lnAl 7.150
2/A
, B40

1 .182
22
2.474
A. ALU
1.274
40/r7a/ t.$a

948

533

655

75 2″685 2.725

75 2.775 2.81.2

75
2″775 1 ar )

1.610 1 1an
13/13 0.35 / 0.s0
10/ 15
a le ctri c

L.740 1.970
0.3s l0.so 0.50 / 0.4s 0.10 / 0.10
B /2a e/G
hydraulic

1″.740 1.970
13113 3s 10.s0
1″3 120
hydraulic

kw kw
v/Ah kg
kw/h
bar i/min d B(A)

48 / 465
700

6.5 15 n1] 48 I 62A
950
inverter AC 180
<74 * option

48 / 620
oqn

https://www.besttruckmanuals.com/

Denomination

Mast lowered Lift heighl
height

mm mrn mm rnm

Triplex-FfL

rrm n’im mm mm mm mrn

available on requsst

h1 2.085 2.185 2.415 2.665
2.y5
3.190 3.490 3.825 4.0?0 4.230

L-
4.L60 &.468 5.160 c oan
6.560 7.450 8.210 8.960 9.460 10.460

Total Mast lift height e{ended

h;+s

height ha

4.200 4.820

4.500 5.120

5.200 5.820

5.000 6.620

6.700 7.320

7.500 8.120

8.250 8.B7rl

9.00c 9.620

9.500 10.120

10.500 1,1,.3.20

Free lift
hz 1.474 1.570 1.300 2.050 2.3LA 2.580 2.B80 3.22A 3.400 3.62A

Fork carriage tilt forwardl
backward alt3 (“)
3/s 3/s 3/5
315
315 315
315
3ls 3/5
315

with side-shift (t) c.600 mm

Neos Il 14 ac Neos ll 16 ac Neos ll 20 ac

1.4

1.5

2.0

L.4

a_o

2.0

1″6

1″9

1A

1.O

f . /)

1”.1

1.5

1.6

1 ?q

1.5

L”0

1.4

1.5

1.0

t.2

L.1

0.80

lriri’l;
I
‘i.:

1B’

.,,r

rnullif unctions m0nojoystick flashing beacbn with reverse buzzer tilting on forks holder piate “tlting forks” intcgrated side-snift battery side extraetion single battery stand with wheels digital lifting height indicator and pre-selector ior l-0 levels automatic side-shift centraiising automatic horizontal positioning of forks camera on the forks witn cotor monitor inside the cab camera on the forks holder plate with coior monitor inside the cal:

standard

option

I

all weather metal cab

:

metal cab for cold store execution

ffi aold store execution

ffi heating system for cold store cab

ffi
ture

24V heated seat

r wider stradd!e legs for larger pallets

adjustable spot lamps

I load protection guard

I safety belt

I pin access keypad

TI addirional hydraulic function

https://www.besttruckmanuals.com/

N
I IIIIII:I I:

Masts
The masts are constructed lrom wrap around external seclion to ensure torsional and bending rigidity, and are available with the following characteristics:

. triplex with full free lift large total free lift and lifting heights avallabie

from 4.160 to 10.460 rnrn, and more on request;

.
.

tilting forks integrated

holder lateral

plate {Tilring Forks); shift to avoid forward

movement

r:f

the

centre

of

gravity and rnaintain optirnum residual capacities at all lifting heights.

Brakes lndependent braking systems throughout the range:
. electric braking with energy recovery on reversal of direclion of travel;
. electric braking with energy recovery on release of the accelerator pedai;
constituting a real asset to this type of product.

. automatic parking brake with drive inhibition; . hydrautic braking on drive wheel. . hydraulic braking on load wheels {Neos ll 16 and 20 ac only)

flectronic system

The enlire Neos ll range is equipped with lnverter electronic equipments

with 3 different braking systems:

” .

releasing reversing

the the

accelerator direction of

pedal; travel;

. pressing the braking pedal.

These controls monitor all the rnachinet funcfions and allow any adjustments
io optimise lhe performance of the machine, adapting it to the type of

work it has to carry out. All the parameters relating to drive, braking and hydraulic funclions are electronicelly adjustable by the dashboard of

the remote desktop directly from OMG according to the different customer

needs.

Operator’s d riving position
. adjustable comlort seat; . longitudinally adjustable steering wheel; . anli slippery operator’s feet platform; . LCD display showing the following necessary data for the manoeuvre:
– parking brake indicator; – warning lights (neutral posilion, controller overheating, motor overheafing); – operatrng hours indicator; – speedometer; – “ON” indicator for the slow traction (turtle push button); – different power output ways [/S/H, E=economy S*standard E=super, – battery charge indicator.
Finger tip The hydraulic funcfions by finger tip ensure the operator to make a precise and safe load handling.

Battery side extraction The battery is easily accessible by lifting the compartment door controls, standard battery side extraction on rolls lacilitates its replacement for heavy applications and different working shifts.

Head Office

PusatNiagaCibodasBlokENo. 12-l4AJln.RayaGatotSubrotoKm.3,5
5512674 Phone:021-55761997,5511825,5512096,5512694,
Fax:021 -55761998

– ‘ fi*@ Tangerang-Banten E #figHil p

Email: info@kharismaesaunggul.com
https://www.besttruckmanuals.com/

https://www.besttruckmanuals.com/

SOLE DISTRIBUTOR:

.-t PT KHARISMA ESA ANGGUL

ll7

DIATERTA L rrAlvnLnyc E eLrrpt[E N T

Head Office
Pusat Niaga Cibodas Blok E No. 12-14 A Jln. Raya Gatot Subroto Km. 3,5 Tangerang – Banten Phone: 021-55761997, 5511825
55’t 2096, s51 2694, s51267 4 Faxi 021 – 55761998 Email: info@kharismaesaunggul.com

Branch Office Cikarang : Jln. Samsung 2 A blok C.5B Cikarang, Jababeka Bekasi – Jawa Barat 17835 Phone : O21 -2909421A, 290942’19 Fax: O21-29O9422O

Surabaya : Komplek Pergudangan Sinar Budaran ll blok B No. 11 Jln. Raya Lingkar Timul Sidoarjo – Surabaya Phone :031-8946860, 8946854 Fax : 03’l-8059659

Medan ; Kawasan lndustri Mabar (KlM) Jln. Sumatera No.148 Komplek Ruko Malindo – Medan Phone:061 -6858 532,6858 155 Fax: 061 – 6858 463
Ruko Puri Anjasmoro Blok D2 No. 1 B Semarang Phone : 024-76670687, 76670697

Makassar : Jln. Kapasa Raya Komplek ruko Kapasa Raya No. 7 Depan SMUN 6 Daya – Makassar Rt/Rw C-05 Kel Bira Kec Tamalanrea Kota Kota Makassar – Sulsel Phone : 041 1 -47 20547, 47 20057 Hp : 0822-9383-7288

https://www.besttruckmanuals.com/