TOYOTA PVM Panoramic View Monitor Owner’s Manual
- June 10, 2024
- Toyota
Table of Contents
TOYOTA PVM Panoramic View Monitor Owner’s Manual
Statements & Declarations
Safety Instructions
Warning
Read, follow, and retain all of the following safety precautions. Heed all
warnings before operating the Panoramic View Monitor.
Cautions
-
Several precautions are to be taken whle using the PVM:
a. PVM function automatically disables when vehicle speed exceeds 12 km/h.
b. Using the PVM mode does not alter the responsibilities of the the traffic rules and regulations to avoid accidents to prevent accidents, personal injuries or property damages. -
Blind Spot
The cameras that are mounted at the Front, Right, Left and Rear of the vehicle are only able to view objects from a proximate distance distance of 20cm away from the vehicle.
LEGEND
| Blind spot area
| Visible area
Getting Started
Product Overview
Figure 2.1
- Front Camera Fortuner 2.4 8 2.7
- Front camera located at Front Grille (Fortuner 2.4 & 2.7 variant only)
- Front Camera Fortuner 2.8
- Front camera located at Front Grille (Fortuner 2.8 variant only)
- Right and Left Camera Fortuner
- Right / Left Camera located under the respective side mirrors
- Rear Camera Fortuner
- Rear camera located under the trunk
Operating PVM
Gear : Engaged to Parking (P) / Neutral (N) / Drive (D)
-
Press the PVM icon located on the right side of the head unit home screen to activate its function.
-
User can view vehicle surroundings from 8 different perspective as follows:
-
2D model + 3D model 360
-
2D model + 3D model (from angle A).
-
Front View Full Screen.
-
2D model + 3D model (from angle B).
-
2D model + 3D model (from angle D).
-
2D model + 3D model (from angle F).
-
2D model + 3D model (from angle H).
-
Rear View Full Screen.
-
Press the “Home” button located on the Head Display Unit to exit PVM mode manually.
2D model + 3D model 360° view
Swiping the finger across the screen as shown below allows user to rotate the
view around the vehicle.
2D model + 3D model from angle A
To activate this view, tap on the icon on screen.
Front View Full Screen
To activate this view, tap on the icon on screen.
2D model + 3D model from angle B
To activate this view, tap on the icon on screen.
2D model + 3D model from angle D
2D model + 3D model from angle F
To activate this view, tap on the icon on screen.
2D model + 3D model from angle H
To activate this view, tap on the icon on screen.
Rear View Full Screen
To activate this view, tap on the icon on screen.
Gear : Reverse (R)
When gear is engaged to Reverse (R), the screen on Head Display Unit will
switch to PVM mode automatically.
Color Selection
To change color of vehicle model to a more preferred color, tap the icon.
Please read this manual for proper operation and keep it for future reference.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>