Ultra-Max 724T Electric Griddles User Manual

ELECTRIC GRIDDLES
MODELS
724T, 736T, 748T, 760T, 772T
CHROME MODELS
724TCHS, 736TCHS, 748TCHS, 760TCHS, 772TCHS
Installation and Operation Instructions
2M-Z8514 REV G (05-22)

724T

MODELS 760T- & 772T- Not approved for Canada

ANSI/NSF 4

SAFETY SYMBOL

These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.

Model No………………………………..
Serial No…………………………………
Voltage……………………………………
Purchase Date………………………..

Authorized Service Agent Listing
Reference the listing provided with the unit or for an updated listing go to:
Website: www.star-mfg.com
E-mail customerservice@star-mfg.com

Service Help Desk
Business Hours: 8:00 am to 4:30 p.m. Central Standard Time
Telephone: 800-264-7827
Fax: 314-781-2714
E-mail customerservice@star-mfg.com
Website: www.star-mfg.com
Mailing Address: Star Manufacturing International Inc. 265 Hobson Street Smithville, TN 37166 U.S.A

CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. For equipment to be used by the general public, please contact the factory.

INSTALLATION

The griddles are equipped for the voltage indicated on the nameplate mounted on the front panel. They will operate on alternating current (AC) only.

WARNING
DO NOT CONNECT TO DIRECT CURRENT (DC).
The installation of the electric griddle should conform to the:
NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND ORDINANCES AND THE LOCAL ELECTRIC COMPANY RULES AND REGULATIONS
For your protection we recommend that a qualified electrician install this griddle. He should be familiar with electrical installations and all electric codes. Proper connections and power supply are essential for efficient performance. The external wiring should be in conduit or an approved type of flexible cable suitable for operation at the temperature indicated on the wiring diagram, and of a proper size to carry the load. The supply circuit should be properly fused and equipped with a means of disconnecting, as required by local electrical code. THE BODY OF THE GRIDDLE SHOULD BE GROUNDED (DO NOT GROUND TO A GAS SUPPLY LINE).

GENERAL OPERATING PROCEDURES

The Ultra-Max series electric griddles may be wired for operation in the field for either 1-phase or 3-phase power supplies by making line connections at the junction box(es) located at the rear of the unit. Models 724T-230/400V, 736T-230/400V & 748T-230/400V, should be wired for 3-phase power supply only. Two junction boxes are provided on the 760T & 772T for making line connections.

CONNECTING POWER SUPPLY
Detach cover on junction box at rear of unit. There is a terminal block for the supply connection in the junction box. Wires can be rerouted in the terminal block for 3phase hook-up. See wiring diagrams and model voltage on unit panel

LOCATING AND LEVELING THE UNIT
Do not install the unit closer than 1-inch from a side wall and/or closer than 1-inch from a rear wall.
Make sure the unit is properly ventilated. Level unit by adjusting the (4) feet which have an adjustment of 1-3/4” (43.75mm) for accurate leveling and perfect line-up with other Ultra-Max series units. After the griddle is in its final position, adjust the legs to create 1/8 inch slant from back to front. This will allow the grease to run into the grease gutter and provide proper heating for the elements.

SEASONING THE GRIDDLE HEATING SURFACE
Before initial use, clean the griddle surface thoroughly with hot soap and water. See Griddle care on page 4 for further information. After the griddle has been thoroughly cleaned, it should be seasoned to prevent food from sticking. Before using and after each thorough scouring, season the griddle heating surface in the following manner.

1. Remove any shipping material from the cooking surface and thouroughly clean the entire grill with hot soap and water.

2.  Turn temperature control dials to 350°F (177°C).

3. Using a clean cloth, not a spatula, brush a thin film of cooking oil over the griddle cooking surface.
   This film should remain on the hot griddle surface for half an hour.

4. Remove the excess oil and wipe clean.

5. Apply another film of cooking oil over the hot cooking area for another half hour and again remove excess oil and wipe clean. The griddle surface should now be ready for use.
   Even with careful seasoning, food may, to some extent, stick to the griddle cooking surface until the griddle plate is broken in.

TEMPERATURE CONTROL
The temperature controls are combination “ON/OFF” switches and thermostats. Turning the dial knob automatically maintains the selected heat range.
The Ultra-Max electric griddle line has one thermostat for every 12” (30cm) section of griddle that operates independently of one another. Each thermostat controls the section of the griddle above it and may be set at different temperatures as desired.

