QUBINO Wireless Smart Home APP User Manual

: June 9, 2024
: QUBINO

QUBINO Wireless Smart Home APP

Luxy Smart Switch

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNKAD1| 868,4 MHz| 3830062071758| EU, China, Saudi Arabia, UAE, Kuwait, Lebanon, Israel

Luxy Smart Switch is the world’s first switch that gently illuminates in 16 million colours. It can be used standalone as a switch to turn on/off the light connected to it and as an ambient light for a gentle illumination of your home. Due to its connectivity, you can also use it as a smart home device and enjoy plenty of other functionalities it offers.

ADVANTAGES

The Luxy Smart Switch can be used to turn ON/OFF the main room light or other loads (water heater, IR panel, fan, etc.)
It can be used as an independent light source (e.g. a night light, an ambient light)
It can be controlled manually via 5 integrated touch-sensitive points on the surface
Luxy Smart Switch can be controlled with a smartphone app (via Z-Wave).
You can create time schedules and different scenarios to turn it ON/OFF
It has pre-programmed nature inspired lighting effects: Ocean, Sunrise, Rainbow and Nature
Supports Smart Start mode for a quick set-up
It has a natural glass frame that blends perfectly into your room
Security 2 Authenticated

TECHNICAL DATA

Power supply	110 – 240 Vac ±10 % 50/60 Hz
Rated load current of output (resistive load)*	1 x 10A
Operation temperature	-10 ~ +40 °C
Z-Wave operation range	up to 40 m indoors
Colours	16 million
Electricity consumption	<1 W
Installation in boxes	Ø ≥ 60 mm (2,36 in) / at least 2M
Z-Wave Repeater	Yes
Dimensions (WxHxD) / (with packaging)	93x90x45 mm/ 149x136x53 mm)
Weight (with glass frame) / (with packaging)	114 g / (230 g)

WIRING DIAGRAM

In case of loads other than resistive loads, please pay attention to the value of cos φ. If necessary, connect loads less powerful than what they are rated for –this applies to all motor loads. Max current for cos φ=0,4 is 3 A at 240 Vac.

PACKAGE CONTAINS

Luxy Smart Switch device
Glass frame
Mounting frame with claws
Installation manual
S2 DSK label

Mini Dimmer

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHHD1| 868,4 MHz| 3830062071673| EU, China, UAE, Kuwait, Jordan, Lebanon
ZMNHHD2| 921,42 MHz| 3830062071680| Australia
ZMNHHD3| 908,42 MHz| 3830062071697| USA, Chile, Mexico, Ecuador
ZMNHHD4| 869,0 MHz| 3830062071703| Russia
ZMNHHD8| 865,2 MHz| 3830062071833| India
ZMNHHDC| 868,42 MHz| 3830062071840| Saudi Arabia

Mini Dimmer is the smallest wireless dimmer in the world. Because of its small size, it allows the easiest and quickest installation.

ADVANTAGES

The Qubino Mini Dimmer is the smallest wireless dimmer worldwide
It can be installed in a 2-wired system – no neutral line required
It can be installed also in a 3-wired system – with neutral line
Because of its small size, it fits in even the smallest, most shallow and most crowded electrical boxes
It fits all types of flush mounting boxes worldwide
You can connect and remotely control bulbs from 1W on, no minimum load required
You can dim all types of dimmable bulbs – incandescent, halogen, LED, LED strip, CFL
It has a LED signalization, to easily recognize, if the Mini Dimmer is included or excluded from the network, be aware in case of overload or overheating and when the calibration is in progress
Extremely low energy consumption: less than 0.4 W
Smart Start
Security 2 Authenticated

TECHNICAL DATA

Power supply	110 – 240 VAC ±10% 50/60Hz, (24-30VDC*)
Rated load current of AC output	0.85A / 240 V AC
Output circuit power of AC output (resistive load)	200W / 240 V AC
Power monitoring accuracy (2-wire)	± 10%
Power monitoring accuracy (3-wire)	± 2%
Operation temperature	-10 ~ +40°C (14 ~ 104°F)
Distance	up to 30 m indoors (98ft)
Dimensions (W x H x D)	38mm x 33,5mm x 15,5mm
Package dimensions (W x H x D)	72mm x 84mm x 41mm
Weight	24 g
Electricity consumption	0.4 W
For installation in boxes	Ø ≥ 60 mm or 2M / depth≥ 60 mm (2,36 in)
Switching	MOSFET (Trailing edge)
Z-Wave Repeater	Yes

Additional information is available in the technical specifications.

***** 24-30VDC connection is used only for adding, removing or performing device reset with S button.

WIRING DIAGRAM

DIM ALL TYPES OF DIMMABLE BULBS

Incandescent up to 200W
CFL up to 150W
Halogen up to 200W
LED strip up to 150W
LED up to 150W

PACKAGE CONTAINS:

Device
installation manual
S2 packaging label

Flush Dimmer 0-10V

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHVD1| 868,4 MHz| 3830062070553| EU, China, UAE, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon
ZMNHVD2| 921,42 MHz| 3830062071055| Australia, Domenican republic
ZMNHVD3| 908,42 MHz| 3830062070607| USA, Argentina, Mexico, Chile, Ecuador
ZMNHVD4| 869,0 MHz| 3830062071062| Russia
ZMNHVD5| 865,2 MHz| 3830062071079| Israel
ZMNHVD8| 868,42 MHz| 3830062071086| India

This device is used for dimming lights and control of any device with 0-10V input control. Device has a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal.

