amazon G2R8WD Echo Auto Audio Accessory User Manual

amazon G2R8WD Echo Auto Audio Accessory

Product Specifications

1. Product Description: Audio accessory
2. Model Numbers: G2R8WD
3. Electrical Rating: [5.0 V] DC Symbol = [2.0 A]
4. Operating temperature: -20°C to 55°C
5. Connectivity: BT4.2/BLE

STARTING THE DEVICE

1. Connect the device’s USB A output to the in-box power adapter’s USB A input, with the adapter plugged in to the vehicle’s 12V or 24V output.
2. Use the in box 3.5mm Auxiliary cable to connect to the vehicle’s head unit/entertainment console (optional).
3. Once, the car is turned ON, the device will get powered and you will see LED bar turning ON.

CONNECTING AND MOUNTING THE DEVICE

1. Pair the device to your phone by following device prompts on your phone’s app using Bluetooth.
2. Once connected, your device is ready to use.
3. Mount the device on your car’s dashboard using the provided mounting adhesive.

STORING THE DEVICE

1. If you want to store the device, unplug the cables and remove the device from dash mount.
2. If the car is going to be parked for extended periods, then it is recommended you unplug the in-car power adapter.

Safety and Compliance Information

Using Your Device Around Other Electronic Devices

FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.

• The device should be positioned in a way that provides proper ventilation. For example, do not cover the apparatus with items such as newspapers, tablecloths or curtains and do not use this equipment on soft support such as bedding, blankets, etc.

• The apparatus shall not be exposed to dropping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Do not expose your device or power cord to liquids. If your device or power cord gets wet, carefully unplug all cables without getting your hands wet and wait for the device and power cord to dry completely before plugging them in again. Do not attempt to dry your device or power cord with an external heat source, such as a microwave oven or a hair dryer. If the device or power cord appears damaged, discontinue use immediately. Use only included accessories to power your device. To avoid risk of electric shock, do not touch your device or any connected wires during a lightning storm.

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. If your device gets wet, information for care instructions can be found in the app under Help & Feedback > Legal & Compliance.

• The device is capable of playing at high volume, which could damage the hearing of the user. To prevent possible hearing damage, avoid listening at high volume for long periods.
  Your device does not have an on/off button. If you wish to stop power from flowing into your device, unplug the power cord.

• Do not expose your device to extreme heat or cold. Use your device in a location where temperatures remain within the device’s operating temperature range set forth in this guide.

• The Device, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment.

• External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.

• While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.

• There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.

FCC Compliance Information

Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at
transition.fcc.gov/oet/ea/fccid.

Information Regarding Exposure to Radio Frequency Energy

The output power of the radio technology used in the Device is below the radio frequency exposure limits set by the FCC. This device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

FOR CUSTOMERS IN CANADA
Innovation, Science and Economic Development Canada (ISED) Compliance
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)

RF Exposure Information (MPE)
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.

Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Products in accordance with your local laws and regulations. For information about recycling the Products, go to www.amazon.com/devicesupport.

References

• Amazon Digital Services and Device Support - Amazon Customer Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>