BRASS MONKEY GH-2046 Fridge-Freezer User Manual

(Optional Removable Battery)
18L
Fridge/ Freezer
GH-2046 / GH-2047
User Manual

FEATURES

• Suitable for storing 4 bottles of champagne upright
• Can be powered by an optional removable battery
• DC power connections
• High-efficiency DC compressor and conversion module
• Dual mode operation (Max & Economy)
• Digital temperature display with adjustable control
• 3 Year Warranty
• 3-stage low voltage battery protection
• USB port to charge USB devices
• APP control via Bluetooth

BOX CONTENTS

1 x Portable Fridge / Freezer
1 x 12 / 24 V Car Cigarette Power Lead

SPECIFICATIONS

Foam insulation

SAFETY

• The installation of DC power sources in a boat must be handled by a qualified electrician
• Make sure to connect power to the suitable voltage socket
• No electrical devices are to be used inside the product
• The product can be powered on only after being unpacked and put on a flat level surface for over 6 hours
• Fridge operating angle: The fridge can be operated indefinitely at up to 5 degrees, and can be operated at between 6 and 45 degrees for up to 30 mins.
• Product must be well ventilated. Ensure there is a minimum of 200mm clearance at the back, and 100mm around the sides
• The product should be in a well-ventilated space, away from heat sources. Try to avoid direct exposure to sunlight
• Keep product stable
• When there is water inside the fridge, do not turn the product upside down to empty. Dry the water with a soft cloth.
• Do not put metal in the air inlet vent, outlet vent, or gap
• Do not connect to other power except 12V / 24 V DC, or the 240V AC to 12V DC adapter (sold separately)
• Do not soak the product in water or wash with water
• The product should not be repaired. If there is any issues please consult the place of purchase
• Turn off the product before cleaning to avoid electric shocks or other issues
• Keep product away from wet or humid places

PRODUCT STRUCTURE

*Note: the ice brick can be removed by rotating the knob. Add water to the ice brick, do not exceed 400m1. The ice brick is used to improve insulation, do NOT drink the water inside the ice brick, do not let children play with it.

DIMENSIONS

OPERATION

• How to Turn on the Fridge
  1.Connect to power
  2.Press button ****
  3.The internal temperature will display and the compressor will start

• SET: Press button ****to enter different modes, ECO (Energy Saving Mode), and MAX (Fast Cooling Mode). Factory setting is MAX

• Press button + or – and set the temperature to 20°C – -20°C

Recommended temperature for common food:

POWER SUPPLY AND CHARGING

• Power Supply: The refrigerator can be powered by 12V/ 24V DC power
• Optional removable Lithium battery if there is no connection of DC/AC power. DC/ AC power will run the refrigerator, and charge the optional removable battery simultaneously.
• Battery Charging: 100-240VAC to 12VDC adapter (optional)

Optional Removable Battery Information:

Battery Model| Capacity| Rated Voltage| Charging Limited Voltage| Max Charging Current
---|---|---|---|---
GH-2050| 5.2AH| 11.1V| 12.6V| 4A
GH-2052| 7.8AH| 11.1V| 12.6V| 4A
GH-2054| 15.6AH| 11.1V| 12.6V| 4A

Warning: please do not open or disassemble the battery.

Battery Operation

1. Long press( ****) on the battery to switch ON/OFF the battery.
2. Tips to make the battery last longer:

1. Switch to ECO mode by pressing **** on the fridge panel;
2. Set the battery protection to “L” mode (very important setting to make the battery work longer time)
3. Pre-chill the fridge to your ideal temperature in advance;
4. Do not open the door frequently;
5. Do not set the temperature too low if not necessary.

• Checking Charge Status:
  When the refrigerator is powered ON and DC / AC power is connected, the battery icon on display screen will flash to show charging. To charge the fridge / freezer battery without running the compressor, simply connect the adapters without powering “ON ” the fridge. To view charging status please press and hold button ** for 3 seconds. The fridge’s battery status and voltage will be displayed. When the voltage reaches 12.6V and the battery icon stops flashing, the unit has been fully charged and wiring should be disconnected to prevent internal component from damage.
  Warning:** Do not charge fridge / freezer with DC 12V and Solar Panel at the same time! The fridge could be seriously damaged and pose a potential hazard to you.

• AC Charging Management
  If the fridge has not been used for a long time, the battery may be discharged, and the fridge will not power on. Please use the optional AC adapter to charge the fridge battery and run the fridge. After the fridge battery has charged up to 30%, you can switch to other methods for charging.

• Car Cigarette Lighter Charging Management
  The product has a three-level battery protection function, which not only guarantees the normal operation of the product, but also protect the battery of the vehicle. When in the power-on state, long press SET button for 3 seconds and the display screen flashes H, select low voltage production L(ow), M(edium), and H(igh) by clicking button Q. The factory default is set to H(igh) protection.
  Voltage Reference:

H should be set when the product is connected to car power, and M or L should be set when it is connected to a portable battery or other back-up battery. Because of the different output voltages between vehicles, the battery protection level can be set from H to M or from M to L if there is a voltage protection code Fl shown on the panel. The battery protection level should be set to H if the product will keep working after turning off the car engine, or the product may drain the battery.

