TOYOTA A+C USB Fast Charger Owner’s Manual
- June 10, 2024
- Toyota
Table of Contents
USB Fast Charger (A+C) OWNERS MANUAL
Please read this manual for proper operation and keep it for future reference.
Safety Instruction
The product must only be used for its intended purpose and in accordance with
these instructions. All other use is considered to be unsuitable.
The manufacturer cannot accept liability for personal injury or material
damage resulting from improper use of the product.
Observe the following precautions. Failure to do so may result in the
possibility of fire, equipment failure or damage, or burns due to heat.
- Do not expose the charger to moisture and liquid.
- Do not used for data transfer since it is only for battery charging purposes.
- Do not used with over-power device such as laptop and others USB device beside smartphone and tablet.
- Do not disassemble, modify or remove the USB Charger.
- Do not use the USB charger if it has been damaged.
Product Description
A portable device, such as a smartphone or tablet, can be charged by plugin
USB cable at the designated port.
To achieve Fast Charge mode, the portable device must be compatible with Fast
Charge protocol and Fast Charge cable. Charging time is varies depending on
smartphone/tablet battery capacity and Fast Charge protocol.
| Input Voltage | DC9V-16V |
|---|---|
| Port A | Output |
| Port C | Output |
| Led Indicator | Green : Idle/ Complete charging |
Red : Charging
Protection| Short Circuit
Over Temperature
Over Load
Protocol| DCP,QC2.0,QC3.0,FCP,SCP,AFC,MTK PE,SFCP,PD2.0,PD3.0 (PPS)
Table2.0: Specification
User Instruction
i- The USB Charger will turn ON when the user start the vehicle engine.
The LED indicator will turn Green meaning it is in standby mode.
ii- Connect USB cable to USB charger port and the other end of USB cable
connect with portable device.
iii- The LED indicator light will change to RED once the charging begins.
After the charging is complete, the RED light will change to Green.
iv- For supporting smartphone, the screen will display “Fast Charging/Quick
Charging”.
| Scenario Operation | LED Indicator |
|---|---|
| Incase of push start button. | RED |
| 1st Push start (ACC) | Charging |
| 2nd Push Start (IG) | Charging |
| After Brake + 1 push start (Engine ON) | Charging |
| Engine OFF | No Light |
(Cannot Charger)
Table 3.0: Operational Indicator
Precaution
-
Do not spill liquids (i. e. water, drinks, etc.) on the USB Charger.
-
Misuse or excessive force may cause product damage.
-
While charging, the USB charger and the portable device will become warm.
This is not a malfunction. If a portable device becomes warm while charging and charging stops due to the protection function of the portable device, wait until the portable device cools down and charge it again. -
Different type of Battery capacity will affect on the charging performant.
-
Please be awarded for chargeable while during engine off , it’s effected to
Battery life time will be empty
Notice
- Charging will be suspended when vehicle engine is OFF. Charging will resume after engine ON.
- In the following situations, the USB charger may not operate correctly:
– When a portable device is not centered on the charging area
– When a portable device becomes hot while charging
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>