GEEK DxRacer GC-D61-NWR-M3 DxRacer Drifting Computer Chair Instruction Manual

GEEK DxRacer GC-D61-NWR-M3 DxRacer Drifting Computer Chair Instruction Manual

Chair Accessories

Please check and ensure that the following things are in the package
Please call the local distributor for help if something is not included.

1. Chair Accessories
   

2. Other accessories
   

D Series Chair Quick Reference Guide

Included the following:

• Quick Reference
  P1e.asc Rad before using
  Tills file included Chair and product Specificaitions.

• After sales Service Guide
  warranty Card and Filled in simple card Included.

Assembly Instruction

1. Chair assembly
   

2. Attach plastic covers on base
   

3. Install ,he hydraulic unit and the plastic cover
   

4. Attach the backrest to the seat
   

5. Using the M8 Allen key remove the screws on the side of the backrest and use to attach the backrest to the seat
   (Screws come already fixed to the Sides of the backrest before delivery)
   

6. Fix the plastic covers onto the s ides of the backrest
   

7. Fix the control unit to the base of the seat (Screws have been fixed to the seat base at the factory prior to delivery.
   Please note the direction of the control unit should be on the right)
   

8. Insert the hydraulic unit  into  the opening of the control unit
   

Assembly Complete

Attach headrest cushion

Attach Headrest cushion Method one.

1. Put headrest cushion on the backrest

Attach Headrest cushion Method Two:

1. Insert the elastic through the plastic hole

2. Tighten the elastic using the butterfly clip

3. Complete the assembly as shown.

Attach lumber Cushion

1. Lead the  Plastic through the aperture as shown

2. Attach bell clips together

3. Adjust cushion as desired

Detailed Specification

• A. 545
• B. 270
• C. 70-100
• D. 320-370
• E. 525
• F. 370-450
• G. 90
• H. 790
• I. 270-350
• J. 550
• K. 350
  Size (mm)

Instruction During Use

1. Please move the product gently to avoid collision;

2. Please keep out of direct sunlight:

3. Please ensure the center of Gravity is on the hydraulic unit During Use.

4. Please watch your lingers when adjusting the backrest angle;

5. Please toggle the handle under your seat when adjusting the chair height.do not to press it down roughly;

6. Please lift the lever gently to raise or lower the height of the chair.
   Do not pull it roughly,

7. Do not place any heavy objects on the chair or armrests:

8. Plastic parts will split if chair is exposed to direct sunlight;

9. Please do not use abrasive cleaners on the chair.

10. We recommend you use Pledge to clean the chaff.

SUPPORT

This manual will explain the basic installation and operation of DXRACERI D Series Chair,
Link for videos online: littp://www,youtube.com,DXRacerEurope

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>