javiscam 4MP Spy Camera WIFI Hidden Camera User Guide
- October 29, 2023
- javiscam
Table of Contents
javiscam 4MP Spy Camera WIFI Hidden Camera
Notice
-
Keep the device in a strong WiFi area if you need realtime monitor or cloud storage.
-
More triggered motion detection cost more power.
After fully charged, the camera can work for 3 months if only a few recording triggered. -
Please turn on the notification in your phone’s setting if you want the alarm function.
-
Using memory card: Please format it before first time use.
Plug in the memory card only when the camera is turned OFF.
After WiFi connection & setup through APP, camera can still work according to the settings even disconnected to WiFi. -
Cloud storage: Email us to get FREE cloud storage.
-
This camera is designed for indoor home security.
No waterproof. The ultraviolet light from daylight might cause the dark color become purple.
Free APP Download
Scan the QR code to download APP. Or search “UBox” in APP store.
Doesn’t support computer (PC) software.
APP Account
After download the APP, please register for your own UBox account.
Recommend to use your frequently used email for better account security and
customer service.
Buttons and card slots
Indicator Light
| Blue light flashing | Ready, for QR code scanning |
|---|---|
| Blue light solid on | Already connected |
toWiF1
Blue light & red light both on| Resetting
Green light on| Charging
Green light off| Not charging or fully charged
WiFi Connection
Instruction videos, see the last page.
-
1. Click “Add a Device”.
-
“Setup WiFi Device”.
-
Turn on your camera. Wait for the blue light flashing. Click “Yes” to move on.
-
Set a name for your new camera and go “Next”.
Note: If blue light not flashing, please press reset button at the back of camera for 3 seconds to reset it.
-
Input the WiFi name & password. The same WiFi your phone connected to.
-
Use the camera lens to scan the QR code on your phone. And wait for the APP to finish the connection.
Note: 5GHz WiFi not supported.
Installation
The 3M tape on the back of the holder is not strong enough to keep the camera
from failing on rough walls, wooden surface and windows.
If you already found a good spot for your camera, please use the screws in the
box to mount your camera tightly.
You can take the camera out of the holder when it needs a charge.
Device list interface
In this page, you can see all the devices you own.
You can see the live view of your camera, watch playback of the recorded motion detection videos and make important settings.
Some important settings
Motion detection: In “Detection sensitivity”.
If turned on, camera will record when detecting any motion.
Motion detection schedule: In “Arming setting “. Setup a schedule to turn on
motion detection.
Video length: In “Sleep delay”. Add extra video length for every motion
detection video.
Set to “Always” for continuous video recording. Night vision: In “Scene mode”.
“Normal” for automatic night vision. “Night vision mode” for manual control in
the live view interface. (see Device interface)
www.javiscam.net
service@javis-cam.com
User guide videos
www.youtube.com/@JAVISCAM
eVatmaster Consulting GmbH Bettinastr.30 60325 Frankfurt am Main, Germany
EVATOSTCONSULTINGLTD Suite 11 First Floor ,Moy Road Business Centre, Taffs Well, Cardiff,Wales, CF15 ?QR
Manufacturer: Shenzhen Huang Wei Technology Co.,Ltd Add res s : 401,2105 Longgang Avenue, Henggang Street, Longgang District, Shenzhen city, Guangdong Province, China