LEE PRECISION 90194 Long Charging Die Instructions
- June 9, 2024
- LEE PRECISION
Table of Contents
LEE PRECISION 90194 Long Charging Die Instructions
FOR USE WITH LEE PRO AUTO-DISK AND AUTO-DRUM POWDER MEASURES
- Screw the charging die into your powder measure, verify the actuator drop tube is inside.
- Adjust powder measure with empty case in the shell holder and ram fully raised. Screw unit into the press just enough to fully move the disk or drum to the dump position.
DIPPING POWDER CHARGE BY HAND
Put case in shell holder, raise ram to top of stroke, screw die in until you feel the case mouth bottom out against the rifle drop tube.
WARNING This product may contain steel alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov. To prevent exposure, do not alter the product by welding, grinding, etc.
4275 COUNTY ROAD U HARTFORD WI 53027
References
Read User Manual Online (PDF format)
Loading......