ADVANTAGES

Standard (0-10) V OUTPUT and a multi-function input, which can be a: push button / switch / potentiometer / (0-10) V signal
INPUT (0-10) V (any sensor with (0-10) V output)
Perfect for dimming lights with ballast (0 to 10) V
Controlling fan speed (for motors or frequency inverters with (0- 10) V speed control input)
Controlling heating/cooling valves (with (0-10) V input)

TECHNICAL DATA

Power supply	(12 to 24) V DC
Max. sinking control voltage	(- 20 / +20) V DC
Max. sourcing control voltage	(0 to 11) V DC
Max. sinking current	2 mA
Max. sourcing current	10 mA
Digital temperature sensor range (sensor must be ordered separately)

-25℃~+80℃
Operation temperature| (-10 to 40) °C
Distance| up to 30 m indoors
Dimensions (W x H x D) (package)| 41.8 mm x 36.8 mm x 15.4 mm (79 mm x 52 mm x 22 mm)
Weight (Gross with package)| 28 g (34 g)
Electricity consumption| 0.5 W
Z-Wave Repeater| Yes
Additional information is available in the technical specifications.

Wiring

PACKAGE CONTAINS

Device
installation manual

Flush RGBW Dimmer

ORDERING CODE	Z-WAVE FREQUENCY	COUNTRY/REGION
ZMNHWD1	868.4 MHz	CEPT, China, Singapore, South Africa, UAE
ZMNHWD2	921.4 MHz	Australia, Brazil, New Zealand
ZMNHWD3	908.4 MHz	Chile, Mexico, USA/Canada
ZMNHWD4	869.0 MHz	Russia

This device is used to control RGB/RGBW strips and LED strips or bulbs to create countless colour options and has 6 special scene effects. It can also control halogen lights and fans. Its extremely small size allows for easy installation behind wall sockets and switches. Controlled devices may be powered by 12 or 24 VDC. All IN and OUT terminals may be user configured for LED control or 100 kΩ signal readouts.

Wiring diagram

ADVANTAGES

Small size
Control of RGB, RGBW strips and LED strips or bulbs, halogen lights and fans
High output power
6 special scenes effects

TECHNICAL DATA

Power supply	12 / 24 VDC
PWM output frequency	488 Hz
Rated output power	8 A for single output channel,13 A at max.(3,25 A for

R.G.B.W. single output channel is suggested)
Max load (e.g. halogen bulbs)| At 12 V- 156 W combined
At 24 V- 312 W combined
LED Indicator| Red/Green *1
Operation temperature| 0 ℃~40 ℃
Distance| up to 30 m indoors
Dimensions (W x H x D)| 40.5 mm x 32 mm x 14.5 mm
Package dimensions (W x H x D)| 79 mm x 52 mm x 22 mm
Weight| 28 g
Gross weight (packaging included)| 34 g
Electricity consumption| 12V: 0.48 W; 24V: 0.72 W
For installation in boxes| Ø ≥ 60 mm or 2M
Additional information is available in the technical specifications.

PACKAGE CONTAINS
Device with installation manual.

DIN Dimmer

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHSD1| 868.4 MHz| 3830062070386| EU, China, UAE, Kuwait, Jordan, Lebanon
ZMNHSD2| 921.4 MHz| 3830062071024| Australia
ZMNHSD3| 908.4 MHz| 3830062070997| USA, Mexico, Chile, Ecuador
ZMNHSD4| 869.0 MHz| 3830062071031| Russia
ZMNHSD5| 916 MHz| 3830062071048| Israel
ZMNHSD8| 865,2 MHz| 3830062071000| India
ZMNHSDC| 868.42 MHz| 3830062071529| Saudi Arabia

This device is used for dimming the bulb. The device can be controlled either through a Z-Wave network or through the wall switch. The device is designed to be mounted inside an electrical cabinet onto DIN rail. Device measures power consumption of bulb or fan and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.

ADVANTAGES

(MOSFET switching) dimming device in the world which also supports control of: low voltage halogen lamps with electronic transformer, dimmable compact fluorescent light.
Dimming loads: (1 to 200) W
Easy installation The device is designed to be mounted inside an electrical cabinet onto DIN rail.
Extremely low energy consumption: less than 0.7 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of digital temperature sensor.
Power consumption measurement integrated

TECHNICAL DATA

Power supply	(110 to 240) VAC ± 10 % 50/60 Hz ***** , (24 to 30) VDC
Rated load current of AC output	0.85 A/240 V AC
Rated load current of DC output	0,85 A/30 V DC
Output circuit power of AC output (resistive load)	200 W (240 V AC)
Output circuit power of DC output (resistive load)	21 W (24 V DC)
Power monitoring accuracy	± 2 W

Digital temperature sensor range

(sensor must be ordered separately)

**** 50Hz for ALL ORDERING CODES; 60Hz for ZMNHSD2

WIRING DIAGRAM
110-240 V AC/ 24 V DC

PACKAGE CONTAINS

Device with
Installation manual

DIN Pilot Wire

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHUD1| 868.4 MHz| 3830062070461| EU, China, Saudi Arabia, UAE, Kuwati, Jordan, Lebanon

DIN Pilot Wire is used to control electric radiators with 6 different working modes by pilot wire control signal. The module can be controlled either through a Z-Wave network or through the wall switch. DIN Pilot Wire is designed to be mounted inside an electrical cabinet onto DIN rail. The device supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

ADVANTAGES

MOSFET switching to ensure appropriate Pilot Wire control
Easy installation The device is designed to be mounted inside an electrical cabinet onto DIN rail.
Extremely low energy consumption: less than 0.7 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of digital temperature sensor.

