BASELAYR X1620 X-Series 16×20 3 LED 18 Inch T8 UV bulbs User Manual
- June 9, 2024
- BASELAYR
Table of Contents
X-SERIES 16×20
X1620
85-265VAC
3-LED 18″ T8 UV bulbs Wavelength: 395-405 nm
User Manual
Exposure instructions:
Print your artwork onto a clear transparency. Next, tape your transparency
containing your printed image on the outside of the screen so that the print
side is facing the screen. Place the screen on top of the glass so that the
squeegee side of the screen is facing up and the image is between the screen
mesh and the glass of the exposure unit. Place the foam pad that came with the
unit onto the screen mesh and apply about 30 lbs of weight to the top. This
will create positive contact between the screen, film and the glass helping to
prevent light from escaping around the image.
Turn on the unit and expose for the proper exposure time.
WARNING: Unit must be used in an area where others will not be exposed to the Open UV source. This Devices contain an intense UV light. DO NOT look directly into the UV light during operation. This can be harmful to the eyes even for brief periods of time. If viewing the UV light is necessary, Use UV filtered eye protection to avoid damage to your eyes. DO NOT remove bottom unless instructed by the manufactur-er, doing so will put you at risk of electric shock.
BASELAYR
3-year Electrical
Limited Warranty
WHAT IS COVERED?
Baselayr warrants any Baselayr Branded electronic equipment to be free from
defects in materials and workmanship for a period of 3 years from the original
date of purchase. This Warranty covers all Baselayr Branded/Manufactured
electrical equipment, excluding standard consumables, to be protected against
defects, damages, or malfunctions under normal use during the Warranty period.
If you discover a defect in a product covered by this warranty, we will
replace the part or repair the product, using new or refurbished components,
or if repair is not possible, replace the item, free of charge.
What does this Warranty not Cover?
Shipping or travel associated with a replacement or repair. Any problem that
is caused by abuse, misuse, or any “Act of God” circumstance (such as a flood)
is not covered. Also, replacement of any standard consumables that have a
natural wear and tear rate that will eventually result in that item needing to
be replaced is not covered.
This Warranty is non-transferable and can only be used by the original
purchaser.
If Standard Consumables are faulty or damaged upon receipt Baselayr will need
to be notified within the first 48 hours.
within the first 48 hours.
| ITEMS | COVERED | NOT COVERED |
|---|---|---|
| Light Table | Frame, Power chord & push button. | Light bulbs & ballasts |
| LED Units | LED power supplies, amber LED power supply, tablet charger | |
| power supply, tablet, relays, power chord, frame & lid frame. | Glass, fuses, |
neoprene, LED light, amber LEDs & shocks.
Drying Cab| All components covered.|
Fan Banks| All items covered ( fans, buttons, frame and power supplies ).|