Amazon C4A6T4 Reading and Writing Device User Manual

Amazon C4A6T4 Reading and Writing Device

Product Information

Model Number: C4A6T4

Description: Model C4A6T4 is a digital media device that serves as a single device for all the reading and writing needs.

Supplied Accessories

• Basic Pen C8S7TN
• Premium Pen C8S8TN
• USB cable

Product Usage Instructions

Quick Start Guide

1. Activating Your Device
2. Power: Long press the power button to power on your device.
3. Setup: Follow the on-screen instruction to get started. For more information, visit the user guide located in your device setting.
4. Tip Replacement
5. Remove the old tip using the included clamp tool.
6. Insert the replacement tip into the opening until it’s seated.

Safety and Compliance Information

Using Your Device Around Other Electronic Devices:

The device uses and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals. There are some places where RF signals could constitute a hazard, such as health care facilities and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

The party responsible for FCC compliance is Amazon.com Services LLC 410 Terry Ave North, Seattle, WA 98109 USA If you wish to contact Amazon visit www.amazon.com/devicesupport, select United States, click Help & Troubleshooting, then scroll to the bottom of the page and under the Talk to an Associate option, click on Contact Us.

Information Regarding Exposure to Radio Frequency Energy

The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Device in such a manner that minimizes the potential for human contact during normal operations. Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition. fcc.gov/oet/ea/fccid. It is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized.

**IC Compliance Information Radio Frequency

**

Information

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Product information

Introduction

• Model C4A6T4 is a digital media device, which is a single device for all the reading and writing needs.
• Supplied Accessories: Basic Pen C8S7TN, Premium Pen C8S8TN, USB cable.

Quick Start Guide

1. Power: Long press the power button to power on your device.
2. Setup: Follow the on-screen instruction to get started. For more information, visit the user guide located in your device setting.

How to replace the Tips

1. Remove the old tip using the included clamp tool.
2. Insert the replacement tip into the opening until it’s seated.

Safety and Compliance Information, Using your device Around Other Electronic Devices

The device uses and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals. There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.

Other Safety information

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
Do not expose your device or adapter to liquids. If your device or adapter gets wet, carefully unplug all cables without getting your hands wet and wait for the device and adapter to dry completely before plugging them in again. Do not attempt to dry your device or adapter with an external heat source, such as a microwave oven or a hair dryer. If the device or adapter appear damaged, discontinue use immediately. Use only accessories supplied with the device to power your device. To avoid risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid. The party responsible for FCC compliance is Amazon.com Services LLC 410 Terry Ave North, Seattle, WA 98109 USA If you wish to contact Amazon visit www.amazon.com/devicesupport, select United States, click Help & Troubleshooting, then scroll to the bottom of the page and under the Talk to an Associate option, click on Contact Us.

Information Regarding Exposure to Radio Frequency Energy

The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the FCC. Nevertheless, it is advised to use the Device in such a manner that minimizes the potential for human contact during normal operations. Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition. fcc.gov/oet/ea/fccid. It is advised to use the wireless equipment in such a manner that the potential for human contact during normal operation is minimized.

**IC Compliance Information

**

Radio Frequency Information

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure.

Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.

This device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Information Regarding Exposure to Radio Frequency Energy

This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment.

CAN ICES-3(B)/NMB-3(B)

Product Specifications

• Model Number: C4A6T4
• Electrical Rating: 5.2V⎓ 3A
• Temperature Rating: 32°F to 95°F (0°C to 35°C)

Recycling Your Device Properly

• In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of, or recycle, your device in accordance with your local laws and regulations. For information about recycling your device, go to www.amazon.com/devicesupport

Additional Safety and Compliance Information

For additional safety, compliance, recycling, and other important information regarding your device, please refer to the Legal section in the Home drop-down menu on your device or visit www.amazon.com/devicesupport.

References

• . Spend less. Smile more.
• Amazon Digital Services and Device Support - Amazon Customer Service

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>