BRAND X18 BT Portable Speaker User Guide

June 9, 2024
BRAND

BRAND X18 BT Portable Speaker

BRAND-X18-BT-Portable-Speaker-PRODUCT

Product Information

The A6 speaker measures 105*148 mm and is equipped with stereo sound. It comes with wireless version 5.1 and TWS for a seamless stereo effect. The speaker also supports USB-disk, TF card, FM Radio, Aux-in, and wireless connectivity options. It has a built-in lithium rechargeable battery with a capacity of 3000mAh and a stable and easy-to-carry strap. Additionally, it features a wired microphone support for karaoke and an RGB running light. The speaker also comes with a Type-C charging port.

PRODUCT Features

  1. IPX6 Portable Speaker with Stereo Sound;
  2. Wireless version 5.1, with TWS, same enjoy the stereo  effect;
  3. USB-disk, TF card, FM Radio, Aux-in, Wireless etc;
  4. Wired microphone support, karaoke anywhere;
  5. With RGB running light;
  6. With Type-C charging port;
  7. Built-in lithium rechargeable battery 3000mAh;
  8. Stable and easy to carry straps.

PRODUCT Accessories

  • Charge cable
  • User manual

Product Usage Instructions

Before using the A6 speaker, please read the manual carefully. The manual contains information for correct operation of the speaker. Any content revision of the manual won’t declare again, and we are no responsible for consequence caused by fault or oversight of this manual.

PRODUCT Specification

  • Wireless version: 5.1, Support A2DP and AVRCP profile.
  • Wireless range: up to 10 meters(without obstacles)
  • Speaker: Horn Size: 3 inch2; power: 20W2.
  • USB; Aux-in 3.5 mm jack.
  • OFF/ON supply: Built-in rechargeable lithium battery 3000mAh(3.7V) (4 hours play with max volume and RGB light).
  • Recharge OFF/O N: DC 5V 1A (Type-C charging cable included).
  • Product siz e: 369136188MM
  • Frequency response100HZ -12KHZ

Twins (TWS) Function

  1. Turn on the two identical speakers you want to be paired. Please note they must be the same BT pairing name, both under Wireless mode. (Only need to set up one of the two speakers.)
  2. Short press the TWS button for around 2 seconds once. Once indicates that two speakers are going to connect. Twice indicates that two speakers have been connected.
  3. Under TWS playing mode, short press the TWS button for around 2 seconds once. Once indicates that two speakers are going to disconnect. Twice indicates that the two speakers have been disconnected.
  4. Using Audio Cable or an external device’s wireless to connect one of two speakers that are already wirelessly paired, then music plays, one is in the left channel while the rest one in the right channel.
  5. Short press Play/Pause button on the devices or on Mobile phones to play/stop the music.

Remark: Under Wireless playing mode, insert USB/TF Card will disconnect the wireless and switch the playing from USB/TF Card. You can press the M button to switch to Wireless mode again.BRAND-X18-BT-Portable-Speaker-
FIG-1

Instruction for Appearance and Key

  1. Backward (Long press)/ Volume down (Short press)
  2. Power On/OFF (long/short press)
  3. RGB Light button
  4. TWS
  5. Mode (Switch Wireless, USB, FM and TF)
  6. Play/Pause
  7. Forward (Long press)/ Volume up (Short press)
  8. Wired Mic Input
  9. USB Port
  10. Aux-in Jack
  11. TF Card Port
  12. Charging Port

RGB Light

  1. Short press RGB Light button to switch the modes of light with different colors, cycle switch modes.
  2. Under FM mode, RGB Light button cannot be used.

USB/TF Card

  1. Long press Power button to power on, the RGB light on and di twice.
  2. Insert USB flash disk/TF Card into slot, the music stored will be played automatically.
  3. Long press + or – button to select songs you like, short press + or – button to adjust volume up and down.
  4. Short press Play/Pause button to play or pause.
  5. Short press Power button to power off, while without use.

Remarks:

  1. Short press the M button to switch the different modes, the order is Wireless, USB, FM radio and AUX-IN.
  2. Turn OFF/ON button to OFF to cut off the OFF/ON supply while without use.

For correctly opera , please read this manual carefully before using. Any content revise of the manual won’t declare again, and we are no responsible for consequence caused by fault or oversight of this manual.

FEATURES

  1. 1PX6 Portable Speaker with Stereo Sound;
  2. Wireless version 5.1,with TWS function,connection to 2 same speakers at the  same time, enjoy the stereo effect;
  3. USB-disk,TF card,FM Radio,Aux-in, Wireless ect multiple working modes;
  4. Wired microphone support, karaoke anywhere
  5. With RGB running light;
  6. With Type-C charging port;
  7. Built-in Iithium rechargeable batery 3000mAh;
  8. Stable and easy to carry straps.

FM Radio Function

  1. Long press “Power buton ” to power on, short press the “M” buton to switch to FM radio state.
  2. Under playing mode, long press “Play/Pause” buton to auto search the FM  Channel and store it automati ally.
  3. Long press “” or “” buton to change the stored FM channel.
  4. Short press “” or “” buton to adjust volume up and down.
  5. Under FM mode,RGB light will off.

Wireless Function

  1. Long press “Power buton ” to power on, the RGB light on and “di” twice.
  2. Acti ate Wireless of mobile phone and search for device name “X18” then connect it, “di” three times connected successful.
  3. Long press “” or “”buton on the devices or on Mobile phones to select songs you like.
  4. Short press “” or “” buton to adjust volume up and down. Or adjust the mobile phones’ volume.

AUX-IN Function:

  1. For other compatible music devices or your MP3/MP4 players, use the supplied Audio Cable to connect from the device’s “Line Out” to the “Aux In” of this devices. Then press the “M” buton to switch to AUX-IN state.
  2. When using an extermal device, all functions will be controlled by the external devise except the “Play/Pause” buton, “” or”” buton .
  3. Short press “” or “” buton to adjust volume up and down. Or adjust the mobile phones’ volume.
  4. Short press “Play/Pause” buton on the devices or on Mobile phones to play/stop the music

How to charge

  1. The charger is not included in the accessories. Please use the Universal 5V/1A charger to charge this device, and we are no responsible for any damage caused by using other charger.
  2. Power off the unit, put the provided charge cable into the charge slot of unit, connect the other end to PC or other charger with DC 5V output (Not included),the red charging indicator keep lighting.(When playing music during charging, please put the volume to middle, because for some music with heavy bass, the charger may not be able to afford the high current temporarily under the maximum volume)
  3. Charge time should be about 2.5 hours. (When charging full, the indicator light will switch OFF)
  4. In order to prolong the life of batery, please do not charge more than 8 hours.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontroled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals