MASTER MT-DP96MF Digital Multifunction Meter User Manual

MASTER MT-DP96MF Digital Multifunction Meter User Manual

MT-DP96MF

Thanks for choosing our product – MT-DP96MF, Please read this manual carefully and pay attention to below caution matters.

CAUTION

• This product should be installed and maintained by professional person
• Before operating this product inside or outside, please cut off the input signal and power supply;
• Please make sure all parts of the product don’t have voltage by suitable voltage detection device
• The power supply should be within the rated range

The below situation will result in device damage and abnormal working

• Auxilliary power source voltage over range
• Distribute system frequence over range
• Current, voltage input polarity incorrect
• Disconnect the communication plug under charged situation
• No according requirement to connect termial

**** Please don’t touch the terminals when the meter is in operation!

1. Function introduce

2. Technical parameter

3. Installation and correction

4. Display & Buttons

a. Four lines digital display measure information: Three phase voltage, three phase current, active power, reactive power, power factor, frequence, switch input, output, other switch input, two way actice power, two way reactive power, analog input, demand
b. K is light mean practice value is display value is 1.000 times. M is light mean practice value is display value is 1.000.000 times
c. Measure item unit or charactierise: three phase voltage V, three phase current A, active power W, reactive power VAR…
d. Buttons use in change or programme set:

If there is no relative symbol display or the set data not working, It means the product without the relative function

FIG 12 Display & Buttons.JPG

FIG 13 Display & Buttons.JPG

FIG 14 Display & Buttons.JPG

FIG 15 Display & Buttons.JPG

FIG 16 Display & Buttons.JPG

FIG 17 Display & Buttons.JPG

5. Programme operation

In programme status, digital interface adopt layers structure menu type, meter supply three lines number display (se fig. 5)

No.1 line is first layer menu information;
No.2 line is second layer menu information;
No.3 line is third layer menu information;
Exp: The fig.5 shown: No.1 layer: INPT = Signal input; No.2 layer: CT = current transformer; No.3 layer: current value is 5, It means ratio of CT is 25/5A.
The digital display interface menu has the following organizational structure, the user can choose the appropriate setting parameters according to the actual situation.

Note: The above menu is applied to the product with complete functions. If you find there is no such menu in the product or the menu is not working, It means the product not supporting the function.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>