Puidselly ABP-1508 Smart Sides Wearable Breast Pump User Manual

Puidselly ABP-1508 Smart Sides Wearable Breast Pump

Product Information

The product is a breast pump that has four modes: single-side stimulating, single-side expressing, double sides stimulating, and double sides expressing. It has a power button, level adjustment buttons, and an expression time indicator. The device automatically turns off after 30 minutes of use and has a display that shows the time elapsed during expressing mode.

Product Usage Instructions

1. Wash your hands and clean your breasts with a warm towel before pumping.
2. Short press the power button A to turn on the device.
3. Short press button A to switch between stimulating and expressing modes.
4. Quickly double-press button A to switch between single side and double sides mode.
5. Long press button A to turn off the device.
6. Use button B to increase the suction level and button C to decrease it.
7. The device will enter stimulation mode first and automatically switch to expression mode after two minutes of stimulation.
8. The suction level can be adjusted during use using buttons B and C.
9. The device automatically turns off after 30 minutes of use.
10. I the expressing time indicator I turn on during expressing mode and displays the time elapsed during expression mode.

Note:
If the device turns off due to insufficient power, it can only be turned on again after charging. There are nine levels available for each mode.

Breast pump system parts

1. Type-C charging cable (Adaptor not included)*1
2. Pump*l
3. Sucking valve*2
4. Duck bill valve*2
5. Breast Shield 2Bmm*2
6. Bottle 180ml*2
7. Suction cap*l
8. Tube*l

Specifications for all parts

How to clean

• Do not wash or disinfect in water.
• Wipe the surface with paper towel.
• When accidentally dropped into the water orother liquid residues, please be sure to suspend the use and contact the customer service.
• Hand or machine washable.
• It can be sterilized by steam, ultraviolet and boiling water.Yellowing caused by ultraviolet disinfection is a normal phenomenon.After the hot water boils, please turn off the heat source and wait for three minutes before disinfection.
• Allow parts to air dry.
• The accessories are natural consumables. In case of atomization, odor or damage, please update them in time.
• Silicone accessories are recommended to be soaked in hot water regularly and then cleaned, which can effectively remove the oil dirt on the surface.

Putting together your breast pump kit

All accessories must be installed well, otherwise the suction function will be affected and milk leakage will possibly occur.

LED display instructions

1. Before pumping, please wash your hands and it is recommended to wipe your bre asts withna warm towel.

2. This device provides 4 modes: Single side stimulating mode, Single side expressing mode, Double sides stimulating mode, Double sides expressing mode.

3. Short press the power button (A) to turn the device on; when the device is on, short press button (A) to switch to stimulating or expressing mode, quick double press button (A) to switch to single side or double sides mode, long press button (A) to turn off the device. (If the power is turned off due to insufficient power, it can be turned on only after charging) Altogether 1-9 levels for each 4 mode, and press (B) (Levels increase) or (C) (levels decrease) to adjust the suction value.

4. Whenever you press (A) (power button) to turn it on, the device will enter the stimulation mode first and automatically enter the expression mode after two minutes of stimulating. During use, the suction value can be adjusted by (B) (Levels increase) or (C) (levels decrease).

5. In order to take care of Mommy’s breasts, this product will turn off automatically and safely after 30 minutes use.

6. The Expressing time indicator (I)) button will only be on under the expressing mode. while in
   Expressing mode and there is no operation for 5 seconds, the double 8 display starts to show time:

7. In Expressing mode within 59 seconds, the (1) indicator OFF and the double 8 display shows in second.

8. In Expressing mode after 60 seconds, the (1) indicator ON and the double 8 display shows in minute (1-30 minutes).

Power description

1. The device contains 1200mAh lithium battery, which can store electricity and collect milk. One full charge takes about 3 hours.
2. When the storage capacity is lower than 30%, (H) (LED battery indicator) will display a flashing light, charging shall be started.
3. When charging, (H) (LED battery indicator) displays a flashing light; When full, the full charging indicator will be on.

