Junsun B094N8PXQD Car Radio for Toyota Tacoma 2005-2015 User Manual
- June 9, 2024
- Junsun
Table of Contents
Junsun B094N8PXQD Car Radio for Toyota Tacoma 2005-2015
Product Information
The product is a multimedia device that can be installed in vehicles. It comes with a wiring definition diagram that shows the different cables and their functions. The device has several components including AMP, Radio ANT, GPS antenna, USB ports, RCA connectors, and an 8-PIN Connector for Canbus. The device has a variety of cables including GND, ACC, BACK, KEY1, FR-, FR+, FL-, FL+, B+, ILL, KEY2, ANT-12V, RL-, RL+, RR-, RR+, AMP_POW, AUXIN_R, AUXIN_L, NC, CAMERA CVBS, MIC microphone- and MIC+ microphone+.
Product Usage
- Before using the device, refer to the wiring definition diagram and make sure that all cables are correctly connected to their respective ports.
- Once the device is properly installed, connect your multimedia device (such as a phone or music player) to the device using the USB port or AUX input.
- To turn on the device, turn on the vehicle’s ignition and press the power button on the device.
- The device allows for various functions including radio,GPS navigation, and media playback. Use the touchscreen interface to select the desired function.
- To adjust volume, use the volume controls on the device or the vehicle’s own volume controls.
- When reversing the vehicle, the device will automatically display reverse camera feed if one is connected to the CAM_CVBS and CVBS_GND ports.
- To turn off the device, press and hold the power button until the device shuts down.
Note: For more detailed instructions on specific functions, refer to the product manual provided with the device.
Wiring Definition Diagram
-
AMP_ POW (A mplifier control)
-
AUXIN_R (Right channel input)
-
AUXIN_L (Left channel input)
-
NC (Not used)
-
NC (Not used)
-
NC (Not used)
-
NC (Not used)
-
NC (Not used)
-
FCAMERA CVBS
-
MIC microphone –
-
GND (RCA FL/ RCA FR)
-
RCA_FL (Front left audio output)
-
RCA_FR (Front right audio output)
-
GND (AUX IN_L/AUXIN_R )
-
GND (CVBS_ IN2)
-
GND ground (CVBS_ IN1/CVBS_OUT)
-
CVB OUT1
-
SUB subwoofer output
-
AUXINCVBS
-
MIC+ microphone +
-
GND (AUX IN L/AUXIN R )
-
AUX2_ L
-
KEY_ RST
-
CAN_TXD(CANBUS)
-
POW_ 12V
-
AUX2_ R
-
IPOD_ DET
-
CAN_TXD(CANBUS)
-
USB_5V
-
GND USB
-
USB_ DP0 USB0
-
USB_ DN0 USB0
-
USB_5V
-
GND USB
-
USB_ DN2 USB2
-
USB_ DP1 USB1
-
USB_ DN1 USB1
-
USB_ DP2 USB2
-
TXD_TPMS OBD
-
RXD_TPMS OBD
-
FRONT IR
-
CAM_ 12V( Reverse image)
-
PARK_ IN( Hand brake detection)
-
BT ANT
-
GND
-
CAM_CVBS( Reverse image)
-
CVBS_GND( Reverse image)
-
WIFI ANT
CONNECTION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>