BATTERY USAGE

• Optional Removable Battery: The lithium battery is back up power to keep the refrigerator working for short periods while off grid.

• Notice: When not using the battery power or fridge for a long time, please turn off the battery output. (Hold setting button for 3 Sec).

• Maintain Battery Charge:
  1. Home / Hotel: Use AC adapter to charge unit from AC outlet.
  2. Car / Boat: Use DC port to power the fridge and charge the battery.
  3. Outdoor: Charge the battery with a solar panel (optional). Portable 12V power system / solar with / or petrol generator would be good companion.

• Extended battery usage:
  1. Cool down the fridge before your journey: It is always suggested to charge fridge battery and cool the fridge down in advance with the mains to DC adapter from the wall outlet the day before the trip. To prepare for off-grid fridge usage, place food and beverages inside fridge for cooling the day before. This will not only keep the optional battery more durable, but also save energy for outdoor activities once on battery mode.
  2. Disconnecting the Battery: The battery can be removed or disconnected with the side button. This prevents the battery from discharging. The product will work from the AC adapter or car outlet without the optional battery installed.
  Note: Please charge fully the optional battery before it is put into storage 1 month or more.

SMART CONTROL FRIDGE APP APPLICATION INSTRUCTION

Downloading the “BRASS MONKEY FRIDGE” Application

• Using a pre-installed QR reader on your handheld smart device scan the QR code in the manual or on the carton, or search for the “BRASS MONKEY FRIDGE” APP in the iTunes App Store (for Apple devices) or Google store (Android Devices).
• Start the application and select the “Search” function.
• The application will prompt you to pair the fridge by pressing the set button on the fridge’s control panel. Once set button has been activated, the fridge will be paired with your smart device and the application will switch to a control panel allowing you to control the fridge’s functions.

Please scan the QR code to download APP

content/uploads/2023/03/BRASS-MONKEY-GH-2046-Fridge-Freezer-qr1.png)
https://itunes.apple.com/us/app/brass- monkey/id1463911496?l=zh&ls=1&mt=8| https://play.google.com/store/apps/details?id=com.techbrands.fridge.controller

CLEANING & MAINTENANCE

Cleaning:

• Unplug the device first to avoid electric shock.

• Use wet cloth to clean the device and dry it.

• Do not soak the device in water and do not wash it directly.

• Do not use abrasive cleaning agents as these can damage the device.
  Storage: If the device will not be in use for a long time, please follow the steps:

• Turn off the power and remove the plug.

• Remove all the items stored in the device.

• Wipe off excess water from the fridge with a soft rag.

• Put the device in a cool and dry place.

• Leave the door slightly open to prevent odors from forming. Defrosting: Humidity can form frost in the interior of the cooling device or on the evaporator. This reduces the cooling capacity. Defrost the device in good time to avoid this.

• Switch off the device.

• Take out the contents of the device.

• Keep the door open.

• Wipe off the defrosted water.
  Never use hard or sharp tools to remove ice or to loosen objects which have frozen in place.

TROUBLESHOOTING

• The product is not working:
  – If using the 240VAC to 12VDC adapter (sold separately) check the power supply is working
  – If using the DC cable please ensure the cable still works.
  – Check the power supply is working
  – Check if the plug and socket are connected
  – Check the fuse
  – Check power switch on control panel is on
  – Compressor starts delay protection for 3 minutes after turning on

• Food inside the product is frozen:
  – Temperature is set too low

• Water flowing sound inside the tank:
  – Refrigerant is flowing, this is normal

• Water drops around the case or door gap:
  – When moisture in the air meets the lower temperature case, it will naturally become liquefied and condensed.
  Wipe away with a towel or soft cloth

• Code Fl displayed:
  – Low voltage protection, which can be solved by setting the battery protection button from H to M or from M to L

• Code F2 displayed:
  – Fan overload protection. Please turn off the product and restart it after 30 minutes.
  If the code displays again, please contact the place of purchase

• Code F3 displayed:
  – Compressor frequent start protection. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase

• Code F4 displayed:
  – Compressor is overloaded or working at a low speed. Please turn off the product and restart it after 30 minutes. If the code displays again, please contact the place of purchase

• Code F5 displayed:
  – High temperature compressor module protection. Please move the product to a ventilated area and turn it off for 30 minutes then restart it. If the code displays again, please contact the place of purchase

• Code F6 displayed:
  – No parameter can be detected by the controller. Please restart the product. If the code displays again, please contact the place of purchase

• Code F7 / F8 displayed: – Temperature sensor error protection. Please check the sensor terminal
  The warranty for this product is 3 years from date of purchase. During the warranty period the following are excluded from coverage:

• Intentional damage

• Damage by fire, flood, etc

• Damage or malfunction caused by incorrect usage and not following this user manual

• Damage or malfunction caused by disassembling

Distributed by:
Electus Distribution Pty. Ltd.
320 Victoria Rd, Rydalmere NSW 2116 Australia
www.electusdistribution.com.au
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>