TECHNICAL DATA

Power supply	(110 to 240) V AC ± 10 % 50/60 Hz ***** , (24 to 30) V DC
Rated load current of AC output	0.85 A/240 V AC
Rated load current of DC output	0,85 A/30 V DC

Output circuit power of AC output

(resistive load)

| 200 W (240 V AC)
Output circuit power of DC output

(resistive load)

| 21 W (24 V DC)
Power monitoring accuracy| ± 2 W
Digital temperature sensor range

(sensor must be ordered separately)

WIRING DIAGRAM
110-240 VAC

PACKAGE CONTAINS

Device
User manual

Flush Pilot Wire

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHJD1| 868.4 MHz| 3830062070454| EU, China, Saudi Arabia, UAE, Kuwati, Jordan, Lebanon

This Z-Wave module is used to control electric radiators with 6 different working modes by pilot wire control signal. The module can be controlled either through a Z-Wave network or through the wall switch. The module is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch. Module supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

ADVANTAGES

MOSFET switching to ensure appropriate Pilot Wire control
The smallest Pilot Wire device in the world
Extremely low energy consumption: less than 0.7 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of digital temperature sensor.

TECHNICAL DATA

Power supply	(110 to 240) V AC ± 10 % 50/60 Hz*, (24 to 30) V DC

Rated load current of AC/DC output

(resistive load)*

| 0,6A / 240VAC; 0,6A / 110VAC; 0,85A / 30VDC
Output circuit power of AC/DC output (resistive load)| 140W (240VAC); 66W (110VAC); 21W (24VDC)
Power measurement accuracy| +/-2W
Digital temperature sensor range| -25 ~ +80°C (-13~ 176°F), resolution 0.1°C
Distance| up to 30 m indoors
Operation temperature| -10 ~ +40°C (14 ~ 104°F)
Z-Wave operation range| up to 30mindoors (98 ft)
Dimensions (WxHxD) (package)| 41,8×36,8×16,9 mm (79x52x22 mm) / 1,65×1,45×0,66 in (3,11×2,05×0,87 in)
Weight (with package)| 28g (34g) / 0.98oz (1.20oz)
Electricity consumption| 0.7 W
For installation in boxes| Ø ≥ 60 mm (2,36 in) or 2M
Switching| MOSFET (Trailing edge)
Z-Wave Repeater| Yes
Additional information is available in the technical specifications.
* 50Hz for ALL ORDERING CODES; 60Hz for ZMNHJD1

Additional information is available in the technical specifications.

50Hz for ALL ORDERING CODES; 60Hz for ZMNHJD1

WIRING DIAGRAM
230 VAC

PACKAGE CONTAINS

Device
User manual

Flush 1 Relay

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHAD1| 868.4 MHz| 3830062070102| EU, China, Saudi Arabia, UAE, Kuwati, Jordan, Lebanon
ZMNHAD2| 921. 4 MHz| 3830062070850| Australia, Domenican republic
ZMNHAD3| 908.4 MHz| 3830062070652| USA, Chile, Mexico, Ecuador
ZMNHAD4| 869.0 MHz| 3830062070867| Russia
ZMNHAD5| 916 MHz| 3830062070874| Israel
ZMNHAD8| 865,2 MHz| 3830062070881| India

Flush 1 Relay is used for switching On or Off the electrical device (e.g. light, fan, etc.). The device can be controlled either through a Z-Wave network or through the wall switch. The device is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch.

ADVANTAGES

OMRON relay used for switching ensure long durability and top quality.
The smallest 1 relay device in the world.
Special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box. PROVED and TESTED BY PROFESSIONAL ELECTRICIANS!
Extremely low energy consumption: less than 0.4 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of digital temperature sensor.
Power consumption measurement.
2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc.

TECHNICAL DATA

Power supply	(110 to 240) VAC ± 10 % 50/60Hz*, (24 to 30) VDC
Rated load current of AC output (resistive load)	1 X 10 A/240 V AC
Rated load current of DC output (resistive load)	1 X 10 A/30 V DC
Output circuit power of AC output (resistive load)	2300 W (240 V AC)
Output circuit power of DC output (resistive load)	240 W (24 V DC)
Power monitoring accuracy	P= (5 to 50) W, ± 3 W; P˃50 W, ± 3 %
Digital temperature sensor range (sensor must be ordered separately)

Additional information is available in the technical specifications.

50Hz for ALL ORDERING CODES; 60Hz for ZMNHAD2

WIRING DIAGRAM

PACKAGE CONTAINS

Device
Installation manual

Flush 1D Relay

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHND1| 868.4 MHz| 3830062070072| EU, China, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon
ZMNHND2| 921.4 MHz| 3830062070898| Australia, Brazil, New Zealand
ZMNHND3| 908.4 MHz| 3830062070638| Chile, Mexico, USA/Canada
ZMNHND4| 869.0 MHz| 3830062070904| Russia
ZMNHND5| 916 MHz| 3830062070911| Israel
ZMNHND8| 865,2 MHz| 3830062070928| India

Flush 1D Relay is used for switching On or Off the electrical device (e.g. light, fan, etc.). Output contact is voltage free (dry contact), so also loads with different power supply can be connected to the device. The device can be controlled either through a Z-Wave network or through the wall switch. The device is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch.

ADVANTAGES

Dry contact – voltage free
OMRON relay used for switching ensure long durability and top quality.
The smallest smart switch device in the world.
Extremely low energy consumption: less than 0.4 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of the digital temperature sensor.
2 binary inputs offer the option to connect additional devices such as sensors, switches/push buttons, etc.

TECHNICAL DATA

Power supply	(110 to 240) VAC ± 10 % 50/60Hz*, (24 to 30) VDC
Rated load current of AC output (resistive load)	1 X 10 A/240 V AC
Rated load current of DC output (resistive load)	1 X 10 A/30 V DC
Output circuit power of AC output (resistive load)	2300 W (240 V AC)
Output circuit power of DC output (resistive load)	240 W (24 V DC)
Digital temperature sensor range (sensor must be ordered separately)

50Hz for ALL ORDERING CODES; 60Hz for ZMNHND2**

Additional information is available in the technical specifications. 50Hz for ALL ORDERING CODES; 60Hz for ZMNHND2

PACKAGE CONTAINS:

Device
Installation manual

WIRING DIAGRAMS

Flush 2 Relays

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHBD1| 868.4 MHz| 3830062070119| EU, China, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon
ZMNHBD2| 921.4 MHz| 3830062070935| Australia, Domenican republic
ZMNHBD3| 908.4 MHz| 3830062070669| USA, Argentina, Mexico, Chile, Ecuador
ZMNHBD4| 869.0 MHz| 3830062070942| Russia
ZMNHBD5| 916 MHz| 3830062070959| Israel
ZMNHBD8| 865,2 MHz| 3830062070768| India

Flush 2 Relay is used for switching On or Off two electrical devices (e.g. lights, fans, etc.). The device can be controlled either through a Z-Wave network or through the wall switches. The device is designed to be mounted inside a “flush mounting box” and is hidden behind a traditional wall switch.

ADVANTAGES

OMRON relays used for switching ensure long durability and top quality.
The smallest 2 relays device in the world.
Special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box. PROVED and TESTED BY PROFESSIONAL ELECTRICIANS !
Extremely low energy consumption: less than 0.4 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for the connection of digital temperature sensor.
Power consumption measurement.

TECHNICAL DATA

Power supply	(110 to 240) V AC ± 10 % 50/60Hz*, (24 to 30) V DC
Rated load current of AC output (resistive load)	2 X 4 A/240 V AC
Rated load current of DC output (resistive load)	2 X 4 A/30 V DC
Output circuit power of AC output (resistive load)	2 X 920 W (240 V AC)
Output circuit power of DC output (resistive load)	2 X 96 W (24 V DC)
Power monitoring accuracy	P= (0 to 200) W, ± 2 W; P˃200 W, ± 3 %
Digital temperature sensor range (sensor must be ordered separately)

-25℃~+80℃
Operation temperature| (-10 to 40) °C
Distance| up to 30 m indoors
Dimensions (W x H x D)| 41.8 mm x 36.8 mm x 16.9 mm
Package dimensions (W x H x D)| 79 mm x 52 mm x 22 mm
Weight| 28 g
Gross weight (packaging included)| 34 g
Electricity consumption| 0.4 W
For installation in boxes| Ø ≥ 60 mm or 2M
Switching| Relay (2x)
Z-Wave Repeater| Yes
Additional information is available in the technical specifications.
* 50Hz for ALL ORDERING CODES; 60Hz for ZMNHBD2

Additional information is available in the technical specifications.

50Hz for ALL ORDERING CODES; 60Hz for ZMNHBD2

WIRING DIAGRAM

PACKAGE CONTAINS

Device
Installation manual.

Flush Shutter

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHCD1| 868.4 MHz| 3830062070126| EU, China, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon
ZMNHCD2| 921.4 MHz| 3830062071260| Australia, Brazil, New Zealand
ZMNHCD3| 908.4 MHz| 3830062070645| Chile, Mexico, USA/Canada
ZMNHCD4| 869.0 MHz| 3830062071253| Russia
ZMNHCD5| 916 MHz| 3830062071246| Israel
ZMNHCD8| 865,2 MHz| 3830062070775| India

This device is used to control the motor of blinds, rollers, shades, venetian blinds, windows, etc. It also supports venetian blind slats tilting and it can be controlled either through a Z-Wave network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end limit switches.

ADVANTAGES

Support venetian blind slats tilting
OMRON relays used for switching ensure long durability and top quality.
The smallest blinds control device in the world.
Special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box
Extremely low energy consumption: less than 0.4 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for precise positioning.
Support for the connection of digital temperature sensor.
Power consumption measurement.

TECHNICAL DATA

Power supply	(110 to 240) V AC ± 10 % 50/60Hz*
Rated load current of AC output (resistive load)	2 X 4 A/240 V AC
Output circuit power of AC output (resistive load)	2 X 920 W (240 V AC)
Power monitoring accuracy	P= (0 to 200)W, ± 2W; P˃200W, ±3%
Digital temperature sensor range (sensor must be ordered separately)

-25℃~+80℃
Operation temperature| (-10 to 40) °C
Distance| up to 30 m indoors
Dimensions (W x H x D)| 41.8 mm x 36.8 mm x 16.9 mm
Package dimensions (W x H x D)| 79 mm x 52 mm x 22 mm
Weight| 28 g
Gross weight (packaging included)| 34 g
Electricity consumption| 0.4 W
For installation in boxes| Ø ≥ 60 mm or 2M
Switching| Relay (2x)
Z-Wave Repeater| Yes
Additional information is available in the technical specifications.
* 50Hz for ALL ORDERING CODES; 60Hz for ZMNHCD2

Additional information is available in the technical specifications.

50Hz for ALL ORDERING CODES; 60Hz for ZMNHCD2

WIRING DIAGRAM FOR for 110-240 V AC

PACKAGE CONTAINS

Device
Installation manual

Flush Shutter DC

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHOD1| 868.4 MHz| 3830062070089| EU, China, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon
ZMNHOD2| 921.4 MHz| 3830062071338| Australia, Domenican republic
ZMNHOD3| 908.4 MHz| 3830062070614| USA, Argentina, Mexico, Chile, Ecuador
ZMNHOD4| 869.0 MHz| 3830062071284| Russia
ZMNHOD5| 916.0 MHz| 3830062071277| Israel
ZMNHOD8| 865,2 MHz| 3830062071291| India

This device is used to control the (12 to 24) V DC motor of blinds, rollers, shades, venetian blinds, windows, etc. It also supports venetian blind slats tilting and it can be controlled either through a Z-Wave network or through the wall switch. Precise positioning is supported for motors equipped with mechanical or electronic end limit switches.

