AeroCool Hive-G-BK-v2 Hive FRGB User Manual

User’s Manual

Front I/O Panel Cable Connection

Front Panel Connector
(Please refer to the motherboard’s manual for further instructions).

Note : Specifications may vary depending on your region. Contact your local retailer for more information.

Accessory Bag Contents

How to install Guide

1. Install Motherboard
   

2. Install PSU
   

3. Install Add-on Card
   

4. a) Install 3.5” HDD x 1

4 b) Install 3.5” HDD x 1

5. a) Install 2.5” SSD x 1
   
   5 b) Install 2.5” SSD x 2
   
   
   

Install Fan

I/O Panel

*LED Control Button Instructions
Press and hold LED control button for 2 sec to switch between MB and LED button control mode. To Turn off the LED, cycle through the LED modes.
Note : Specifications may vary depending on your region. Contact your local retailer for more information.
To learn more about how to connect your ARGB, please visit the product page at aerocool.io (for ARGB compatible versions)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>