FASTCABLING 6610-15 8+8 Ports Managed Fiber Ethernet Switch Instruction Manual

: June 9, 2024
: FASTCABLING

Table of Contents

6610-15 8+8 Ports Managed Fiber Ethernet Switch
Product Information:
Product Usage Instructions:
Description
Typical Application
TECHNICAL SPECIFICATION
Software Information
Documents / Resources

6610-15 8+8 Ports Managed Fiber Ethernet Switch

Product Information:

The 6610-15 Managed Fiber Ethernet Switch is designed to provide high-speed network connectivity with long-distance fiber for various IP devices. It has 8 10/100/1000 Mbps ports, 8 1 Gbps Combo SFP ports, and 2 1 Gbps dedicated SFP ports. The switch also features a high switching capacity of 36Gbps and a forwarding rate of 26.78Mpps. It has a MAC address table with automatic study and automatic updates, supporting up to 8K addresses with jumbo frame packet buffer of 10000 bytes. The switch supports web UI, console, telnet, and SSH management interfaces. The switch provides high-security with features like STP/MSTP/RSTP, PortFastRoot Guard BPDU Guard, SNMP Group, SNMP View, SNMP Trap, and ACL Configuration. It also supports QOS Configuration, load balance, static aggregation, LACP, MAC Binding, VLAN ARP, IGMP SNOOPING Configuration, ERPS Configuration, LLDP TLV, Error-Disable, and Onvif. The switch operates on a power supply of 100-240VAC/50-60 Hz with universal input AC/DC and internal power method. It has LEDs per port for easy identification and ESD/EMP Protection as well as Surge Protection. The switch has a compact design with dimensions of 28018044mm and weighs 1.61kg. It operates within a temperature range of -5°C to +45°C with operating humidity between 5% ~ 90% non- condensing. The switch is CE, FCC, IC IEEE (802.3az) certified and has an MTBF of >100000 hours.

Product Usage Instructions:

The 6610-15 Managed Fiber Ethernet Switch can be used in various settings like Retail Convenience Store, Workshop, Logistics, Home, and others. To use the switch, follow the below steps:

Connect the power supply to the switch and plug it into an electrical outlet.
Connect the fiber cables to the switch ports based on the required network connectivity.
Connect the IP devices to the switch ports or the fiber cables as desired.
Access the management interface of the switch using web UI, console, telnet, or SSH.
Configure the system settings like Basic Information, System Status, User Management, SNTP configuration, Import/Export Configuration File, Firmware Upgrade, System Reboot/Reset as per requirements.
Configure the IP settings like IPV4/IPV6, DHCP Client as per requirements.
Configure the port settings like Basic Configuration, Port Statistic, IEEE802.3x Flow Control, Broadcast Storm Suppression, Port Rate Setting, Ports Protected, Port Aggregation, Ports Mirror, Ports isolation as per requirements.
Configure VLAN settings like MAC Binding VLAN ARP, VLAN Information, VLAN Configuration, VLAN Port Configuration, Voice VLAN QinQGuest-VLANGVRP, MVR as per requirements.
Configure STP settings like STP/MSTP/RSTP, PortFastRoot Guard BPDU Guard as per requirements.
Configure SNMP settings like SNMP Group, SNMP View, SNMP Trap as per requirements.
Configure QOS settings like QOS Scheduling, Queue mapping as per requirements.
Configure AAA settings like Tacacs+ Configuration, Radius Configuration, 802.1x Configuration, MAB as per requirements.
Configure IGMP SNOOPING settings like IGMP SNOOPING Configuration, Multicast Group, IGMP IGMP Snooping VLAN as per requirements.
Configure ERPS settings like ERPS Configuration, ERPS mode, ERPS role as per requirements.
Configure LLDP settings like LLDP TLV as per requirements.
Configure Error-Disable settings like Error-Disable, Loopback-Detection as per requirements.
Configure Onvif settings like Onvif Detect, Onvif NLM as per requirements.
Configure POE settings like POE Global configuration, POE Port Configuration, PD watchdog as per requirements.
Use the Diagnosis Tool for Ping/Ping6, Traceroute/Traceroute6, cable diagnosis as required.
Manage the Log management settings like Log, Debug information as required.

