MCT IPW611 Wireless Extender for USB Cameras or Microphones or Speakers Installation Guide

June 9, 2024
MCT

MCT IPW611 Wireless Extender for USB Cameras or Microphones or Speakers

Hardware

TX ( Transmitter IO Ports )

Device priority : 3.5mm Speaker > USB™ Speaker/Microphone > USB™ Camera with Speaker/Microphone

RX ( Receiver )

Available USB-C® or USB™ Type-A port

LED indicator
  • Red: Power on
  • Orange: Waiting to connect
  • Orange flashing light : TX / RX pairing
  • Green: TX / RX connected, and TX USB™ camera is enabled
Application
  • Note: Image quality may vary depending on environment. Solid and nonporous materials such as steel, concrete, brick and glass (varies depending on coating and thickness) may cause shorter viewing distance or loss of signal.

Hardware Installation

Step 1. Connect the power adapter to the TX USB-C® power in and check that the power LED lights are red, indicating that the device is turned on.
Step 2. Connect your USB™ camera or USB™ speaker/microphone to the TX device’s corresponding USB™ ports. A speaker can also be connected to the 3.5mm audio out port (Optional).
Step 3. Connect the RX device to your laptop’s USB™ port and ensure that the power LED lights are red (Power on).
Step 4. If the TX and RX device are paired and the camera is plugged into the TX device, the LED lights on the TX and RX devices will turn green.

*Kindly suggest that when you hook and fasten the transmitter, the height of the transmitter should not exceed 2 meters.

Receiver OSD (on-screen display) status

Open a camera app (such as Zoom™, Microsoft Teams™, or Slack™) and check to see if you can see the OSD within the app.

*Note: If you have multiple cameras you may need to switch cameras within the camera application you are using. If you are unsure of how to switch cameras within your camera application please reach out to your application’s support team for assistance.

Startup screen
No USB™ camera connected:

If the TX and RX devices are connected, but the camera connected to the TX device is not enabled, the TX and RX LED will turn orange. Make sure that the USB™ camera is enabled or is currently selected within your camera application.

Retry connecting:

If the LED light on the RX device is red, and the LED light on the TX device is turned off, make sure that the TX device’s USB-C® power is connected.

If the RX and TX devices are both showing a red light, make sure that the RX and TX devices are within range of each other.

REGULATORY COMPLIANCE

  • Regulatory Compliance : FCC / CE / BSMI / NCC

FCC ID : 2ANKPIPW611TX
FCC ID : 2ANKPIPW611RX

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC ID: 2ANKPIPW611TX
FCC ID: 2ANKPIPW611RX

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

You are cautioned that any changes or modifications to this product not explicitly approved by the manufacturer in writing could void the user’s authority to operate the equipment and any assurances of Safety or performance, and could result in violation of Part 15 of the FCC Rules.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

RF Frequency Requirements:

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

FCC

This equipment has been tested and found to comply with FCC Part 15, Subpart B, ANSI C63.4-2014,
January 2016 (Updated April 2019).

Operation is subject to the following two conditions:

  • This device may not cause harmful interference
  • This device must accept any interference, including interference that may cause undesired operation of the device.
RCM

This equipment is in compliance with the requirements of the following regulations: Australian/New Zealand Standard(s): AS/NZS CISPR 32:2015 Class B

VCCI / TELEC

This equipment is in compliance with the requirements of the following regulations: CISPR 32 © IEC: 2016 Class B

BSMI & NCC

This equipment is in compliance with the requirements of the following regulations: CNS13438 and NCC regulations: LP0002

USB-C and USB are trademarks of USB Implementers Forum, Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. DisplayPort is a trademark of Video Electronics Standards Association, its affiliates or its respective owners, registered or used in many jurisdictions worldwide. HDMI is a trademark of HDMI Licensing Administrator, Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. SD and microSD are trademarks of SD-3, LLC, its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Microsoft Teams is a trademark of Microsoft Corp., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Zoom is a trademark of Zoom Video Communications, Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Slack is a trademark of Slack Technologies, Inc., its affiliates or its respective owners, registered or used in many jurisdictions worldwide. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and/or names or their products and are the property of their respective owners. All company, product and service names used are for identification purposes only. Use of these names, logos, and brands does not imply endorsement. We disclaim any interest in the marks of others.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals