JBL CHARGE 5 Portable Waterproof Speaker User Guide
- June 9, 2024
- JBL
Table of Contents
JBL CHARGE 5 Portable Waterproof Speaker
WHAT’S IN THE BOX
Bluetooth pairing
Play
Partyboost
APP
Charging
POWERBANK
TECH SPEC
- Transducer: 52 mm x 90 mm woofer, 20 mm tweeter
- Rated output power: 30 W RMS for woofer, 10 W RMS for tweeter
- Frequency response: 60 Hz – 20 kHz
- Signal-to-noise ratio: > 80 dB
- Battery type: Li-ion polymer 27 Wh (equivalent to 3.6 V/ 7500 mAh)
- Battery charge time: 4 hours (5 V / 3 A)
- Music play time: up to 20 hours (dependent on volume level and audio content)
- USB port: Type C
- USB rating: 5 V / 2 A (maximum)
- Bluetooth® version: 5.1
- Bluetooth® profile: A2DP 1.3, AVRCP 1.6
- Bluetooth® transmitter frequency range: 2400 MHz – 2483.5 MHz
- Bluetooth® transmitter power: ≤ 10 dBm (EIRP)
- 2.4GHz SRD frequency range: 2407 MHz – 2475 MHz
- SRD transmitter power: < 11 dBm (EIRP)
- Dimensions (W x H x D): 223 x 96.5 x 94 mm / 8.7 x 3.76 x 3.67 inch
- Weight: 0.98 kg / 2.16 lbs
WARNING
To protect battery lifespan, fully charge at least once every 3 months.
Battery life will vary due to usage patterns and environmental conditions.
Do not expose the JBL Charge 5 to liquids without removing cable connection.
Do not expose JBL Charge 5 to water while charging. It may result in permanent
damage to the speaker or power source.
Chemicals, salt or “foreign particles” in your pool or the ocean can damage
the waterproof seals or harm the connector surface over time if not rinsed off
after use. After a liquid spill or rinse, do not charge your speaker until
it’s completely dry and clean. Charging when wet might damage your speaker.
When using an external adapter, the output voltage/current of the external
adapter should not exceed 5V/3A.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.