COUCHCADE PAC-E-20640 Wireless Gaming Owner’s Manual
- June 10, 2024
- COUCHCADE
Table of Contents
PAC-E-20640 Wireless Gaming
Owner’s Manual
PAC-E-20640 Wireless Gaming
INCLUDES:
- Wireless Control Deck
- Game Console
- HDMI Cable
- Micro USB Power Cable
WARNING
To ensure safe operation of the product, be sure to read this Owners Manual
before use. Keep this Owners Manual in a safe place for easy reference when
needed.
AGES 14+
CONTROL DECK SET UP
- Install 4”AAA” batteries (Not Included) in the battery compartinent on the side of the Control Deck.
BATTERY INSTALLATION
- MAKE SURE CONTROL DECK IS TURNED OFF OR IN AUTO OFF MODE
- REMOVE BATTERY BOX COVER BY PHILLIPS HEAD SCREWDRIVER
- INSERT 4 AAA ALKALINE BATTERIES IN THE BATTERY BOX AS ILLUSTRATED MAKING CERTAIN THAT NEGATIVE (-) AND POSITIVE (+) POLES ARE POSITIONED PROPERLY
- REPLACE BATTERY BOX COVER – BE SURE NOT TO OVER-TIGHTEN THE SCREW
WARNING – BATTERY-OPERATED
BATTERY SAFETY NOTICE
- Non-rechargeable batteries are not to be recharged.
- Rechargeable batteries are to be removed from the device before being charged (if removable).
- Rechargeable batteries are only to be charged under adult supervision.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
- Only batteries of the same or equivalent types, as recommended are to be used.
- Batteries are to be inserted with the correct polarity (+ and -).
- Remove batteries before storing.
- Exhausted batteries are to be removed from the device.
- Always use alkaline batteries.
- Do not dispose of batteries in fire, batteries may explode or leak.
- The supply terminals are not to be short-circuited.
CONNECTING GAME CONSOLE TO TV
- Connect HDMI cable (Included) to TV and Game Console (make sure the devices are OFF).
- Connect Micro USB cable (Included) to TV or USB power adaptor (not included).
- Press Power Button on top of Game Console to power ON. The power indicator light on top of Game Console will light up RED and then TV will enter the game. NOTE: Make sure your TV is on the correct HDMI auxiliary input and set with 16:9 scale.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation of the device.
FCC/ISED STATEMENT
This device complies with part 15 of the FCC rules/ Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC/ISED rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio /TV technician for help.
EPILEPSY WARNING
A very small percentage of individuals may experience epileptic seizures or
blackouts when exposed to certain light patterns or flashing lights. Exposure
to certain patterns or backgrounds on a television screen or when playing
video games may trigger epileptic seizures or blackouts in these individuals.
To reduce the risk of such a seizure incident, it is recommended to take a
10-15 minute break at each hour of playing.
PAIRING YOUR CONTROL DECK TO GAME CONSOLE
- Turn ON the power switch on the Control Deck.
- Press Power Button on top of Game Console to power ON. The power indicator light on top of Game Console will light up RED and then TV will enter the game. NOTE: Make sure your TV is on the correct HDMI auxiliary input and set with 16:9 scale.
- The LED of Control Deck will change BLINKING to SOLID when paired.
- If the units fail to pair, turn them both OFF and repeat Step 1-3 again or refer below “Pairing Mode”.
LED LIGHT INDICATION
| Game Console| Control Deck
---|---|---
Solid Light Up| Power On| Power On + Paired
Slow Flashing| x| Waiting Connection Mode
Fast Flashing| x| Pairing Mode
Light Off| Power Off| Sleep Mode / Power Off
Pairing Mode: If Game Console & Control Deck cannot be paired, please
hold Player 1 & 2 buttons at the same time then turn ON the power switch of
Control Deck. Once connected successfully, indicator light will light up SOLID
RED.
Sleep Mode:
Control Deck goes to Sleep mode after 10 minutes of inactivity. (press any
button to wake up the Control Deck).
ASSISTANCE OR SERVICE
If you have questions regarding your Arcadel Up product or require
technical support, contact Arcadel Up Customer Service at
www.Arcade1Up.com and click on “Support”.
CAUTION
Servicing instructions are for use by qualified service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do
so.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
GAME CONTROLS
*ARCADE MAY TAKE 10-15 SECONDS TO POWER ON AFTER SWITCHING ON
- MOVE JOYSTICK TO SCROLL THROUGH GAME LIST
- PRESS A BUTTON TO CHOOSE GAME
- FOLLOW GAME CONTROLS BELOW FOR EACH GAME
- HOLD PLAYER 1 (5 SECONDS) TO RETURN TO MENU AND TO SAVE A HIGH SCORE
- HOLD PLAYER 2 (5 SECONDS) TO RESET GAME
| 
---|---
FCC RF RADIATION EXPOS URE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and any part of your body.
