TRIO 679114232 OKINAWA LED Ceiling Light Instruction Manual

June 9, 2024
Trio

TRIO 679114232 OKINAWA LED Ceiling Light

TRIO-679114232-OKINAWA-LED-Ceiling-Light-PRODUCT

This product contains light source(s) of energy efficiency class(es) F

WARNING

Before assembling, please read carefully the safety instructions!

INSTALLATION INSTRUCTIONS

TRIO-679114232-OKINAWA-LED-Ceiling-Light-FIG-1

SYMBOLS

TRIO-679114232-OKINAWA-LED-Ceiling-Light-FIG-2

REMOTE USING

TRIO-679114232-OKINAWA-LED-Ceiling-Light-FIG-5

Description

Description of how the light works without the remote control unit

If the light is switched on via the main switch/ wall switch, the unit provides the lighting scenario which was last set using the remote control unit (memory effect).

Attention:  if the light was last switched off using the remote control unit, it cannot be switched on again via the wall switch due to the memory effect.

Description of how the light works with the remote control unit

  • The enclosed remote control unit can be used universally for all lights of this type.
  • This also means that several lights can be controlled with the same remote control unit.
  • The synchronous Controlling of several lights is not intended.

Operation of the remote control

TRIO-679114232-OKINAWA-LED-Ceiling-Light-FIG-4

  • 1. ON/OFF: The light is switched on/off completely.
    • After being switched on again it adjusts to 100% brightness. All previous settings are reset.
  • 2. Night light: The night light is switched on. The main light slowly fades if it was switched on previously.
  • 3 &4. Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.
    • Attention:  If a mixed shade has been set via buttons 5 and/or 6, this setting may be lost when adjusting the brightness.
  • 5 &6. White: Colour setting- cold white
    • Warm: Colour setting- warm white
    • The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the wärmest or coldest colour setting being reached.
  • 7. Mode: Cyclical modes switch
    • Here, the ‘100% brightness – off- night light’ functions are interconnected and run in sequence.

TRIO International GmbH

Developed in Germany by Made in PRC

WEEE-Reg. Nr: DE78273666

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Trio User Manuals

Related Manuals