buy2fix 950g Flame Aroma Humidifier User Manual

June 9, 2024
buy2fix

buy2fix 950g Flame Aroma Humidifier User Manual
buy2fix 950g Flame Aroma Humidifier

Getting To know Your Humidifer

Getting To know Your Humidifer

  1. Clock Setting Indicator
  2. PM Indicator (For 12H mode)
  3. Alarm Setting Indicator
  4. .Alarm Activated Indicator

Getting To know Your Humidifer

Getting Started

  1. Remove all packaging. Choose a solid, flat surface to place the humidifier.Place it at least 6 in / 15 cm away from any walls. The surface surrounding must be water-resistant
  2. Make sure mist nozzle is directed away from walls, furnitures , beddings, and appliances.
  3. Connect the power adapter to the base.

Diffusing Set Up

  1. Remove the water tank cover. Fill the tank with cool water. DO NOT fill with warm or hot water, DO NOT add water above indicating line.
  2. Add 3-5 drops of Essential Oil (Optional)
  3. Tip: When you briefly press the Spray / Timing ” button to start the spray,Host default minimum spray mode,When you need more spray volume (you can press the Spray / Timing ” button for more than 3 seconds in any current timing mode, The buzzer “drip” twice lnthe middle fog mode, Press the “spray / timing” button again for more than 3 seconds, The buzzer will “drip” three times ,lndicates as entering the dense fog mode
  4.  Press “spray / timing” button to open spray mode 1H (hour)
  5. Press the secondary “spray / timing” button to open the spray mode 3H (hour)
  6. Short press the “spray / timing” button three times to open the spray mode 6H (hour)
  7. Short press the “spray / timing” button four times to open the spray mode ON (no timing / until automatic shutdown without water)
  8. Press the “spray / timing” for five times short to close the atomization

Ambient Light Set Up

  1.  Short Press the light button Colorful gradient is enabled by default colorful gradient cycle-for 7 color does not change color-green-highlighted green- red highlighted in red-blue-highlighted blue-shallow blue-highlighting shallow blue pink-highlight the pink-yellow, green-Gao Liangshan green-white- bright whiteout
  2. Can be used individually as a night light, if turned on while using diffusing function, light will automatically turn off and stop together with mist once water level is low.

Clock Time Set Up

  1. Press and Hold “Clock Setting” for 2 seconds , “Clock Setting Indicator” Starts to blink to enter 12/24H setting mode.
  2. Quick Press the “Clock Setting” button again to set up Hour, Press “Alarm Setting” button to select the correct Hour.
  3. Quick Press the “Clock Setting” button 3rd time to set up Minute, Press “Alarm Setting” button to select the correct Minute.
  4. .Quick Press the “Clock Setting” button 4th time to complete/confirm time set up.
  5. Do Note that product will exit setting mode when left idle for 10 seconds.

Alarm Set Up

  1. Press and Hold “Alarm Setting” for 2 seconds , enter alarm setting mode, “Hour” on display starts to blink
  2. Press “Clock Setting” button to select the correct Hour.
  3. Quick Press the “Alarm Setting” button again to set up Minute, Press “Clock Setting” button to select the correct Minute.
  4. Quick Press the “Alarm Setting” button 3rd time to complete Alarm set up.
  5. Press and Hold “Alarm Setting” to cancel alarm after entering alarm setting mode, “alarm activated indicator” goes off.

Bluetooth Speaker Set up

  1. Press and Hold “Play/Stop” Button for 2 seconds to enter Bluetooth pairing mode.
  2. Search for Device “H115A” in phone setting (keep your phone within 10m from speaker)
  3. .Choose song to play, short press “Play/Stop” button to stop or continue playing.
  4. Short press +/- to play next song or replay 5.Press and Hold +/- to increase or decrease volume.

Care and Matainenance

You should clean your humidifier every week and when you are ready to store/keep it.

  1. Unplug the humidifier and remove the power adapter from the base
  2. Remove the water tank from the base. Pour out all water in the tank from the MAX 400m1 direction
  3. Use a cloth to clean the surface of the humidifier and the internals of the wate tank, use a wet cotton bud to remove any remaining residue of essential oil on the diffusing nozzle.

Troubleshooting

Problem Possible Solution

Humidifier
doesn’t
turn on
| – Make sure the power adapter is correctly plugged into a working outlet. Make sure the power adapter is correctly plugged into the humidifier base.
No mist
comes
out
| – Fill up the water tank. Clean and remove any residue/blockage on the diffusing nozzle with a wet cotton bud
Little Mist| – There may be too much water in the water tank. Empty and Refill the water tank with less water.(below max 400m1 line) Clean and remove any residue/blockage on the diffusing nozzle with a wet cotton bud- Make sure the air inlet on the bottom of the base is not blocked.

Specifications

Product : Flame Aroma Humidifier
Dimensions : L285110135mm
Water Tank Capacity : 400ML
Rated Power : DC24V, 650mA
Weight : 950g

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction..

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals