INDITECH Parallel Lop 75×275 Black Facia Dot Touch 2pb 24v User Manual
- June 9, 2024
- Inditech
Table of Contents
INDITECH Parallel Lop 75×275 Black Facia Dot Touch 2pb 24v
CONNECTION DETAILS
Note: For connection details refer below page.
DISPLAY AND TOUCH BUTTON CONNECTION DETAILS
Mounting Details
Features
- We can provide logo as per customer demand.
- Facia- Black/White
- Display Type- Dot Matrix
- Buttons – Touch
- Reliable
- Easy to use
- Durable
- Reliable
Specifications
- Input Supply- 24V
- LOP size-75×275
- Thickness-18MM
- Mount Type- Wall mount
Calibration process
- Give segment which is set to for floor.
- Press S1 and S2 both keys then display shows ‘- – ‘then release both the keys.
- When’- -‘ symbol stop blinking, press S1 and S2 for increment & decrement.
- After pressing S1 & S2 keys for increment and decrement it shows digits Which we have to set.
- After showing display which is we have to set, then release the key after sometime.
- Display will blink and shows – – means calibration is saved & it will display Saved floor.
- Repeat same procedure for next floor calibration.
Calibration reset process
- If we want to display only normal 7 segment then no need to calibrate.
- Short the pin no. 1&2 of J4 berg strip for 10 second.
- After completion of 10 second display is shows FR it means process is Completed and program is in normal 7 segment mode.
- Give 7 segments to the connector J1, display will show floor.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>