ADVANTAGES

Support venetian blind slats tilting
Protection against accidental short circuit on outputs.
Protection against wrong power supply connection.
Over temperature protection.
The smallest blinds control device in the world.
Special designed casing ensure the most simplified installation (ease of cabling fixing) inside a flush mounting box.
Extremely low energy consumption: cca. 0.3 W.
Extended operating temperatures: (-10 to 40) ˚C.
Support for precise positioning.
Support for the connection of digital temperature sensor.
Power consumption measurement.

TECHNICAL DATA

Power supply	(12 to 24) V DC ±10 %
Rated load current of DC output (resistive load)	2 A
Overcurrent protection	6 A
Output circuit power of DC output (resistive load)	48 W
Power monitoring accuracy	± 5 %
Digital temperature sensor range (sensor must be ordered separately)

Additional information is available in the technical specifications.

Wiring Diagram

PACKAGE CONTAINS

Device
installation manual

Shades Remote Controller

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNKGD1| 868.4 MHz| 3830062071864| EU, China, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon
ZMNKGD2| 921.4 MHz| | Australia, Brazil, New Zealand
ZMNKGD3| 908.4 MHz| | Chile, Mexico, USA/Canada

Qubino Shades Remote Controller is 9 Channel Z-Wave standard handheld product. This product acts as a Z-Wave primary controller with a possibility to support up to 9 Z-Wave shutter modules. The remote enables basic shutter operations: up /down / stop.

ADVANTAGES

Shades control without Gateway (smart home ready shades) – Fig. 1
Easy upgrade to full smart home solution – Fig. 2
Up to 9 shades control with one remote
Slats tilting control for venetian blind*
2XAAA battery for extended battery life
Multiple shades control with single touch
Refer to user manual for details

TECHNICAL DATA

Power supply	2 X AAA alkaline batteries (2X1,5V)
Maximum control distance / Z-Wave operation range	Up to 40 m indoor visual

distance
Maximum radio-frequency power transmitted in frequency band(s)| <2,5mW
Temperature range| 0~40℃ Operating temperature / -10~60℃ Storage temperature
Size| 140mm (L) x 48mm (W) x 18mm (H)
Weight with packaging| 55g (without batteries)

PACKAGE CONTAINS

Device
Installation manual

Smart Meter

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHTD1| 868.4 MHz| 3830062070362| EU, China, UAE, Kuwait, Jordan, Lebanon, Saudi Arabia

This device is used for energy measurements in single-phase electrical power network up to 65 A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals. The device can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network.It is designed to be mounted on DIN rail. Smart Meter supports the latest and the safest communication protocol for Smart Home devices – Security 2 (S2).

ADVANTAGES

Measurement up to 65A (single phase)
Easy installation (DIN rain mounting)
Switching control (ON/OFF) 2x32A (with IKA and BICOM)
Security 2 (S2) Authenticated supported

TECHNICAL DATA

Main terminals (LI, NI, Lo, No)|
---|---
Contacts capacity| (1.5 to 16 (25)) mm2
Connection screws| M5
Max torque| 3.5 Nm (PZ2)
Optional terminals (1,2,4,5)|
Contact capacity| (0.05 to 1 (2.5)) mm2
Max torque| 0.6 Nm
Measuring input|
Type (connection)| single phase (1b)
Reference current (Iref)| 5 A
Maximum current (Imax)| 65 A
Minimum current (Imin)| 0.25 A
Starting current| 20 mA
Voltage (Un)| 230 V (± 20 %)
Power consumption at Un| < 2 W
Nominal frequency (fn)| 50 and 60 Hz*
Input (1)|
Rated voltage| 230 V (± 20 %)
Input resistance| 450 kOhm
Safety|
AC voltage test| 4 kV
Installation Category| 300 Vrms cat. III
Standard| EN 50470
Ambient conditions and EMC|
Dust/water protection| IP20
Operation temperature| (-10 to 40) °C
Storage temperature| (-40 to 70) °C
Enclosure material| self extinguish, complying UL94 V
Indoor meter| Yes
Distance| up to 30 m indoors
Weight| 150 g
Gross weight (packaging included)| 170 g
Installation| DIN rail 35 mm
Dimensions (W x H x D)| 36 mm x 90 mm x 64 mm
Package dimensions (W x H x D)| 40 mm x 95 mm x 80 mm
Colour| RAL 7035
Z-Wave Repeater| Yes
* FOR MORE DETAILS CHECK THE EXTENDED PRODUCT MANUAL

FOR MORE DETAILS CHECK THE EXTENDED PRODUCT MANUAL

WIRING DIAGRAM
The device can control two electrical devices (switching on/off):

one BICOM432-40-WM1 Bistable switch (32 A) controlled by built in optical (IR) communication port and
one IKA232-20/230 V Contactor (32 A) controlled by output on terminal 5.

Additional information for Bistable switch and contactor is available in Smart Meter accessories.

PACKAGE CONTAINS

Device
installation manual
S2 label

3-Phase Smart Meter

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHXD1| 868.4 MHz| 3830062070683| EU, China, UAE, Kuwait, Jordan, Lebanon

Qubino 3-Phase Smart Meter is used for energy measurements in three-phase electrical power network and can be used in residential, industrial and utility applications. The device measures energy directly in 4-wire networks according to the principle of fast sampling of voltage and current signals. It is designed to be mounted on DIN rail. 3-Phase Smart Meter supports the latest and the safest communication protocol for Smart Home devices – Security 2 (S2).

