Amazon GA5Z9L Fire TV Cube Handsfree Streaming Device User Manual
- June 10, 2024
- Amazon
Table of Contents
User – Manual
Product Information
Product Specifications
Model Number: GA5Z9L
Electrical Rating: 12V VDC; 1.24 A
Operating temperature: 0°C to 35°C
Connectivity: Tri Band Wi-Fi (2.4 GHz / 5 GHz / 6E); 802.11 a/b/g/n/ac/ax; BT
BDR/EDR, BLE.
Quick Start Information
Included In-Box:
– Device
– Remote
– Power Adapter
– AAA Batteries
Activate Device:
Step 1: Connect the included power adapter to the device and plug into the
power outlet.
Step 2: Use a HDMI Cable (not – included) to connect the HDMI Out port on the
device to the HDMI Port of the TV.
Step 3: Turn on your TV then select the input on your TV that matches the name
of the HDMI port you connected the device to.
Connecting Device to Network:
Step 1: When the HDMI Input for the device is selected on the TV, select the
automatic prompts till the screen requests the user to connect to wifi.
Step 2: Select your network from the list of displayed SSID Step 3: If
required, input password
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device, uses, and can radiate radio frequency (RF) energy and, if not used
in accordance with its instructions, may cause interference to radio
communications and electronic equipment. External RF signals may affect
improperly installed or inadequately shielded electronic operating systems,
entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals,
if in doubt, check with the manufacturer. For personal medical devices (such
as pacemakers and hearing aids), consult with your physician or the
manufacturer to determine if they are adequately shielded from external RF
signals.
There are some places where RF signals could constitute a hazard, such as
health care facilities, and construction sites. If you are not sure, look
around for signs indicating that two-way radios or mobile phones should be
turned off.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party
responsible for compliance could make the device no longer comply with the FCC
Rules.
Information on your device is on file with the FCC and can be found by
inputting your device’s FCC ID, which can be found on the back of Device, into
the FCC ID Search form available at
transition.fcc.gov/oet/ea/fccid.
This device should be installed and operated with at least 20 cm between the
radiator and your body.
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device could automatically discontinue transmission in case of absence of
information to transmit, or operational failure. Note that this is not
intended to prohibit transmission of control or signaling information or the
use of repetitive codes where required by the technology.
This device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an
uncontrolled environment.
CAN ICES-3(B)/NMB-3(B)
This device should be installed and operated with at least 20 cm between the
radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>