AeroCool Baron AeroSuede Computer Chair User Manual
- June 9, 2024
- AeroCool
Table of Contents
AeroCool Baron AeroSuede Computer Chair
- Pictures are ror rereience only Chau pai1s, sc=ones and assembly s1eps are 1he same as lndiCated m the meooal
- To ease Installation, some parts of the chair (hfl lever. screws. washers) may be CC7’1ered with grease and od Please be sUfe to wash yola” hands tholoughly ofter haocJl!ng these parts to avoid occidentally staining lhe chair
Parts **
**
Plett theck arid ernuTe tihe follbwing purts are im the package If ary pat are mgsing or not inciuded, piease call the locai distributor for ssstunce Loeal distributor intoration cari be obtnned from Whete to Buy a berocoolio
Caution: Use protective gloves for this step. Work Gloves Required! Using bare hands may cause serious injury.
Assembly
-
A. Assemble the seat: Parts of Group-1
HOld the metal bracket down timly belore puing the iever. when ine lever is plled, d causes the metal bracxet to spring imto an upright position aimast immediotely
- Attach the backrest to the seat
- Fasten with screvs proided
- Fasten the protetive covers with provded screws
- Cover the screw holes with the screw capis
- Align the butery mechanism with the screw holes at the bottom af the seat as shown in image below
NOTE Place. the screws by hand before tightering them in a XPattem with the allen key
-
B. Assemble the wheel base: Parts of Group-2
- Push and twict the whels into the star bose
- Place the cyinder cover over the gas ift
- Place the chair face down and insent the star base into the buterfly mechanism.
A. Attach headrest cushion
- Put besdrest cushion on the backrest
B. Attach back cushion
- Slide the back cushion straps bebween the backrest and the seat and pull through from the back.
- Pull the straps through the shoulder belt hoies and click them nto place
Warranty
AeroCool will repair or replace, at no charge, any product(s) or part(s) of a product that proves defective because of improper material or workmanship, under normal use and maintenance.
Covered by Limited Warranty
This Limited Warranty covers any defects in material or workmanship under
normal use.
(Dysfunctional, deformed, broken, or damaged parts and leatherette
decomposition)
Not Covered by Limited Warranty
Problems not resulting from material or workmanship defects, eg. stains,
scratches, and other similar problems
(For such problems please request a replacement product within 7 days of
purchase)
How to Make a Warranty Claim
if your product is still under warranty and you would like to apply tor a
replacement, please return the product at your point of purchase or contact
our local agent Please prepare the following information before contacting
point of purchase or local agent
- Invoice/receipt.
- Photo of serial number starting with SN (can be found underneath product)
- Photos or video of product illustrating the problem/issue.
- Photo of complete product.
Warranty Period
- The warranty is effective from the date on which the invoice/ receipt was issued.
- If invoice/receipt cannot be provided, the warranty is valid from date of packaging (plus one month).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>