ADVANTAGES

Easy installation (DIN rail mounting)
Reports status change and power consumption for each phase individually
Switching control (ON/OFF) 2x32A (with IKA and BICOM)
MID Ready

TECHNICAL DATA

Main terminals (L1I, L2I, L3I, NO, L1O, L2O, L3O, NO)

±1.5% from Imin to Itr, ±1% from Itr to Imax

Reactive energy:| class 2 EN 62053-23, ±2.5% from Imin to Itr,

±2% from Itr to Imax

Voltage:| ±1% of measured value
Current:| ±1% of Iref from Ist to Iref

±1% of measured value from Iref to Imax

Active Power:| ±1% of nominal power (Un*Iref) from Ist to Iref

±1% of measured value from Iref to Imax

Reactive, Apparent power:| ±2% of nominal power from Ist to Iref

±2% of measured value from Iref to Imax

WIRING DIAGRAM
The device can control two electrical devices (switching on/off):

with BICOM432-40-WM1 Bistable switch (32 A) controlled by built in optical (IR) communication port and
with IKA232-20/230 V Contactor (32 A) controlled by output on terminal 5.

Additional information for Bistable switch and contactor is available under Smart Meter accessories.

PACKAGE CONTAINS

Device
Installation manual
S2 label

Smart Meter Accessories

IKA232-20/230 V
Ordering code: 030 046 833 000
GTIN-13(EAN code): 3838733074046
Device is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32 A. Communication with Smart Meter: over terminals A1 on IKA232-20 and 5 on Smart Meter.

Voltage	230 V ± 10 %, 50/60 Hz
Current	32 A, 2 pole
Operation temperature	(-15 to 55) °C
Storage temperature	(-40 to 80) °C
Dust/water protection	IP20
Weight	130 g
Gross weight (packaging included)	135 g
Installation	DIN rail 35 mm
Dimensions (W x H x D)	17.5 mm x 85 mm x 60 mm
Package dimensions (W x H x D)	20 mm x 95 mm x 70 mm
Coil consumption	1.2 W

PACKAGE CONTAINS

Device
Installation manual

BICOM432-40-WM1
Ordering code: 22.459.113.003
GTIN-13(EAN code): 3838651300012
Device is accessory of Smart Meter. It is used for switching On or Off the electrical load up to 32 A. Communication with Smart Meter: optical (IR) communication port

Voltage	230 V ± 10 %, 50/60 Hz
Current	32 A, 4pole
Operation temperature	(-25 to 55) °C ((˃55 to 70) °C at max. impulse duration

PACKAGE CONTAINS

Device
Installation manually.

Smart Plug 16A

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHYD1| 868.4 MHz| 3830062071505| EU, CN, Saudi Arabia, UAE, Kuwait, Jordan, Lebanon

The Smart Plug 16A controls on/off function for the connected device. It also measures power consumption of the connected device according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy and power from the measured signals.
Smart Plug 16A supports the latest and the safest communication protocol for Smart Home devices – Security 2 (S2).

ADVANTAGES

Easy and quick installation – Plug & Play
The Qubino Smart Plug 16A allows the possibility to manage all appliances in your apartment. You will not be limited to use it only on the small energy consumers
Remote (via smartphone or PC) and local on/off control of bulbs and electrical appliances such as irons, microwave, fans etc.
Security 2 Authenticated

TECHNICAL DATA

Power supply	230 VAC ±10% / 50 Hz
Power load	16A resistive max.
Overload protection	> 16A
Power consumption	< 1W
Housing dimensions	43 x 52 x 75 mm
Housing colour	white
Weight (ex. packaging) Weight with packaging	~ 80g

ELETRICAL DIAGRAM
230 VAC

PACKAGE CONTAINS

Smart Plug 16A
Installation manual
S2 label.

Flush On/Off Thermostat 2

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNKID1| 868.4 MHz| 3830062071710| EU, China, Saudi Arabia, Jordan, Lebanon
ZMNKID2| 921.4 MHz| 3830062071727| Australia, Domenican republic
ZMNKID3| 908.4 MHz| 3830062071734| USA, Argentina, Mexico, Chile, Ecuador
ZMNKID4| 869.0 MHz| 3830062071741| Russia

The Qubino Flush On/Off Thermostat 2 is ideal for remotely controlling electric or water-based underfloor heating systems, electric water heaters, hot water pumps, electric radiators and similar. It is connected directly to either 240 V AC or 24 V DC, no batteries required.

ADVANTAGES

Smart Thermostat measures power consumption of the connected heating system – current consumption in W and acumulated consumption in kWh.
Due to its small size the device can be easily installed inside a flush mounting box and covered with a traditional wall switch with two 1M blank covers.
Fast & Trouble-free set up with Z-Wave SmartArt – Simply scan the QR code on the device, install it and provide with power. Your SmartStart gateway recognizes the device and the inclusion is done automatically.
Protect your smart home from cyber-attacks. Qubino Flush On/Off Thermostat 2 is not only easy to setup but it’s virtually un-hackable, with the highest level of security for smart home devices on the market – Security 2.

TECHNICAL DATA

Power supply	110 to 240 VAC ± 10 % 50/60Hz*, (24 to 30 VDC)
Rated load current of AC output (resistive load)	1 X 10 A/240 V AC
Rated load current of DC output (resistive load)	1 X 10 A/30 V DC
Output circuit power of AC output (resistive load)	2300 W (240 V AC)
Output circuit power of DC output (resistive load)	240 W (24 V DC)
Power measurement accuracy	P= 5 – 50W, ± 3 W; P˃50 W, ± 3 %
Operation temperature	-10 to 40°C (14 to 104°F)
Distance	up to 40m (131ft) indoors
Dimensions (W x H x D)	41.8 mm x 36.8 mm x 15.7 mm
Package dimensions (W x H x D)	72mm x 84mm x 41mm
Weight	48 g
Gross weight (packaging included)	75 g
Electricity consumption	0.4 W
For installation in boxes	Ø ≥ 60 mm (2,36 in) or 2M
Switching	Relay
Digital temperature sensor range	-25℃~+80℃, resolution 0.1 °C
Digital temperature sensor cable lenght	1000 mm
Z-Wave Repeater	Yes

Additional information is available in the technical specifications.

WIRING DIAGRAM
110-240 V AC
24 V DC

CONTROL DIFFERENT TYPES OF HEATING DEVICES

Water heater
Heat pump
Radiator
IR panel
Underfloor heating

PACKAGE CONTAINS

Device,
temperature sensor
installation manual
S2 label.

Smart Leak Protector

ORDERING CODE| Z-WAVE FREQUENCY| GTIN-13 (EAN code)| COUNTRY/REGION
---|---|---|---
ZMNHMD1| 868.4 MHz*| 3830062071857| EU, China, UAE, Kuwait, Jordan, Lebanon

Other frequencies can be arranged/produced upon aggrement
Qubino Smart Leak Protector monitors water consumption, controls water valves and detects irregularities in water consumption. It can be used in various scenarios; you can monitor water consumption, make the water valves close automatically in case of high consumption and leakage detection, you may schedule your garden irrigation scenarios or drive the irrigation through humidity sensor.

ADVANTAGES

Controlling Open/Close status of connected water valve, water pump, etc.
Monitoring and reporting water consumption
Creating user notifications for detected water leakages
Associations with Smart Home gateway
Acting as Z-Wave Repeater
Smart Start
Security 2 Authenticated

TECHNICAL DATA

Power supply	24 – 30 VDC, 35W
Rated load current of relay output (resistive load)	1×10 A (30VDC)
Operation temperature	-10 to 40°C
Z-Wave operation range	Up to 40 m indoors
Z-Wave repeater	Yes
Water meter (not included)	Tube connection: inlet/outlet ¾“ to 2“

Working temperature 0 – 50°C
Working pressure: max. 16 bar
Water meter pulse reader (not included)| 24 VDC, max. 10 W
Cable length: 3 m
Water valve (not included)| 24 VDC, max. 19 W
Tube connection: from ¾“ to 2“
Working pressure: 0,2 – 15 bar
Water leak sensor (included)| Lenght: 2 m
Soan Electronic Techbology Co., Ltd, model SJ002| Connection: 3,5 mm audi jack or copper wires
Additional information is available in the technical specifications.

INSTALLATION

STANDARD PACKAGE CONTAINS

Smart Leak Protector
Water leak sensor
Two mounting plugs with a screw M6X45mm
Installation Manual
Spare label with DSK Code

EXTENDED PACKAGE CONTAINS

24VDC power supply adapter
Water meter with pulse reader

Smart Leak Protector Accessories

**Water Meter*
Ordering code:**
SJM15.0HQD – Maddalena SINGLE JET Water meter, Size 15mm (1/2‘’)
SJM20.0HQD – Maddalena SINGLE JET Water meter, Size 20mm (3/4‘’)

For additional information please contact sales. GTIN-13 (EAN code):
For additional information please contact sales.
Superdry single jet meter for hot or cold water, ideal for domestic indoor divisional applications (sub metering). MID-certified: R max 160, DN: 15 and 20

Reed switch
Ordering code:
REED – Reed switch pulser for SJ PLUS single jet water meters
GTIN-13 (EAN code):
*For additional information please contact sales.
Gives a number of pulses proportional to the volume flowed. 1 pulse/10 liters, 24 Vac/Vdc, 0.1 A, cable length 1m

**Solenoid Water Valve On/Off 24VDC *
Ordering code:*
18521-03-135-B-U – 1/2” Solenoid valve 2/2 ways Normally Open (NO) pilot operated with connector
18521-04-180-B-U – 3/4” Solenoid valve 2/2 ways Normally Open (NO) pilot operated with connector
GTIN-13 (EAN code):
For additional information please contact sales.
The solenoid valves of the 18500 series are 2/2 ways, normally open, direct action, that provide high differential opening pressure with big passing hole. It has brass body and ferritic stainless-steel core.

**Power supply 24VDC *
Ordering code: PPL36W-240
GTIN-13 (EAN code):*
when ordering please specify power outlet type to provide you with correct line cord. Available cord types are North America, Continental Europe, United Kingdom

36W adapter, with non-Vented/Spill-Proof Case. Available connector for North America, UK and EU standards

DOE Level VI Efficiency Compliant
ErP/Eco-design Directive 2009/125/EC –Regulation EU 2019/1782
EU CoCr Tier 2 Compliant (except 12V model)
Over Voltage, Short Circuit and Over Current Protection
Non-Vented/Spill-Proof Case
Class B EMI

Accessories List

Temperature Sensor
Ordering code: ZMNHEA1
GTIN-13 (EAN code): 3830062079006 Digital Temperature Sensor has 1 m cable with connector to connect directly to Qubino devices.

Digital temperature Sensor range	-25℃~+80℃
Cable lenght	1000 mm
Package dimensions (W x H x D)	140 mm x 170 mm x 80 mm
__Gross weight (packaging included)	20 g

Temperature Sensor
Temperature Sensor connection to the device
Installation of the Temperature Sensor inside the 2M casing SET
Installation of the Temperature Sensor inside the Wall Mounted Casing

PACKAGE CONTAINS
Temperature Sensor, installation manual.

