LUMEN 880XHLC-G10 G10 LED Conversion Kit Instructions
- June 9, 2024
- LUMEN
Table of Contents
LUMEN 880XHLC-G10 G10 LED Conversion Kit
In the box:
- Two G10 LED conversion bulbs
- Allen key
- Adjustment instructions
Installation Instructions
STEP 1. Locate your headlamp.
STEP 2. If there is a cover on the back of the headlamp, remove the
cover.
STEP 3. Unplug the bulb in the headlamp, remove the bulb
STEP 4. Place the new G10 LED conversion bulb in the socket and make sure
it is secure.
STEP 5. While looking into the headlamp from the front of the vehicle,
ensure the bulb is in the correct orientation according to the adjustment
instructions included in the box.
STEP 6. If the front of the bulb is not in the correct position, you will
need to remove the bulb and adjust it according to the adjustment
instructions.
STEP 7. Once the bulb is properly situated, plug the bulb into the
headlight harness. Do not re install OEM dust covers, to allow for adequate
cooling of conversion bulbs.
STEP 8. Turn on your headlights and ensure proper operation of bulb on
low beam and high beam if applicable.
Check out other lights offered in our online store.