EasySMX EHP-61D Wireless Headset User Manual

: June 9, 2024
: EasySMX

Table of Contents

EasySMX EHP-61D Wireless Headset
Product Description
Button Function
Instructions
Specifications
Packing List
FCC STATEMENT
After-sale services
- Contact Information
EasySMX Co., Limited
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EasySMX EHP-61D Wireless Headset

Dear customer

Thank you for purchasing EasySMX product. Please read this user manual carefully and keep it for further reference.

Product Description

EHP-61D wireless headset support PC/ PS4/ PS5 Android IOS/ Switch cell phones, tablets, etc.

Product Diagram

EasySMX-EHP-61D-Wireless-Headset-FIG-1

Button Function

EasySMX-EHP-61D-Wireless-Headset-FIG-3

Instructions

The first connection, long press the headset power button for 3 seconds to turn on, the headset automatically search to find the device. Bluetooth and 2.4G search at the same time, any device can be paired. For Example, connect Bluetooth, open the Bluetooth device search pairing name EHP-61D for connection. For example, connected to 2.4G, directly inserted into the USB transmitter automatically pairing, no key switch operation.

2.4G USB Receiver Connection

Insert the headset transmitter into the device USB port, after power on the headset and the transmitter automatically pairing, the transmitter indicator flashes, after successful pairing, the headset indicates a blue light while slow flashing at the 5S interval.

Bluetooth Connection

Turn the headset on, open the Bluetooth device, search for the pairing name EHP-61D to connect.

Dual-Mode Switching

Any connection state, Disable mic button pressed 2 times in succession, Bluetooth and 2.4G mode switch.

Wired Connection

Through the special TypeC audio cable to connect the headset and 3.5 audio devices can be used.

Specifications

Operating Current: 25-65mA
Charging Current: <800mA
Battery Capacity: 1500mAh
Frequency Response: 20HZ-20kHZ
Impedance: 320
Power: 20mW
Receiving Sensitivity: -42+3dB
Transmission Distance: 10M

Packing List

1X C07 Headset
1X USB Receiver
1X USB-C Cable
1X Instruction Manual
1X After-Sales Card
1X Storage Bag

FCC STATEMENT

S 15.19 Labelling requirements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation

15.21 Changes or modification warning

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

15.105 Information to the user

Note: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction According to §15.247()0) and §1.1307(6)(0), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB 447498 (2)a).

After-sale services

Read the following information to get better services.

Dear customers

Thank you for purchasing EasySMX products. If you have any problems or suggestions, please contact us quickly and we will answer you as soon as possible.