REPEATER BUILDER STM32-DVM Bridgecom BCR Repeater User Guide
- June 9, 2024
- REPEATER BUILDER
Table of Contents
BUILDER STM32-DVM Bridgecom BCR Repeater
User Guide
Cable Information
STM32-
DVM| Signal| BCR| Notes
---|---|---|---
1| N/A| |
2| →→TX Audio (Flat / 9600 Baud) 4→→| 21|
3| ←← DVM Inhibit (Act. Low) EE←←| 17#| Active Low
4| →→ RSSI →→| 10#|
5| →→PTT→→| 20|
6| ←←RX Audio (Discriminator)←←| 8|
7| N/A| |
8| EE Ground 4| 25|
9| E -F12V 4| 1|
NOTES:
#optional connection
*Pin 1 can used to feed power to the STM32-DVM V3 ONLY if the optional 12v buck converter has been installed.
DO NOT use on pre-version 3 boards!
Documents / Resources
|
REPEATER BUILDER STM32-DVM Bridgecom BCR
Repeater
[pdf] User Guide
STM32-DVM Bridgecom BCR Repeater, STM32-DVM, Bridgecom BCR Repeater, BCR
Repeater, Repeater
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>