COOKING
Set the thermostat dial knob at the temperature desired. After a short pre- heating period, the thermostat will automatically maintain the selected temperature.

IDLING
During idle periods, to save on operating costs, lower the temperature setting of the thermostat to about 250°F (121°C). It is not necessary to maintain cooking temperature during idle periods, as the griddle can quickly be reheated to the desired temperature.

SIGNAL LIGHTS
Each thermostat has its own signal light which indicates when the unit’s control knob is in the on position. Cooking surface will be hot when the control knob is in this position.

GRIDDLE CARE (NON-CHOME SURFACES)
It takes very little time and effort to keep the griddle attractive and performing at top efficiency. If grease is permitted to accumulate, it will form a gummy cake and then carbonize into a hard substance which is extremely difficult to remove. To prevent this condition, the following suggestions for cleanliness should be followed:

1. After each use, scrape the griddle with a scraper or flexible spatula to remove excess grease and food. A waste drawer is provided for the drippings. If there is an accumulation of burned on grease and food, the griddle should be thoroughly scoured and re-seasoned. Use pumice or griddle stone while the griddle is warm. Do not use steel wool because of the danger of steel slivers getting into the food.
2. Daily , use a clean cloth and a good non-abrasive cleaner to clean the stainless steel body of the griddle. Wipe the polished front with a soft cloth.
3. At least once a day, remove the waste drawer and wash in the same way as an ordinary cooking utensil. The drawers are removed by pulling forward until they are released from their track.

GRIDDLE CARE (CHROME SURFACES)
(Chrome surface griddles are marked with “CHS” at the end of the model number designation on the nameplate.) It takes very little time and effort to keep this Industrial Chrome griddle surface sparkling clean and performing at top efficiency. DO NOT allow grease to accumulate as it will carbonize and become difficult to remove. To prevent this condition, the following cleaning suggestions should be followed:

1. Remove excess oil and food regularly with a 4” (100mm) wide razor sharp type scraper and wipe surface with a damp cloth if desired.
2. Following the scraping, for end of the day cleaning, a damp cloth and a non-silicated, nonabrasive, non-chlorinated cleaner such as Bon-Ami may be used to wipe surface clean, followed by wiping with clean wet cloth.
3. Follow steps 2 and 3 from Griddle Care (Non-Chrome Surfaces).

CAUTION
ON CROME SURFACES:

1. Never use pumice, griddle stones, or abrasives on the surface.
2. Never strike the griddle surface with a sharp instrument or spatula edge.
3. Never use steel wool.
4. Never use commercial liquid grill cleaner on the griddle surface.
5. Abusing the surface voids the warranty.

GREASE DRAWER
A grease drawer is located at the front can be removed for cleaning by pulling drawer forward. This drawer contains hot grease and should be checked and emptied when necessary or at least once a day.

CAUTION
EXERCISE EXTREME CARE IN HANDLING THE GREASE DRAWER CONTAINING HOT GREASE.

CAUTION
Never pour large amounts of water onto a hot griddle surface, the sudden temperature change generated by the steam can cause the surface to warp and possibly the thermal sensors in your ansul hood system to dischage. Instead follow the cleaning procedures in this manual.

MAINTENANCE AND REPAIRS **

**

Contact the factory, a service representative, or a local service company for service or required maintenance.

LIMITED EQUIPMENT WARRANTY

Star Manufacturing [as well as its subsidiaries] warrants to the original purchaser of new Star products to be free from defects in material or workmanship, under normal and proper use and maintenance service as specified by Star and upon proper installation and start-up in accordance with the instructions supplied with each Star unit. Star’s obligation under this warranty is limited to a period of one [1] year from the date of original installation, or eighteen [18] months from original invoice date, whichever occurs first. Defects that occur as a result of normal use, within the time period and limitations defined in this warranty, will at Star’s discretion have the parts replaced or repaired by Star or a Star-authorized service agency.

THIS WARRANTY IS SUBJECT TO ALL LISTED CONDITIONS
Repairs performed under this warranty are to be performed by a Star authorized service agency. Star will not be responsible for charges incurred or service performed by non-authorized repair agencies. In all cases, the nearest Star authorized service agency must be used. Star will be responsible for normal labor charges incurred in the repair or replacement of a warrantied product within 50 miles (80.5 km) of an authorized service agency. Time and expense charges for anything beyond that distance will be the responsibility of the owner. All labor will need to be performed during regular service hours. Any overtime premium will be charged to the owner. For all shipments outside the U.S.A. and Canada, please see the International Warranty for specific details. It is the responsibility of the owner to inspect and report any shipping damage claims, hidden or otherwise, promptly following delivery. No mileage or travel charges will be honored on any equipment that is deemed portable. In general, equipment with a cord and plug weighing less than 50 lb. (22.7 kg) is considered portable and should be taken or shipped to the closest authorized service agency, transportation prepaid.

