CATEC DJ-D182 Wind and Illumination Sterilizing System User Guide
- June 10, 2024
- CATEC
Table of Contents
Wind & Illumination Sterilizing system
DJ-D182 V2.1 version
Operational Guideline
DJ-D182 Wind and Illumination Sterilizing System
Notice:
- Don’t switch on the power supply before installation completed!
- Only the professional electricians are allowed to install or maintain the equipment!
- Reliable grounding is required for safety issue!
- Air blower current:<2A
- Illumination current:<2A
- Sterilizing current:<2A
Inspection before application:
Touch screen ————– 1
Control panel ———– 1
Transformer ———— 1
Touch Screen
1.1 You will enter the interface with“LOGIN” button
1.2 Main interface![CATEC DJ D182 Wind and Illumination Sterilizing System
- Main interface](https://manuals.plus/wp-content/uploads/2023/04/CATEC- DJ-D182-Wind-and-Illumination-Sterilizing-System-Main-interface.png)
Functions
2.1 Blower switch: to switch on or off the blower 2.2 Wind SPEED:
I~III,total 3 levels,last choice will be saved. 2.3 Illumination switch:
to switch on or off the light for illumination 2.4 Sterilizing switch: to
switch on or off the sterilizing light
2.5 Countdown rate of the filter life: resolution ratio based on the
setting hours, for example 16000hrs totally, 20% means 3200hrs left. The left
red sign will light up for alarming when the filter life ends. 2.6 Resetting
for filter life
Press the button of on the main interface,and input password:3457,then
press “Enter”to the resetting interface.
When enter the interface for life resetting, press“-”or“+”for resetting within the range of 1000~16000 (H). After resetting, press “BACK” to save your data and return to the main interface.
Warm reminding:
The filter working life will be based on the blower working hours.
Wiring diagram
3,1 fixing of the touch Screen
Housing size WH=87.7130mm, safety depth>70mm, thickness of the housing
frame D<3.5mm
Option 1: embed the screen into the housing frame and have it fixed with the 4
screws from back side. Option 2: embed the screen
into the housing frame and have it fixed with glass cement or other non-
corrosive glue.
3.2 Sizes of the switching power
Add: 1331 183RD STREET #1054, CARRITOS, CA 90703, USA
URL:
https://www.toolots.com/marketplace/seller/profile/catec695
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>