ROKiT solos Smart Glasses User Manual
- June 9, 2024
- Rokit
Table of Contents
ROKiT solos Smart Glasses
STATEMENT
Thank you for purchasing ROKiT EYE Q.
‘Art of Craft and Technology, in the service of a better life’ is our value.
We develop products and services to improve customers personal health, quality
of live, and enhance their daily life experience.
Model No.
IC01
Classic Design – Solos
Open Ear Smart Glasses.
For further information about
Premium Collection – Concerto & Limited Edition – Fantasia. Please visit
www.rokitlife.com to find more.
WHAT’S IN THE BOX
CONTENTS
Confirm that the following parts are included:
NOTE If any part of the product is damaged, don’t use it. Please contact rokitsupport@aarcbrand.com
SWEAT AND WEATHER RESISTANCE
The frames are rated IPX4 water rasistant. Designed to be sweat and weather
resistant against drops of water but aren’t meant to be submerged under water.
CAUTIONS
- Do NOT swim or shower with the frames
- Do NOT submerge the frames
NOTE IPX4 is not a permanent condition, and resistance may decrease as a result of normal wear .
INSTRUCTIONS
BATTERY AND CHARGE
CHARGE THE FRAMES
- Align the pins on the charging cable with the charging ports on the left and right of the frame.
- Connect the other end to a USB charger (not provided)
NOTE
- Please turn off your audio glasses before charging.
- The frames don‘t play audio while charging.
- Don’t wear the frames while charging.
FRAMES STATUS
The frames status light is located on the inside of the left and right
temple.
BLUETOOTH CONNECTION STATUS
Shows the Bluetooth connection status of mobile devices
No light | Connected |
---|---|
Alternating red and green flashes | Ready to connect |
POWER
POWER ON
Long press the function button for 2 seconds to turn on the glasses, the
left and right temples turn on separately.
POWER OFF
Long press the function button for 5 seconds, and the Left and right
temples turn off simultaneously. After 5 minutes without a Bluetooth
connection, the audio glasses will automatically turn off.
BLUETOOTH CONNECTIONS
CONNECT USING THE BLUETOOTH MENU ON YOUR MOBILE DEVICE
NOTE:
- The Bluetooth feature is usually found in the Settings – Connections menu.
- You can connect and play audio from only one device at a time.
- The device must be within range (30 ft or 9 m) and powered on.
- When connecting other models of ROKiT EYE Q products, please ignore the previously connected Bluetooth first and then reconnect.
- With the frames powered on, enable the Bluetooth feature on your device.
- Select ROKiT Eye Q from the Bluetooth devices list and tap connect.
Use the function button to control media playback, phone calls, and voice control.
MEDIA PLAYBACK
Sound level can be increased or decreased using the volume controls on the
media device connected to the glasses.
Play/Pause | Press the button |
---|---|
Skip forward | Double-press the button |
Skip backward | Triple-press the button |
PHONE CALL
Answer/End a call | Press the button |
---|---|
Decline incoming call | Long press for 2 seconds |
ACCESS VOICE CONTROL
Long press for 2s and release the button after hearing a prompt tone of ’Di’
to turn on the voice assistant.
Click to exit voice assistant.
LOW LATENCY MODE
With the frame powered on, four clicks to enter low latency mode.
RESTORE FACTORY SETTINGS / CLEAR PAIRING RECORDS
With the frames powered off, press and hold the Function button for 8
seconds to clear the pairing records.
LOW BATTERY VOICE PROMPT
When the glasses’ batteries reach low power levels, a voice prompt will
warn the user every one minute.
Technical Specifications
Frame Material | TR90 |
---|---|
Lens | TAC |
Bluetooth | BLE5.0 |
Speaker Driver | 16mm |
Battery Capacity | 90mAh 2 |
Play Time@100% Volume | Up to 5 Hours |
Play Time@60% Volume | Up to 8 Hours |
Charging Time | 90min |
Charging Voltage / Current | 5V / 160mA |
Product Weight | 44.8g |
Waterproof Level | IPX4 |
Working Temperature | 0-45(°C) |
Precautions for use
Sunglasses (nonprescription) are devices that consist of spectacle frames or clips with absorbing, reflective, tinted, polarizing, or photosensitized lenses intended to be worn by a person to protect the eyes from bright sunlight but not to provide refractive corrections.
Refer to instructions for use
Please read and keep all safety, security, and use instructions.
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Note and consider all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
WARNINGS/CAUTIONS
- Do NOT use the frames at a high volume for any extended period.
- To avoid hearing damage, use your frames at a comfortable, moderate volume level.
- Turn the volume down on your device before wearing the frames or placing them near your ears, then turn the volume up gradually until you reach a comfortable listening level.
- Use caution while driving and follow applicable laws regarding the use of a mobile phone.
- Focus on your safety and that of others if you use the frames while engaging in any activity requiring your attention, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc. Remove the frames or adjust your volume to ensure you can hear surrounding sounds, including alarms and warning signals.
- Do NOT use the frames if they emit any loud unusual noise. If this happens, turn the frames off and contact Rokit life customer service. Email rokitsupport@aarcbrand.com
- Do NOT submerge or expose the frames for the extended period to water, or wear while participating in water sports, e.g., swimming, waterskiing, surfing, etc.
- Remove frames immediately if you experience a warming sensation or loss of audio.
- To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquid, or moisture.
- Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product.
- Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
- Do NOT make unauthorized alterations to this product.
- Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like.).
- Do NOT wear the frames while charging.
- After each use, wipe both sides of the lenses and all parts of the frame with the cloth provided or a dry cloth.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>