CONTACT
Should you require any assistance regarding the operation or maintenance of any Star Manufacturing; phone, email or fax our service department. In all
correspondence provide the model number and serial number of the unit needing service; include the voltage or gas type.
Normal Business Hours: 8:00 a.m. to 4:30 p.m. Central
Telephone: 800-264-7827 Tech Service Option 2
Email: TechService@partstown.com
www.Star-Mfg.com

WARRANTY EXCLUSIONS
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.
Star’s sole obligation under this warranty is limited to either repair or replacement parts, subject to the additional limitations detailed below. This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty.

• Any product which has not been used, maintained, or installed in accordance with the directions published in the appropriate installation sheet and/or owner’s manual, including incorrect gas or electrical connection. Star is not liable for any unit which has been mishandled, abused, misapplied, subjected to harsh chemicals, modified by unauthorized personnel, damaged by flood, fire, or other acts of nature [or God], or which have an altered or missing serial number.
• Installation, labor, and job checkouts, calibration of heat controls, air and gas burner/bypass/pilot adjustments, gas or electrical system checks, voltage and phase conversions, cleaning of equipment, or seasoning of griddle surface.
• Replacement of fuses or resetting of circuit breakers, safety controls, or reset buttons.
• Replacement of broken or damaged glass components, quartz heating elements, and light bulbs.
• Labor charges for all removable and consumable parts in gas charbroilers and hotplates, including but not limited to burners, grates, and radiants.
• Any labor charges incurred by delays, waiting time, or operating restrictions that hinder a service technician’s ability to perform service.
• Replacement of parts that fail or are damaged due to normal wear or labor for replacement of parts that can be replaced during a daily cleaning routine, such as but not limited to silicone belts, PTFE non-stick sheets, control labels, knobs, bulbs, fuses, quartz heating elements, baskets, racks, and grease drawers.
• Any economic loss of business or profits.
• Non-OEM parts. Use of non-OEM parts without Star’s approval will void the warranty.
• Units exceeding one [1] year from original installation date, or more than eighteen [18] months from original purchase date, whichever comes first.

ADDITIONAL WARRANTIES

• Specific/chain-specific equipment may have additional and/or extended warranties.

years
Star Max Ⓡ fryers, griddles, charbroilers and hotplates| 2 years| 2 years
Staltek™️ roller grill coatings| 5 years|
Cast iron grates, burners and burner shields| 1 year
Original Star, Toastmaster or Holman parts sold to repair equipment| 90 days

The foregoing warranty is in lieu of any, and all other warranties expressed or implied and constitutes the entire warranty.
NOTE: Wattage is 4.35 kw per heated zone. See unit nameplate on front panel for correct supply voltage.

MODEL 724T AND 760T (1SIDE) MODEL 736T, 760T (1 SIDE), 772T (BOTH SIDES EACH)

MODEL 748T

NOTE: Wattage is 4.35 kw per heated zone. (1450 watts per-element) See unit nameplate for correct supply voltage.

MODEL 724T 230V 3 PHASE MODEL 736T 230V 3 PHASE MODEL 748T 230V 3 PHASE MODEL 760T 230/400V Y 3 PHASE

SOME ITEMS ARE INCLUDED FOR ILLUSTRATIVE PURPOSES ONLY AND IN CERTAIN INSTANCES MAY NOT BE AVAILABLE
MODEL 724T, 736T, 748T, 760T, 772T
STAR MANUFACTURING INTERNATIONAL, INC.
SK2122 REV. — 02/21/2005

