WEVER DUCR Light Control App User Guide

WEVER DUCR Light Control App

Product Information

The Light Control App allows you to control your lamps through your smartphone or tablet. To use the app, you will need to connect your lamps to your network and install the app on your device. The app will scan and detect your lamps, allowing you to control them remotely.

Product Usage Instructions

1. Connect your lamps to your network by following the instructions provided with your lamp.
2. Install the Light Control App from weverducre.com/lightcontrolapp on your smartphone or tablet.
3. Open the app and enter your network name when prompted.
4. The app will scan and detect your lamps. Once detected, you can control your lamps from your device.

INSTALLATION

1. Turn off your STREX system, put that wireless control device into your track and switch the STREX system back on

2. Download the Light Control App from the App Store download and install it. Allow them Bluetooth control on your mobile device.

3. Open the Light Control app and select Add Network”. Click on ‘Fixture’. to enter your network name.

4. You can now enter your network name.
   If you want to set a password, must Check the “Disable password” box remove and then enter your password above.

5. You can now switch all lights on and off at the same time switch off or dim. To different groups to create that can be individually dimmed, click on “Fixture”.

6. The app will now scan your lamps.

7. Once the scanning is complete, you can You create different groups and these groups Assign lamps. To create a new group, click Add Group.

8. You can now name the created Enter group and see below one List of all previously scanned lamps.

9. Add by activating the specific lamps add them to the group. Activated lamps are shown in green. You can click that
   Tap the lightbulb icon to turn on the lightbulb in your to identify the installation.

10. You can now use each group independently dim and control each other.

11. Your network will appear with a green tick on it the app’s home screen as soon as it is ready for use.

weverducre.com/lightcontrolapp

Spinnerijstraat 99/21 | 8500 Kortrijk – Belgium
[email protected]
weverducre.com

References

• Design Lighting from Belgium with Love | Wever & Ducré
• Design Lighting from Belgium with Love | Wever & Ducré

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>