FORKWAY WR100STD Battery Watering Gun Instructions
- June 9, 2024
- FORKWAY
Table of Contents
FORKWAY WR100STD Battery Watering Gun
Product Information
The Standard Nozzle PRD# WR100STD is a Battery Watering Gun that comes equipped with a patented Posi-Stop Flow and Pressure Reducer Valve. This watering gun helps to fill batteries easily and efficiently without any spillage.
Product Usage Instructions
- Before using the Battery Watering Gun for the first time, prime the gun by spraying into a bucket or sink while gently shaking for 5 to 10 seconds to purge air from the system.
- Screw the white nozzle onto the threaded end of the handle.
- Attach the female end of the quick connect to a hose yielding a minimum of 15 PSI of water pressure.
- Attach the male end of the quick connect on the handle into the female end until it clicks.
- Insert the tip of the watering gun into the battery cell until the black depth stop contacts the top of the battery.
- Fully squeeze the handle. Do not partially squeeze the handle as this prevents the gun from shutting off.
- This Battery Watering Gun is equipped with a patented Posi-Stop Flow and Pressure Reducer Valve. When the water level inside your battery reaches the tip of the nozzle, the Posi-Stop Flow Reducer will make a noticeable click indicating to let go of the handle. When the handle is released, the water flow will stop completely.
- A slight tap on the edge of the cell opening will remove any water droplets from the tip of the gun.
- Move to next cell and repeat the process.
Note that this gun does not operate like a gas pump that shuts off automatically. A slight stream of water will still continue to flow from the end of the nozzle until the handle is released. This helps keep the watering gun primed for rapid filling of the next battery cell. The Posi-Stop Flow and Pressure Reducer Valve restricts the water flow to about 95%. After you feel or hear the click, release the handle and the water will stop completely. For best results, keep the tip of the gun perpendicular to the battery cell.
IMPORTANT – Before using your Battery Watering Gun for the first time, please spray into a bucket or sink while gently shaking for 5 to 10 seconds in order to prime the gun and purge air from the system. This helps ensure the watering gun resets appropriately for use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>