PARTS LIST

MODEL 724T Ultra-Max Electric Griddles

Key
Number| Part
Number| Number
Per Unit| Description and Model Designation
---|---|---|---
1| G5-Z8491| 1| REAR PANEL| 724T
2| G5-824023| 1| JUNCTION BOX ASSY.| 724T
G5-Z10348| 1| ELECTRICAL BOX| 724T-230V
3| G5-Z8481| 1| JUNCTION BOX COVER| 724T
G5-Z10349| 1| ELECTRICAL BOX COVER| 724T-230V
4| 2E-Z8482| 1| TERMINAL BLOCK| 724T
2E-Z9565| 1| TERMINAL BLOCK 5 POS.| 724T-230V
5| 2E-Z8423| 1| GROUND LUG| 724T
6| G5-824020| 1| GRIDDLE PLATE ASSY.| 724T
6| G5-824024| 1| GRIDDLE PLATE ASSY. CHROME| 724T
7| G5-824021| 1| BODY ASSY.| 724T
8| 2E-Z8358| 1| 3/4” EMT CONNECTOR| 724T
9| 2E-Z8361| 1| 3/4” EMT TUBE – 22 3/4” L.| 724T
10| 2E-Z8356| 1| 3/4” PLASTIC BUSHING| 724T
11| G5-824022| 1| FRONT PANEL ASSY.| 724T
12| 2M-Z8473| 1| FRONT PANEL OVERLAY| 724T
13| 2P-Z8478| 2| HINGE ALL MODELS| ALL
14| 2E-30700-03| 2| 3 POLE CONTACTOR| 724T – 230V ONLY
15| 2T-Z5958| 2| THERMOSTAT| 724T
16| 2J-Y6690| 2| PILOT LIGHT| 724T
17| 2R-Z8490| 2| KNOB| 724T
19| 2N-Z8484| 2| HEATER ELEMENT 4350 W 208V| 724T (208V MODELS)
19| 2N-Z8485| 2| HEATER ELEMENT 4350 W 240V| 724T (240V MODELS)
20| 2N-Z8487| 6| HEATER ELEMENT 1450 W 230V| 724T (230V MODELS)
21| G5-Z8489| 12| HEATER ELEMENT CLAMP| 724T
22| G5-Z8488| 2| HEATER ELEMENT SHIELD| 724T
23| G5-824012| 1| CHUTE ASSY.| 724T
24| G5-Z8515| 1| DRAWER SLIDE| 724T
25| G5-824014| 1| GREASE DRAWER ASSY.| 724T
26| G5-Z8468| 2| BOTTOM PANEL| 724T
27| 2A-Z4614| 4| FOOT ALL MODELS| ALL

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER
Some items are included for illustrative purposes only and in certain instances may not be available.

MODEL 736T Ultra-Max Electric Griddles

Key Number| Part Number| Number
Per Unit| Description and Model Designation
---|---|---|---
1| G5-Z8492| 1| REAR PANEL| 736T
2| G5-824023| 1| JUNCTION BOX ASSY.| 736T
G5-Z10348| 1| ELECTRICAL BOX| 736T-230V
3| G5-Z8481| 1| JUNCTION BOX COVER| 736T
G5-Z10349| 1| ELECTRICAL BOX COVER| 736T-230V
4| 2E-Z8482| 1| TERMINAL BLOCK| 736T
2E-Z9565| 1| TERMINAL BLOCK 5 POS| 736T-230V
5| 2E-Z8423| 1| GROUND LUG| 736T
6| G5-836018| 1| GRIDDLE PLATE ASSY.| 736T
6| G5-836021| 1| GRIDDLE PLATE ASSY. CHROME| 736T
7| G5-836019| 1| BODY ASSY.| 736T
8| 2E-Z8358| 1| 3/4” EMT CONNECTOR| 736T
9| 2E-Z8361| 1| 3/4” EMT TUBE – 22 3/4” L.| 736T
10| 2E-Z8356| 1| 3/4” PLASTIC BUSHING| 736T
11| G5-836020| 1| FRONT PANEL ASSY.| 736T
12| 2M-Z8474| 1| FRONT PANEL OVERLAY| 736T
13| 2P-Z8478| 2| HINGE ALL MODELS| ALL
14| 2E-30700-03| 3| 3 POLE CONTACTOR| 736T – 230V ONLY
15| 2T-Z5958| 3| THERMOSTAT| 736T
16| 2J-Y6690| 3| PILOT LIGHT| 736T
17| 2R-Z8490| 3| KNOB| 736T
19| 2N-Z8484| 3| HEATER ELEMENT 4350 W 208V| 736T (208V MODELS)
19| 2N-Z8485| 3| HEATER ELEMENT 4350 W 240V| 736T (240V MODELS)
20| 2N-Z8487| 9| HEATER ELEMENT 1450 W 230V| 736T (230V MODELS)
21| G5-Z8489| 18| HEATER ELEMENT CLAMP| 736T
22| G5-Z8488| 3| HEATER ELEMENT SHIELD| 736T
23| G5-824012| 1| CHUTE ASSY.| 736T
24| G5-Z8515| 1| DRAWER SLIDE| 736T
25| G5-824014| 1| GREASE DRAWER ASSY.| 736T
26| G5-Z8468| 1| BOTTOM PANEL| 736T
26| G5-Z8469| 1| BOTTOM PANEL| 736T
27| 2A-Z4614| 4| FOOT ALL MODELS| ALL

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER
Some items are included for illustrative purposes only and in certain instances may not be available.

MODEL 748T Ultra-Max Electric Griddles

Key
Number| Part
Number| Number
Per Unit| Description and Model Designation
---|---|---|---
1| G5-Z8493| 1| REAR PANEL| 748T
2| G5-824023| 1| JUNCTION BOX ASSY.| 748T
G5-Z10348| 1| ELECTRICAL BOX| 748T-230V
3| G5-Z8481| 1| JUNCTION BOX COVER| 748T
G5-Z10349| 1| ELECTRICAL BOX COVER| 748T-230V
4| 2E-Z8482| 1| TERMINAL BLOCK| 748T
2E-Z9565| 1| TERMINAL BLOCK 5 POS| 748T-230V
5| 2E-Z8423| 1| GROUND LUG| 748T
6| G5-848018| 1| GRIDDLE PLATE ASSY.| 748T
6| G5-848021| 1| GRIDDLE PLATE ASSY. CHROME| 748T
7| G5-848019| 1| BODY ASSY.| 748T
8| 2E-Z8358| 1| 3/4” EMT CONNECTOR| 748T
9| 2E-Z8361| 1| 3/4” EMT TUBE – 22 3/4” L.| 748T
10| 2E-Z8356| 1| 3/4” PLASTIC BUSHING| 748T
11| G5-848020| 1| FRONT PANEL ASSY.| 748T
12| 2M-Z8475| 1| FRONT PANEL OVERLAY| 748T
13| 2P-Z8478| 2| HINGE ALL MODELS| ALL
14| 2E-30700-03| 4| 3 POLE CONTACTOR| 748T – 230V ONLY
15| 2T-Z5958| 4| THERMOSTAT| 748T
16| 2J-Y6690| 4| PILOT LIGHT| 748T
17| 2R-Z8490| 4| KNOB| 748T
19| 2N-Z8484| 4| HEATER ELEMENT 4350 W 208V| 748T (208V MODELS)
19| 2N-Z8485| 4| HEATER ELEMENT 4350 W 240V| 748T (240V MODELS)
20| 2N-Z8487| 12| HEATER ELEMENT 1450 W 230V| 748T (230V MODELS)
21| G5-Z8489| 24| HEATER ELEMENT CLAMP| 748T
22| G5-Z8488| 4| HEATER ELEMENT SHIELD| 748T
23| G5-824012| 1| CHUTE ASSY.| 748T
24| G5-Z8515| 1| DRAWER SLIDE| 748T
25| G5-824014| 1| GREASE DRAWER ASSY.| 748T
26| G5-Z8468| 1| BOTTOM PANEL| 748T
26| G5-Z8470| 1| BOTTOM PANEL| 748T
27| 2A-Z4614| 4| FOOT ALL MODELS| ALL

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER Some items are included for illustrative purposes only and in certain instances may not be available.
MODEL 760T Ultra-Max Electric Griddles

Key
Number| Part
Number| Number
Per Unit| Description and Model Designation
---|---|---|---
1| G5-Z8494| 1| REAR PANEL| 760T
2| G5-824023| 2| JUNCTION BOX ASSY.| 760T
3| G5-Z8481| 2| JUNCTION BOX COVER| 760T
4| 2E-Z8482| 2| TERMINAL BLOCK| 760T-208/240V
2E-Z9565| 1| TERMINAL BLOCK 5 POS #4| 760T-230V
5| 2E-Z8423| 2| GROUND LUG| 760T
6| G5-860018| 1| GRIDDLE PLATE ASSY.| 760T
6| G5-860021| 1| GRIDDLE PLATE ASSY. CHROME| 760T
7| G5-860019| 1| BODY ASSY.| 760T
G5-860012| 1| BODY ASSY| 760T-230V
8| 2E-Z8358| 2| 3/4” EMT CONNECTOR| 760T
9| 2E-Z8361| 2| 3/4” EMT TUBE – 22 3/4” L.| 760T
10| 2E-Z8356| 2| 3/4” PLASTIC BUSHING| 760T
11| G5-860020| 1| FRONT PANEL ASSY.| 760T
12| 2M-Z8476| 1| FRONT PANEL OVERLAY| 760T
13| 2P-Z8478| 2| HINGE ALL MODELS| ALL
14| 2E-30700-03| 5| CONTACTOR, 3PH SP7.10-CO| 760T-230V
15| 2T-Z5958| 5| THERMOSTAT| 760T
16| 2J-Y6690| 5| PILOT LIGHT| 760T
17| 2R-Z8490| 5| KNOB| 760T
19| 2N-Z8484| 5| HEATING ELEMENT 4350 W 208V| 760T (208V MODELS)
| 2N-Z8485| 5| HEATING ELEMENT 4350 W 240V| 760T (240V MODELS)
| 2N-Z8487| 15| HEATING ELEMENT 1450W 230V| 760T-230V
21| G5-Z8489| 30| HEATER ELEMENT CLAMP| 760T
22| G5-Z8488| 5| HEATER ELEMENT SHIELD| 760T
23| G5-824012| 2| CHUTE ASSY.| 760T
24| G5-Z8515| 2| DRAWER SLIDE| 760T
25| G5-824014| 2| GREASE DRAWER ASSY.| 760T
26| G5-Z8468| 2| BOTTOM PANEL| 760T
| G5-Z8471| 1| BOTTOM PANEL| 760T
27| 2A-Z4614| 4| FOOT ALL MODELS| ALL

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER
Some items are included for illustrative purposes only and in certain instances may not be available.

MODEL 772T Ultra-Max Electric Griddles

Key
Number| Part
Number| Number
Per Unit| Description and Model Designation
---|---|---|---
1| G5-Z8495| 1| REAR PANEL| 772T
2| G5-824023| 2| JUNCTION BOX ASSY.| 772T
3| G5-Z8481| 2| JUNCTION BOX COVER| 772T
4| 2E-Z8482| 2| TERMINAL BLOCK| 772T
5| 2E-Z8423| 2| GROUND LUG| 772T
6| G5-872018| 1| GRIDDLE PLATE ASSY.| 772T
6| G5-872021| 1| GRIDDLE PLATE ASSY. CHROME| 772T
7| G5-872019| 1| BODY ASSY.| 772T
8| 2E-Z8358| 2| 3/4” EMT CONNECTOR| 772T
9| 2E-Z8361| 2| 3/4” EMT TUBE – 22 3/4” L.| 772T
10| 2E-Z8356| 2| 3/4” PLASTIC BUSHING| 772T
11| G5-872020| 1| FRONT PANEL ASSY.| 772T
12| 2M-Z8477| 1| FRONT PANEL OVERLAY| 772T
13| 2P-Z8478| 2| HINGE ALL MODELS| ALL
15| 2T-Z5958| 6| THERMOSTAT| 772T
16| 2J-Y6690| 6| PILOT LIGHT| 772T
17| 2R-Z8490| 6| KNOB| 772T
19| 2N-Z8484| 6| HEATER ELEMENT 4350 W 208V| 772T (208V MODELS)
19| 2N-Z8485| 6| HEATER ELEMENT 4350 W 240V| 772T (240V MODELS)
21| G5-Z8489| 36| HEATER ELEMENT CLAMP| 772T
22| G5-Z8488| 6| HEATER ELEMENT SHIELD| 772T
23| G5-824012| 2| CHUTE ASSY.| 772T
24| G5-Z8515| 2| DRAWER SLIDE| 772T
25| G5-824014| 2| GREASE DRAWER ASSY.| 772T
26| G5-Z8468| 2| BOTTOM PANEL| 772T
26| G5-Z8472| 1| BOTTOM PANEL| 772T
27| 2A-Z4614| 4| FOOT ALL MODELS| ALL

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED INCLUDE MODEL AND SERIAL NUMBER
Some items are included for illustrative purposes only and in certain instances may not be available.

STAR MANUFACTURING INTERNATIONAL INC.
Star – Holman – Lang – Wells – Toastmaster
265 HOBSON ST. SMITHVILLE, TN 37166
800-264-7827
www.star-mfg.com

References

• Star - Innovation. Technology. Performance

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>