RANVOO FG7 Wearable Smart Air Conditioner User Guide

RANVOO FG7 Wearable Smart Air Conditioner

Specifications

• Product Name Wearable Smart Air Conditioner
• Model FG7
• Wireless Name  LH-ACIES
• Wireless Transmission Distance <5m (barrier-free)
• Input 5V3A/9V2.8A
• Lithium Battery Capacity 7000mAh/ 27 Wh
• Limit Voltoge Of Lithium 4.2V Battery Charging IF
• Operating Temperature 0°C-45 C
• Package List Wearable Smart Air Conditioner *1, Charging Cable x1, User Manual 1 XRBS, TDAA,

The parameters above are derived from the laboratory of RANVOO. The actual parameters would be different because of products or other factors. The image shown here is indicative only.

Important notice

Save for future use. It should not be used by people who cannot take care of themselves, infants or people who are not sensitive to heat.

1. This product should not be used by children under the age of 10 alone, unless the parent or guardian has set the product in advance, or has guided the children about how to use the product.
2. Do not use this product for baby strollers.
3. Please do not put your fingers or any other objects into the protective net when the product is Working, to prevent injury.
4. This product contains highly sensitive electronic components (including batteries, cooling plates, etc.), which can be damaged or result in personal injury if dropped, burned, pierced, extruded, disassembled or exposed to high temperatures, liquids or high concentrations of industrial chemicals (including near evaporative liquefied gases, such as helium).
5. Some components of this product may interfere with related medical equipment such as cardiac pacemakers and defibrillators. It is not recommended for users with implanted medical devices to use this product. If you need to use it, please consult your doctor first and use it under the doctor’s advice. (After getting permission from your doctor) If you find that this product is interfering with your medical equipment, please stop using it.
6. Please choose to use the appropriate time and temperature, according to your physical condition and environment temperature. It is recommended that you use the cooling/heating mode for no more than 30 minutes at a time to avoid the risk of discomfort in over cold or low temperature burn.
7. If you feel discomfort in the process of using or after use, please stop using. In case of any accident, please see a doctor immediately.
8. Please avoid subjecting the product to shocks such as long-distance vibration or falling from height.
9. It is prohibited to use the product after immersion in water.
10. Do not place the product in places where it is humid, of high temperature and other extreme conditions. Do not put the product in the car to expose it to the sun, so as not to cause damage to the product.
11. Do not expose this product to rain, liquid or moisture to reduce the risk of fire or electric shock; do not place objects containing liquids (Such as vases, etc.) on or near this product.
12. Don’t use it near the heating equipment and other places with hot air or fire work, or in places (such as swimming pool, hot spring, kitchen, etc.) that are prone to generate a lot of dust, fog, and oil smoke.
13. Please use a charger that has obtained certification and meets standard requirements for charging. There is a risk of death or injury by charging with a charger that does not meet the certification standards.
14. Please stop using the charging cable in case of breakage. Using a broken charging cable or charger, or charging in a humid environment, can result in the risk of fire, electric shock, injury, damage to products or other property.
15. When the product is faulty and needs to be repaired, it must be replaced by the manufacturer, maintenance department or professionals to avoid danger. Other people are not allowed to dismantle and repair.
16. When not in use, dean the oil and dust from the product surface. After cooling to room temperature, store in a dry and ventilated place, avoid pressing.

Battery Warning

1. Please charge the product in time when the battery is low. To protect the battery, please turn on the product every 3 months until the battery power runs out and then fully charge the product, when not in use for a long time. It is recommended to use and store it in a suitable environment
2. It is forbidden to disassemble, hit, squeeze or throw it into fire. If severe swelling occurs, stop to use it and handle it to professional maintenance.
3. There is a risk of explosion if the battery is improperly replaced, and it can only be replaced itch a battery of the same or equivalent type by a professional.
4. The battery (battery pack or assembled battery) shall not be exposed to overheated environments such as sunlight or fire.
5. Products containing lithium batteries should be handled separately from household waste. If the product is disposed of, it is necessary to Remo battery and insulate the positive and negative ends and put it into the designated recycling locations or hand it over to the environmental protection recycling department for disposal, and cannot discard it at will.
6. Steps to remove the battery: T Use tools to pry the decorative panel and metal decorative parts; 2 Remove the screws on the right shell and pry the upper and louver shells with a screwdriver; Remove the screws of the circuit board with a screwdriver, then unplug the battery socket to take out the battery, 4Remove the left battery in the same way. (Special warning: Do not cut off all the cables between the battery and the circuit board at the same time )

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an Outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC RE Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with RE radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 5mm between the radiator and your body.

Warranty Card

• Product Name
• Customer Name
• Phone Number
• Date of Purchase:
• Address Notes

Manufacturer:
SHENZHEN RANVOO DIGITAL TECHNOLOGY CO., LTD.
ttbt Address:|ltRAGEMAËTBRHRAE
RM1215, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China PR Domestic Tel: 400-838-2815 BM
Official Website: www.ranvoo.com
Business Cooperation : [email protected]
Email: [email protected]
Shenzhen RANVOO Digital Technology Co., Ltd. All Rights Reserved. h Made in China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>