Phase Tester
Phase tester 220 – 250 V – 630VDE, VDE 1000V isolated

2M Casing SET
Ordering code: ZMNHFA1
GTIN-13 (EAN code): 3830062079013

Material	PC/ABS
Dimenssions	2M
Package dimensions (W x H x D)	80 mm x 80 mm x 35 mm
__Gross weight (packaging included)	44 g

Temperature Sensor can be installed behind 2M Casing SET. SET is suitable for mounting on boxes Ø60 with claws. SET consists of:

1 X mounting frame 2M with claws,
2 X 1M perforated blank cover,
1 X cover plate
2M Casing SET
Mounting frame with claws
2 X 1M perforated blank cover to fill empty space Colour: Polar white
Cover plate 2M Colour: Polar white

PACKAGE CONTAINS
2M Casing SET and installation manual.

Wall Mounted Casing
Ordering code: ZMNHGA1
GTIN-13(EAN code): 3830062079020 Temperature sensor can be installed inside Wall Mounted Casing.

Dimenssions	71 mm x 71 mm x 27 mm
Colour	White
Material	ABS
Package dimensions (W x H x D)	105 mm x 75 mm x 28 mm
Gross weight (packaging included)	34 g

Wall Mounted Casing scheme
Installation of the Temperature Sensor inside the Wall Mounted Casing
Wall Mounted Casing front and side view

PACKAGE CONTAINS
1 Wall Mounted Casing and 1 installation manual

Surface Door Sensor
Ordering code: NEDJAA1
GTIN-13(EAN code): 3830062079037
Sensor comes in three parts. Door mounted part is screwed by two screws on the door, the second part – Door frame part goes screwed on the door frame, this part has 2 connectors for 2 wires. Third part is called Cover for connectors and covers connectors.
When the door is closed the two parts should be aligned. Material: Anti-fire ABS shield

Material:	Anti-fire ABS shield
Connecting mode:	N.C.
Rated current:	300 mA
Rated voltage :	200 V DC
Operating distance:	More than 15 mm, less than 25 mm
Rated power:	3 W
Package dimensions (W x H x D):	85 mm x 94 mm x 22 mm
Gross weight (packaging included):	26 g

PACKAGE CONTAINS
Wall Mounted Casing and installation manual.

Built-in Door Sensor
Ordering code: NEDJAA2
GTIN-13(EAN code): 3830062079044
Sensor comes in two parts. One part is built-in in the door, while the second part with 2 wires is inserted on the door frame. When the door is closed the two parts should be aligned.

Material:	Anti-fire ABS shield
Connecting mode:	N.C.
Rated current:	100 mA
Rated voltage :	200 V DC
Operating distance:	More than 15 mm, less than 25 mm
Rated power:	2 W
Wires length:	150 mm
Package dimensions (W x H x D):	79 mm x 52 mm x 22 mm
Gross weight (packaging included):	12 g

PACKAGE CONTAINS
Built-in Door Sensor and installation manual.

Splicing Connector
Ordering code: GEKDAA1
GTIN-13(EAN code): 3830062079051
COMPACT splicing connectors for all wire types; 5-conductor wire block; with operating levers; max. operating temperature 85 °C
Total number of connection points : 5

Total number of connection points :	5
Rated voltage EN (1) [V]:	450 V
Nominal current [A]:	32 A
Solid sizes 1:	(0.2 to 4) mm²/(24 to 12) AWG
Fine-stranded wires 1:	(0.14 to 4) mm²/(24 to 12) AWG
Stranded, connectable 1.:	(0.2 to 4) mm²/(24 to 12) AWG
Dimensions (W x H x D):	29.9 mm x 8.3 mm x 18.6 mm
Gross weight:	4.07 g

PACKAGE CONTAINS
Splicing Connector and installation manual.

Fuse Holder 5 x 20 mm
Ordering code: FS5X20
Terminal with 5 x 20 mm fuse holder, type Adel’s-Contact 503 Si/1DS
PACKAGE CONTAINS
100 pcs Terminal 5 x 20 mm with fuse holder

Dimensions (W x H x D):	330 mm x 220 mm x 35 mm
Gross weight:	585 g

Micro Fuse 5 x 20 mm
The fuse must be installed in fuse holder: Adel’s contact 503 Si/ 1DS.

Micro Fuse type	Ordering code
Micro fuse (Ø x L) 5 mm x 20 mm 0.05 A used for Flush Dimmer 0-10V	ESKA

522.504
Micro fuse (Ø x L) 5 mm x 20 mm 1 A used for Flush Dimmer| ESKA 522.717
Micro fuse (Ø x L) 5 mm x 20 mm 4 A used for Flush Shutter, Flush 2 Relays| ESKA 522.723
Micro fuse (Ø x L) 5 mm x 20 mm 5 A used for Flush Shutter DC| EKSA 522.724
Micro fuse (Ø x L) 5 mm x 20 mm 10 A used for Flush 1 Relay, Flush 1D Relay| ESKA 522.727
|
Dimensions (W x H x D):| 110 mm x 93 mm x 72 mm
Gross weight:| 1120 g

PACKAGE CONTAINS
1000 pcs Micro fuse 5 x 20 mm

All technical specifications in this document are subject to change without prior notice.

Qubino is GOAP’s trademark
GOAP is an EU-based innovator and manufacturer of wireless smart home devices. We build the smallest Z-Wave devices in the world. Our devices make smart homes more secure, comfortable, and efficient. Beyond that, we bring fun, luxury, and new experiences into our users’ homes. GOAP has many years of experience in automation projects and a proven track record in successful implementation of automation systems on 50% of the biggest and most luxurious cruise ships on the planet. GOAP is part of the Kolektor Group, a billion -dollar global company.

QUBINO Wireless Smart Home APP 77