WEVER DUCR EC2A Wever 1.0 LED Light Instructions
- June 16, 2024
- WEVER DUCR
Table of Contents
GENERAL SAFETY AND MOUNTING CONDITIONS
GENERAL CONDITIONS FOR USE
-
The appliance should be installed, connected and tested by a certified installer, and in accordance with the local regulations.
-
The customer is supposed to know the Wever & Ducré general sales conditions.
-
Luminaires should always be installed or replaced with care.
-
The wattage or current mentioned on the appliance cannot be exceeded.
-
Turn off the main power supply before installation or maintenance of the appliance.
-
When the light source is to be replaced: switch off the appliance first and let it cool down completely.
-
Clean the appliance with a soft cloth and a standard pH neutral detergent. Stainless steel surfaces should be maintained regularly.
Therefore the appliance should be switched off and cooled down. -
Misuse of, or changes to the appliance shall nullify the guarantee.
-
Keep children away from the appliance as the appliance‘s contact surface can become hot.
-
The power cord must always be kept out of the reach of children.
-
The appliance cannot be covered with e.g. insulating material unless stated otherwise.
The manufacturer is free to change the design, specifications and instructions for assembly.
SEE SEPARATE INSTALLATION INSTRUCTIONS
WEVER & DUCRÉ BV | Spinnerijstraat 99/21, 8500 Kortrijk, Belgium |
weverducre.com
Importer United Kingdom: XAL Ltd. | 23 Batemans Row, EC2A 3HH London, United
Kingdom | weverducre.com