Digi-Pas DW-1500XY 2-Axis Machinist Digital Level User Guide
- June 9, 2024
- Digi-Pas
Table of Contents
DW-1500XY 2-Axis Machinist Digital Level
User Guide
Getting Started
First, you are required to download Digi-Pas® Smart Levels App from Google
Play Store or Apple App Store to your smartphone/ tablet. Then, use Bluetooth
to link with Digital Level to initialize the levelling instrument.
For details instruction manual please refer to our websites:
https://www.digipas.com/support/catalogue.php
STEP 1
Download App
A. Launch App Store on your Apple or Android® smartphone/tablet
B: Search for: “Digipas Smart Levels” or Scan below QR code to Install
| Scan QR Code for Android App | Scan QR Code for iOS App |
|---|---|
| https://play.google.com/store/apps/details?id=com.digipas.digipaslevelconsolidated |
https://apps.apple.com/us/app/digipas-smart-levels/id1483155652
STEP 2
Install Battery
A. Loosen screw by turning anti-clockwise direction using Philips screwdriver
B. Pull out battery cap
C. Insert two (2) 1.5V AA batteries follow polarity direction as indicated
above.
Caution:
Please ensure batteries are inserted in correct polarity direction for device
to work.
STEP 3
Pairing
A. Press & hold Power button to power on the digital level. The blinking “BT”
indicate the device is waiting to be paired & initialized.
B. On your smartphone or tablet, launch Digi-Pas app
C. Follow steps displayed on your smartphone or tablet
Note: device initialization only appear on the first time new product
pairing only.
Warranty
Digi-Pas® Digital level is warranted to the original purchaser to be free from
defects in workmanship and material. DIGIPAS TECHNOLOGIES INC will, at its
option, repair or replace any detective part which may malfunction under
normal and proper use within a warranty period of 1 (one) year from the date
of shipment. This one year warranty clause is NOT applicable to European Union
(EU) member states. Purchases made in EU member states will be covered by the
existing consumer laws across the European Union, which provide statutory
warranty rights in addition to the coverage of one year warranty period. The
foregoing warranty shall not apply to defects resulting from misuse, abuse or
transfer by the Buyer, Buyer-supplied software or interfacing, unauthorized
modification or operation outside of environmental specifications for the
product. DIGIPAS TECHNOLOGIES INC. does not warrant that the operation of the
instrument software, or firmware, will be uninterrupted or error free.
The exclusive remedy under any and all warrants and guarantees, expressed
herein, and we shall not be liable for damages from loss or delay of
equipments uses, consequential, or incidental damage. No other warranty is
expressed or implied.
DIGIPAS TECHNOLOGIES INC. specifically disclaims the implied warranties of
merchantability and fitness for a particular purpose.
Limitation of Liability
In no event shall DIGIPAS TECHNOLOGIES INC., (hereinafter, “the Company”) be liable to you or any third party for any indirect, special, incidental, exemplary or consequential damages of any kind resulting from any breach of warranty or from the performance or use of the product. This includes without limitation: property damage, loss of value of the product or any third party products that are used with the product, or loss of use of the product or any third party products that are used with the product, even if the Company has been advised of the possibility of such loss or damages. The Company’s total cumulative liability arising from or related to the product, whether in contract, tort (including negligence) or otherwise, shall not exceed the amount actually paid by you for the product. Some states and/or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. If any limitation of liability shall be deemed invalid by any applicable law, then the limitations of liability set forth above shall apply to the maximum extent permitted under applicable law.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Reorient or relocate the receiving antenna.
The radiated output power of this device meets the limits of FCC radio
frequency exposure limits.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance to this equipment would void the users’ authority
to operate this device.
FCC ID: 2AFP6-DGP21C
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>