ISED RF RADIATION EXPOSURE STATEMENT:
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20cm between the radiator and any part of
your body.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | SOLUTION |
|---|---|---|
| Game Console will not turn on. | -Game Console is not turned ON. |
-Game Console is not plugged in via the Micro USB cable (Included).
-Game Console HDMI is not connected to TV or on correct TV input source.| -Press button on top of Game Console to turn ON.
-Make sure the Game Console is plugged into a 5V power supply via the Micro USB cable (Included).
-Make sure the HDMI cable is connected to your N and make sure your TV is on the correct input source.
Control Deck will not turn on.| -No batteries in battery compartment on
Control Deck.
-Batteries are out of power.
-ON/OFF Switch is in the OFF position.
-Batteries are to be inserted with the incorrect polarity.| -Replace to new batteries.
-Slide ON/OFF Switch located on Control Deck to the ON position.
-Make sure batteries are to be inserted with the correct polarity.
Game will turn ON, but there is no sound.| -Volume Switch is in the OFF
position.| -Slide Volume Switch located on Control Deck to the the right.
NOTE: slide volume switch up to increase volume, down to lower volume.
The game screen is frozen.| -The game encountered a problem when processing
the data.| -You may need to RESET the game. Turn the ON/OFF switch to the OFF
position and then back ON again on both the Game Console and Control Deck.
One of the buttons on the Control Deck is stuck in the down position.| -Debris
may have gotten between the button and the button housing.| -Take something
thin (like a business card) and place between the button and the button
housing and slide it back and forth to loosen the debris.
You are not able to scroll through the games on the game selection menu.| -You
may be pressing the incorrect buttons to scroll through the games.| -Look at
the game control section in the instruction manual to make sure you are
pressing the correct buttons to scroll through the game selection menu.
You are able to scroll through the games on the game selection menu, but you
can’t enter a game to begin playing.| – You may be pressing the wrong button
to enter the game.| -Look at the game control section in the instruction
manual to make sure you are pressing the correct button to enter the game.
You have entered the game, but you can’t get the game to start.| -You may be
pressing the wrong button to start the game.| -Look at the game control
section in the instruction manual to make sure you are pressing the correct
button to start the game.
You have entered the game, but you can’t exit the game to get back to game
selection menu.| -You may be pressing the wrong button to exit the game.
-You may not be holding down the exit button long enough.| -Look at the game control section in the instruction manual to make sure you are pressing the correct button to exit the game.
-Make sure you are holding the exit button down for 5 seconds to exit the game.
The control functions that are printed on the Control Deck do not match the
gameplay on the screen for the game you are playing.| -You may be pressing the
wrong game conrol buttons for the game you are layng. playing.| -Look at the
game control section in the instruction manual to make sure you are pressing
the correct game control buttons for that game.
-Look at the game control loading screen on the monitor to make sure you are pressing the correct control buttons.
( NOTE: The game controls that are printed on the Control Deck are only
for the feature cabinet game. The other games in the cabinet will utilize the
same buttons but react differently.)
The game will not let me select 2 or 3 players for a chosen game.| -The game
may only be a 1 or 2 player game.| -Refer to the game control section in the
instruction manual to see how many players are able to play that game.
COLLECT THEM ALL
Colors, style and decoration may vary. 
visit Arcade1up.com
TO SIGN UP FOR OUR MAILING LIST AND SEE A COMPLETE LIST OF GAMES
VISIT US AT ARCADE1UP.COM
PAC-MAN™8&©1980 BANDA! NAMCO Entertainment Inc.
PAC-MANIA™&1987 BANDAI NAMCO Entertainment Inc.
GALAGA™&©1981 BANDAI NAMCO Entertainment Inc.
GALAGA™88&©1987 BANDAI NAMCO Entertainment Inc.
GALAXIAN™&©1979 BANDAI NAMCO Entertainment Inc.
DIG DUG™&©1982 BANDA! NAMCO Entertainment Inc.
DIG DUG™I1&©1985 BANDA! NAMCO Entertainment Inc.
M A P F Y ™ 861983 BANDAI NAMCO Entertainment Inc.
NEW RALLY-X™&©1981 BANDA! NAMCO Entertainment Inc.
ROLLING THUNDER™& ©1986 BANDA| NAMCO Entertainment Inc.
TASTEMAKERS, LLC.
347 Fifth Avenue, Suite 1402-199, New York, NY 10016
MADE IN CHINA
REV 11.10.21
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>