GAGGENAU VG425211AU Vario Hob Gas Instructions

June 9, 2024
Gaggenau

gaggenau logo

GAGGENAU VG425211AU Vario Hob

GAGGENAU VG425211AU Vario Hob

  • VG425211AU
  • Vario gas cooktop 400 series
  • Stainless steel
  • Width 38 cm
  • Natural gas 10 mbar

Full electronic power level regulation on 12 levels Precise and reproducible flame size Automatic fast ignition, electronic flame monitoring with automatic re-ignition Simmer function for cooking on a very low output level Solid stainless steel control knob Precision crafting of 3 mm stainless steel For surface mounting with a visible edge or for flush mounting Can be combined perfectly with other Vario appliances of the 400 series

Cooking zones

1 two-ring high output burner (165 W – 3900 W), suitable for pots up to max. ø 28 cm. 1 two-ring standard output burner (165 W – 1800 W), suitable for pots up to max. ø 24 cm.

Handling

Control knobs with illuminated ring, cooking zone and output level markings.

One-handed operation

Full electronic control in 12 output levels for exact power level regulation plus simmer function Automatic fast ignition.

Features

  • Simmer function.
  • Cast iron pan support with flat,
  • continuous pot surface.
  • Brass burner rings.

Safety

Electronic flame monitoring with automatic re-ignition. Residual heat indication. Safety shut-off.

Planning notes

Depending on the type of installation (surface-mounted or flush-mounted, with or without an appliance cover), the specific location of the cut-out and the knob positions may vary. The drawing “Installation of the control knob” must be observed if the panel is more than 23 mm thick (there must be a recess at the rear). If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided. The bearing capacity and stability, in the case of thin worktops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads. Additional instructions for flush mounting: Installation is possible in worktops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the cut edges must be observed. Concerning other materials please consult the worktop manufacturer. The groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining. The joint width may vary due to size tolerances of the combinations and of the worktop cut-out.

Characteristics

  • Product name/family: Vario/Domino gas hob
  • Built-in / Free-standing: Built-in
  • Energy input: Gas
  • Total number of positions that can be used at the same time: 2
  • Required niche size for installation (HxWxD): 134 x 360 x 492
  • Width of the appliance: 380
  • Dimensions: 134 x 380 x 520
  • Dimensions of the packed product (HxWxD): 300 x 500 x 600
  • Net weight: 13.367
  • Gross weight: 15.4
  • Residual heat indicator: Separate
  • Location of control panel: External control
  • Basic surface material: brushed stainless steel
  • Color of surface: Stainless steel, Stainless steel
  • Color of frame: Stainless steel, Stainless steel
  • Approval certificates: Australia Standards, Australia Standards
  • Length electrical supply cord: 140
  • EAN code: 4242006262921
  • Electrical connection rating: 15
  • Gas connection rating: 5700
  • Fuse protection: 2
  • Voltage: 220-240
  • Frequency: 50; 60

Consumption and connection features

If installing several appliances in individual cut-outs allow for a division bar of minimum 50 mm between the individual cut-outs. Special nozzles (for LPG) can be ordered as spare parts. Plan for an electrical connection (the appliance is not operable without power supply). Air intake from above. No intermediate shelf required. Rear panel and wall trims must be heat-resistant and consist of a nonflammable material. A minimum clearance of at least 150 mm from adjacent heat-sensitive furniture or contact surfaces must be observed or thermal insulation fitted. If operated next to the downdraft ventilation VL 414, the air baffle AA 414 is recommended to ensure maximum performance of the cooktop. With a total connected load of more than 11 kW local regulations concerning room ventilation, room size and combination of extraction or recirculation hoods must be observed. Minimum clearance between gas cooktop(s) with more than 11 kW and ventilation hood 70 cm. Appliance can be snapped into the worktop from above. Appliance weight: approx. 13. kg

Connection

  • Total connected load gas 5.7 KW.
  • Total connected load electric 15.0 W.
  • Connecting cable 1.4 m with plug
  • VG425211AU
  • Vario gas cooktop 400 series
  • Stainless steel
  • Width 38 cm
  • Natural gas 10 mbar

INSTALLATION INSTRUCTION

GAGGENAU VG425211AU Vario Hob 1 GAGGENAU
VG425211AU Vario Hob 2 GAGGENAU VG425211AU Vario Hob
3 GAGGENAU VG425211AU Vario Hob 4 GAGGENAU
VG425211AU Vario Hob 5 GAGGENAU VG425211AU Vario Hob
6

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals