AeroCool Duke AeroSuede Computer Chair User Manual

June 9, 2024
AeroCool

AeroCool Duke AeroSuede Computer Chair

AeroCool Duke AeroSuede Computer Chair-fig1

  • Pictures are for reference only. Chair parts, accessories and assembly steps are the same as indicated in the manual.
  • To ease installation, some parts of the chair (lift, lever, screws, washers) may be covered with grease and oil. Please be sure to wash your hands thoroughly after handling these parts to avoid accidentaly staining the chair.

Chair Parts

Please check and ensure the following parts are in the package.
If any parts are missing or not included, please call the local distributor for assistance.
Local distributor information can be obtained from Where to Buy on aerocool.io

AeroCool Duke AeroSuede Computer Chair-fig2

Caution: Use protective gloves for this step.
Work Gloves Required! Using bare hands may cause serious injury.

Assemble the seat: Parts of Group-1

Hold the metal bracket down firmly before pulling the lever. When the lever is pulled, it causes the metal bracket to spring into an upright position almost immediately

AeroCool Duke AeroSuede Computer Chair-fig3

  1. Attach the backrest to the seat.
  2. Fasten with screws provided.

AeroCool Duke AeroSuede Computer Chair-fig4

  1. Fasten the protective covers with provided screws.
  2. Cover the screw holes with the screw caps.

AeroCool Duke AeroSuede Computer Chair-fig5

  1. Align the butterfly mechanism with the screw holes at the botom of the seat as shown in image below.
    NOTE: Place the screws by hand before tightening them in an X-Pattern with the allen key.

AeroCool Duke AeroSuede Computer Chair-fig7

Assemble the wheel base: Parts of Group-2

  1. Push and twist the wheels into the star base.
  2. Place the cylinder cover over the gas lift.

AeroCool Duke AeroSuede Computer Chair-fig8

  1. Place the chair face down and insert the star base into the butterfly mechanism.

AeroCool Duke AeroSuede Computer Chair-fig9

Attach headrest cushion

Put headrest cushion on the backrest.

Attach back cushion

  1. Slide the back cushion straps between the backrest and the seat and pull through from the back.
  2. Pull the straps through the shoulder belt holes and click them into place.

AeroCool Duke AeroSuede Computer Chair-fig11

Warranty

Please prepare the following information before contacting point of purchase or local agent.

  1. Invoice/receipt.
  2. Photo of serial number starting with SN (can be found underneath product).
  3. Photos or video of product illustrating the problem/issue.
  4. Photo of complete product.

Safety information

  1. Please sit in the center of the chair.

  2. Do NOT sit at the front edge of the chair.

  3. Do NOT stand on the chair.

AeroCool Duke AeroSuede Computer Chair-fig13

  1. Do NOT push the chair around while in use by another person.
  2. Do NOT push or pull down on the backrest while someone is reclined.

AeroCool Duke AeroSuede Computer Chair-fig14

aerocool.io

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals