brillcam Changing the P2P ID Instructions
- June 10, 2024
- brillcam
Table of Contents
brillcam Changing the P2P ID
Product Information
Product Name: [Log] Camera
Manufacturer: Brillcam Inc.
Copyright : 2020-2021
Description: The [Log] Camera is a surveillance camera that allows remote
monitoring through P2P cloud technology.
Features
- High Definition video quality
- P2P cloud technology for remote monitoring
- Easy installation and setup
- QR Code scanning for seamless connection
Product Usage Instructions: How to Change P2P ID
- Connect the camera to the computer using a wired cable.
- Download and install the device manager tool on the computer from this link: https://drive.google.com/file/d/1mRiv6Pu2XjsKqKljXoitdn_x9lzbXh2b/view
- It is recommended to change the camera’s IP segment to be the same as the computer’s IP segment.
- Download and run the SQBurner_v500 tool from this link: https://drive.google.com/file/d/1QMDv1swYAQc1xdRmIM6kb0aBfeX23vr/view?usp=sharing
- Install and run the device manager tool. The camera should be automatically searched in the tool and its IP address can be listed in the tool.
- Run the SQBruner_EN.exe tool.
- Fill out the camera’s IP address, credential user name (default is admin), and password (default is 12345).
- Fill out the P2P ID which should be requested from the manufacturer.
- Only check the QR Code (Goodlink) and uncheck other options.
- Click Start to burn the new P2P ID.
- If the process is successful, there will be a message. The camera needs to be rebooted after burning.
- Use the new P2P ID to access the camera remotely through mobile devices.
Thank you for your interesting in our products.
[Log] How to change the P2P ID?
Please prepare the following things before burning the new P2P ID:
- Please be sure that the camera has been connect to the computer by wired cable;
- Please download and install the device manager tool on the computer.
- It’s suggested to change the camera’s IP segment to be the same as the computer’s;
- Please download and run the SQBurner_v500 tool;
The connection example diagram
Please install and run the device manager tool as below:
The camera should be automatically searched in the tool and its IP address can be listed in the tool.
The download address of DeviceManager:
https://drive.google.com/file/d/1mRiv6Pu2XjsKqKljXoitdn_x9lzbXh2b/view
So next please run the SQBruner_EN.exe tool as below:
The
download address of SQBruner:
https://drive.google.com/file/d/1QMDv1swYAQc1xdRmIM6-kb0aBfeX23vr/view?usp=sharing
And then please start to burn the new ID as below steps.
- Please fill out the camera’s IP address which can be searched in above device manager tool;
- Please fill out the camera’s credential user name, the default is “admin”;
- Please fill out the camera’s credential password, the default is “12345”;
- Please fill out the P2P ID which should requested to us.
- Only check the “QR Code (Goodlink)”, uncheck others.
- Click “Start to burn”, and there is message if it’s successfully burned.
Please be noted that the camera needs to be reboot after burning.
And now please use the new ID in your mobile.
Brillcam Inc. Copyright 2020-2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>