Power supply description

1. Please use the plug with the specification recommended by the original supplier and the original charging cable for power supply.
2. After charging for about three hours, it can be fully charged and unplugged. It will then be powered by the included lithium battery.
3. The original charging cable can be used to connect the computer or mobile power supply for power supply.
4. The breast pump contains lithium battery. In order to maintain good power storage function, please avoid long-term over-charging.
5. Lithium battery is a natural consumable. With the increase of charging and use times, it is normal that the power storage function decreases gradually.

Usage tips

1. The size of the breast shield will not affect the amount of milk sucked, but will affect the comfort of use.
2. The breast shield should be aligned with the center of the breast (as shown in the left figure). Please avoid to make the nipple touch around the breast shield, otherwise you might feel stimulating friction pain.
3. If you feel any pain or discomfort, please turn off the power and reject the obstacles, and then start again with the first level of suction. If you still feel pain and discomfort, please stop using it immediately and consult your doctor before using it.
4. When the doctor determines that the size of the breast shield is inappropriate, other sizes can be purchased separately.

How to pour out the breast milk

1. After milk collection, please pull out the pump first and face the breast shield upward to avoid breast milk overflow.
2. Please prepare the milk storage bottle and pour out the breast milk according to the correct milk pouring method shown below.

How to store breast milk

1. Considering the expansion of breast milk after freezing, it is recommended to store 3/4 of the capacity of the bottle before freezing breast milk.
2. It is recommended that each milk storage capacity is about 2 ~ 4 0z, which can not only thaw faster, but also prevent the waste caused by the baby’s inability to drink.
3. It is recommended to mark the date on the outside of each milk reservoir.
4. It is recommended that thawed breast milk be placed in cold storage for several hours or thawed with warm water at about 40 °C/ 104F. If thawed with warm water, gently shake the breast milk to prevent fat separation.
5. Thawed breast milk cannot be frozen again and must be drunk within 24 hours.

Specifications

• Product Name: Smart Double Sides Wearable Breast Pump
• Pump weight: 153g
• Power Consumption: 5W 1A
• Voltage: Input AC110-240V, 50-60Hz / Output DC5V, 1A
• Li Battery Capacity: 3.7V 1200mAh
• Suction: Maximum Suction 320mmhg 20%
• Material: PP+ Silicon
• Origin: Made in China

Warningg

1. After using this product, please be sure to turn off the device. Do not use non original parts.
2. This product is a personal hygiene product. Do not share it with others to avoid any health risks.
3. The breast pump contains lithium battery. In order to maintain good power storage function, please avoid long-term over-charging.
4. Keep the device from the heat source and water source. Do not irradiate the sun for a long time to avoid affecting the safety and function of the product.
5. Do not use this product lying or leaning back. Please stop using it when you are sleepy.
6. Do not put the breast pump into water or other liquid and do not use it when bathing.
7. Do not disassemble the product by yourself to avoid affecting your warranty rights.
8. In order to prolong the service life of the power cord, it is not recommended to store it by winding it.
9. Keep away from infants and young children when using to avoid swallowing accessories or parts.
10. This product cannot be used while charging, Please be sure to fully charge before using.

Warranty

1. The main engine is guaranteed for one year; The inner lithium battery is a natural consumable with a warranty period of three months. The other accessories are consumables, there is no warranty period.
2. During the warranty period, any failure or damage caused by failure to follow the operating instructions or improper use of human factors shall not be covered by the warranty.
3. All warranty liabilities or fault causes, defects, etc. shall be determined by the maintenance technician.
4. In case of over guaranteed products or man-made damages, the maintenance technician will take the initiative to notify the customer if any maintenance costs are incurred after inspection.
5. The troubleshooting guide is as follows. If you have any other questions, please contact the original purchasing customer service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>