Description

Managed Fiber Ethernet Switch enables installers to obtain long distance fiber with high speed network for installing various IP devices. A comprehensive device features gigabit network speed, gigabit uplink speed, high security, flexibility on application and installation, allow remote management and improve efficiency for the evolving business needs.

Typical Application

Retail
Convenience Store
Workshop
Logistics
Home and others

TECHNICAL SPECIFICATION

Dimensions: 28018044mm
Weight: 1.61kg
Networking Interfaces: (8) 10/100/1000 Mbps Ports (8) 1 Gbps Combo SFP Ports (2) 1 Gbps dedicated SFP Ports (1) 100Mbps Console Port
Management Interface: Web UI, Console, Telnet, SSH
Switching Capacity: 36Gbps
Forwarding Rate: 26.78Mpps
MAC Address Table: 8K，Automatic study, automatic updates
Jumbo frame: 10000 Bytes
Packet buffer: 4.1M bit
Power Method : 100-240VAC/50-60 Hz, Universal Input
Power Supply: AC/DC, Internal
LEDs Per Port: PWR, LNK/ACT, SYS
ESD/EMP Protection :Air: ± 8 kV, Contact: ± 6 kV
Surge Protection: Different mode ±2 kv, Common mode ±4 kv
Operating Temperature: 0°C ~ 40 °C
Operating Humidity: 10% ~ 90% non-condensing
Operating Humidity: 10% ~ 90% non-condensing
Storage Humidity: 5% ~ 90% non-condensing
Cooling: one fans
Certifications: CE, FCC, IC
Engery Saving: IEEE (802.3az)
MTBF: >100000 hour

Software Information

System settings: Basic Information, System Status, User Management, SNTP configuration, Import/Export Configuration File, Firmware Upgrade, System Reboot/Reset
IP Config: IPV4/IPV6 DHCP Client
Port Configuration: Basic Configuration, Port Statistic, IEEE802.3x Flow Control, Broadcast Storm Suppression, Port Rate Setting, Ports Protected, Port Aggregation, Ports Mirror, Ports isolation
Port Aggregation: Load balance, static aggregation, LACP
MAC: Binding Static Binding, Dynamic Binding, Auto Binding, MAC Auto Filter
VLAN: VLAN Information, VLAN Configuration, VLAN Port Configuration, Voice VLAN， QinQ，Guest-VLAN，GVRP, MVR
ARP: IP Source Guard, ARP Check, Gratuitous-arp, ARP defense, DAI,
DHCP: IPV4/IPV6 DHCP Snooping, DHCP Server, DHCP Relay
STP: STP/MSTP/RSTP, PortFast，Root Guard， BPDU Guard
SNMP: SNMP Group, SNMP View, SNMP Trap
RMON: ROM (1,2,3,9)
ACL Configuration: Standard ACL, IPv6 ACL, ACL Extension, MAC ACL, Time Range ACL
QOS Configuration: QOS Scheduling, Queue mapping
AAA Configuration: Tacacs+ Configuration, Radius Configuration, 802.1x Configuration, MAB
IGMP SNOOPING Configuration: IGMP SNOOPING Configuration, Multicast Group, IGMP IGMP Snooping VLAN
ERPS: ERPS Configuration, ERPS mode, ERPS role
LLDP: LLDP TLV,
Error-Disable: Error-Disable, Loopback-Detection
Onvif: Onvif Detect, Onvif NLM
POE Configuration: POE Global configuration, POE Port Configuration, PD watchdog
Diagnosis Tool: Ping/Ping6, Traceroute/Traceroute6, cable diagnosis
Log management: Log, Debug information

Golbong Technologies | Data subject to change without notice Cur: en-Us, V1, 7 July 2018

Documents / Resources

| FASTCABLING 6610-15 8+8 Ports Managed Fiber Ethernet Switch [pdf] Instruction Manual
6610-15 8 8 Ports Managed Fiber Ethernet Switch, 6610-15, 8 8 Ports Managed Fiber Ethernet Switch, Managed Fiber Ethernet Switch, Fiber Ethernet Switch, Ethernet Switch, Switch
---|---