BURG WACHTER FAVOR S3E Safe Locker User Manual

User manual

Structure

| A. Delete button
B. Green LED „Opening readiness“
C. Yellow LED „Button confirmation“
D. Red LED „Refused entry / Blocking time / Battery“
E. Enter button
---|---

Dear customer,
Thank you for deciding for a safe from the Favor series manufactured by BURG- WÄCHTER. This safe provides a basic protection for objects of value.
Important: Please read the entire User Manual before you start programming.
We hope you enjoy your new safe.
Your BURG-WÄCHTER KG

Important notes

Please take care that the code do not fall into the wrong hands. Therefore, store it at a safe location so that it can only be accessed by authorised persons. In case you loose a code, the lock must be converted to a new code.

• Beside the electronic lock, this safe has an integrated mechanical emergency lock mechanism.
• The factory code must be set as soon as the safe is commissioned.
• Simple codes that are easy to guess (e. g. 1, 2, 3, 4, 5, 6) must not be used.
• Personal data (e. g. birthday) or other data that may be concluded with knowledge of the safe owner must not be used as code.
• The emergency key must be stored in a secure and secret location.
  Attention: Any changes of the administrator code and of the user codes shall be made with the safe door opened! When the locking system has been reset to another code, this new code should be repeatedly used with the safe door opened.

Generally

When an action has been successfully performed, the green LED under the “Opening readiness” icon goes on when it is completed, the activation of the red LED under the “Refused entry / Blocking time / Battery” icon indicates that the action has failed. In such case the original settings are retained. A flashing yellow LED indicates entry using a button.

Technical data

humidity (nocondensing)

Signal tones

1 x Button pressed
2 x Code correct, start of programming
7 x Code incorrect

Commissioning / setting user code

Remove the screws of the battery compartment cover using the attached hex key (size 1.5) and move the cover with the Favor logo downwards. Then insert the emergency key into the lock and turn it as far as the stop counterclockwise. Turn the knob by a quarter clockwise and open the door.
Then insert the batteries from the safe (4 pcs, LR6 / AA / 1.5 / alkaline, Pay attention to the correct polarity) and screw the battery compartment cover back on. Press the red button on the inner side of the safe door (the yellow LED flashes twice together with 2 high signal tones). The yellow LED lights up during the programming process.
Enter the new opening code (3 to 8 digits) and press “Enter”. A successful code change is confirmed by 2 high tones together with the green LED flashing twice.

Change code

• Enter the valid opening code

• Press “Enter” and turn the knob by a quarter clockwise.

• Open the safe and wait until the green LED above the opening readiness icon turns off. Press the red button on the inner side of the safe door
  (the yellow LED flashes twice together with 2 high signal tones).

• The yellow LED lights up during the programming process. Enter the new opening code (3 to 8 digits) and press “Enter”. A successful code change is confirmed by 2 high tones together with the green LED flashing twice.

Opening using the opening code

• Enter the valid opening code
• Press “Enter” and turn the knob by a quarter clockwise.

Opening with the emergency lock

• Remove the screws of the battery compartment cover and move the battery compartment cover downwards.

• Remove the batteries.
  Then insert the emergency key into the lock and turn it as far as the stop counterclockwise.

• Turn the knob by a quarter clockwise and open the door.

Assembly instructions

The safe must be securely anchored for it to achieve its approved protection function. In order to ensure permanent fixing use anchor points as indicated.

Guarantee

BURG-WÄCHTER products comply with the technical standards in force at the time of production and adhere to our own quality standards.
The guarantee only covers defects which can be proved to have resulted from production or material defects at the time of purchase. The guarantee expires after two years; further claims are excluded.
A short description of any defects identified must be made in writing and the device returned to the place it was bought, together with the original packaging, code and emergency key. After the device has been tested, and within an appropriate period of time, the guarantor will decide whether or not to repair or exchange the item.
Any defects or damage which may have resulted from transport, inappropriate or improper use, wear and tear etc. are not included in the guarantee.
The battery is not included in the guarantee

Disposal

Dear Customer,
Please help us avoid unnecessary waste. Should you intend to dispose of this device at any time, please remember that many components of this device contain valuable materials, which can be recycled.
Please be aware that electrical and electronic equipment and batteries shall not be disposed of as household waste, but rather collected separately. Please obtain information on the collecting points for electrical waste from the responsible authority of you municipality.
BURG-WÄCHTER KG hereby declares that this device complies with Directive 2014/30/EU, (EMC) 2011/65/EU (RoHS) and (2014/35/EU).
The full text of the EU Declaration of Conformity can be found on www.burg.biz.
Subject to technical changes without notice. Errors excepted.

BURG-WÄCHTER KG
Altenhofer Weg 15 58300 Wetter Germany
www.burg.biz

BA Favor mlo/swi 04/2019

References

• BURG-WÄCHTER | BURG-GUARD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>