Losfom WD1 Body Camera with Audio User Manual

Losfom WD1 Body Camera with Audio

PREFACE
We sincerely thank you for using our company’s product. This manual is the introduction of the WD1 body police camera which includes its functions, features, external structure, operation, and caution items. Before using the product, please read the user manual carefully and keep it properly.

STRUCTURE DIAGRAM

1. Red Flashing Light
2. Infrared Lights
3. Video/Night Vision Button
4. White Light
5. Photo Button
6. Working Indicator
7. White Light Button/Alarm Button
8. Lens
9. Blue Flashing Light
10. Infrared Lights
11. Microphone
12. Image Sensor
13. Power Indicator
14. Speaker Hole
15. Reset Hole
16. USB/Charging Interface
17. LCD Display
18. Audio Button
19. Power On/Off Button
20. Menu/OK Button
21. Up/Mark Key
22. Down/Playback Button
23. Return Button

LCD INDICATION

1. Video Icon
2. Resolution
3. Device ID & Police ID
4. System Date
5. System Time
6. Battery Icon
7. Audio Icon
8. TF Card
9. Current Video Recording Length

BASIC OPERATION

How to charge the device

• Low battery prompt:
  When the battery voltage is too low, the screen will intermittently display the words “Battery Low” with a prompt sound, and it will automatically shut down after 5 minutes.

• Please charge it in time if the battery is low, so as not to affect your use.

• If idle the camera for a long time, please charge it every two months.

When need to use it, please charge it fully first.

There are two ways to charge this product:

• Method 1： Using the USB cable and charger to charge.
• Method 2： Connect to the computer to charge. As shown in the below position, use the USB cable to connect to the computer.

When charging, the working indicator light shows green, the power indicator light shows blue, and the blue indicator goes out after fully charging .

Power On/Off/Standby Mode

Power On:
In the shutdown state, press and hold the button to power on, and enter the preview screen, the working indicator shows green.

Turn on the LCD Display function in the menu, if without any operation after 5 minutes after powering on, the default is to automatically enter the LCD Auto Off mode. Start video recording for 5 minutes, without any other operations, then it automatically enters the LCD Auto Off mode and the red indicator keep flashing. (LCD Display option can be set to off/30 seconds/1min /2min/5min).

Power Off:
In the power-on state, press and hold the button for 3 seconds to power off, and all the indicator lights go out.

Standby Mode:
In the power-on state, the power indicator stays green. Turn on the LCD Display option in the menu, if without any operation after 30 seconds/1min/2min/5min after powering on, the screen will turn off. Tap any button to light up the display screen.

Take Photo
In the power-on state, short press the button to take a picture and automatically save it. There will be a “click” sound during the picture. The picture is named after the date and time, and the suffix is JPG. Short press the button to enter the playback mode. (When the icon turns from to , the photo is taken successfully.)

Video Recording

Normal Video
In the standby mode with the preview screen, tap the button to start the video recording; OR in the power off state, long press the button for 3 seconds to start the video recording. When recording, there is a red dot flashing slowly in the screen’s upper left corner, and the work indicator shows red flashing.

Press the button again to stop recording, the indicator turns back to steady green, the video file is automatically saved and the camera automatically returns to the preview screen. The video is named after the date and time, with AVI as the suffix. Short press the button to enter the playback mode.

Snapshot
During the recording process, short press the button to take a picture and save it automatically. The video recording will not be interrupted during this process.

Video Lock/Mark
Press the button to start the video recording, click the button to lock the current video and mark it as a key video, then need to click the video button again to save this key video. This function will not interrupt the video process.

• The marked videos will be saved and the video file name starts with“ SOS_”.
• During the video recording, click the button to lock the current video and click the button again to release the lock. Then press the button to save the file.
• This video will save as a normal video, named beginning as“ NOR_”.

Please check the below picture:

If marked the video as a locked video, this file will not be covered after the memory is full during the Loop Recording/Cyclic Record mode. And the locked videos can’t be deleted from the camera.

Audio Recording
In the power-on state, tap the button; OR long press and hold the button for 3 seconds in the power-off state, to start an audio recording. When recording, the screen displays a logo and the work indicator flashes red and green. Press the button again to stop the audio recording. The work indicator goes off and the audio file is automatically saved. The camera automatically returns to the preview screen. The indicator turns to steady green light. The audio is named after the date and time, with .WAV as the suffix. Short press the button to enter the playback mode.

Night Vision
The infrared night vision function defaults to “Manual”, and the infrared night vision light is off, which is suitable for daytime use.

For night use, need to manually switch to infrared night vision mode. In the power-on state, long press the button to turn on the IR mode. At this time, the six infrared lights are turned on and appear red. The preview screen or the image changes to black and white. Long press the button again to turn off the IR mode. IR lights turn off, and the preview screen or the image will be restored to its color.

If need the camera to switch automatically, enter the menu to set IR Filter to “Auto”. Then the camera can automatically switch the infrared night vision mode according to the brightness of the environment.

Files View /Playback

• In the standby mode, short press the button to enter the playback menu, and use the button or button to select the desired option, as shown in the figure below:
• Press the button to enter the playback list, and use the button or the button to select the file to be played;
• Press the button to view and press the button to return to the previous menu.

File Deletion

Note:
If you need to protect the recorded files, turn on the “Password” option in the menu setting. Otherwise, all the files can be deleted without password verification.

After turning on the “Password ” option in the menu setting, need to enter the default password: 000000 first before deleting files. The locked/marked video can’t be deleted on the camera’s side, other files can be deleted normally.

Step as:

• In standby, short press the button to enter the playback mode.
• Use the button or button to choose the Video/ Photo/ Audio file need to delete, and click  the button to the playback file list.
• Long press the button to the password verification page, and insert the default password(000000) if first use (otherwise, enter the password you have modified).
• After that get the option of“ cancel” or“ ok” interface, use the button or button to choose“ cancel” or“ ok”, then click the button to confirm. After deleting the file, the camera goes back to the previous playback file list.

File Transfer/Connecting Computer
Connect to the computer with the USB cable attached. Then enter USB disk mode. If turn on the “Password” option in the menu, need to input the password you set first, (the default password is 000000) and then could review or delete the files in the computer.

Camera Password

Default Camera Password: 000000

There is a “Password” option in the menu setting, click the OK button in the standby mode to get into the menu, then turn to the “Password” function. If want to turn it on, you need to insert the default password: 000000 first. Click the button again, then use the button or button to choose the “On” option and click the button again to save the change.

After turning on the “Password ” option, the below circumstance needs to verify the password, including but not limited to:

1. When connecting the camera to the PC side;
2. Try to delete the files on the camera;
3. Choose to change the camera password, need to verify the old password(If the new camera is, need to enter the default password.)

How to change the password?
Short press the button in the standby mode, then turn to the “Change Password” section in the menu. Before changing, you need to insert the default password: 000000 first. Then use and button to choose the 6-character password you desired, then need to click the button to save the change.

Reset
When the device crashes or stops working due to improper operation or other special reasons, please press the button to reset the device. Then re-power the camera to check.

SYSTEM SETTING/ MENU LIST

In standby mode, press the button to enter the setting menu. After entering the menu interface, use the button and button to select the list to be set, press the button to confirm. Use the button or button to change the options, then press the button again to confirm and save the setting changes.

WORKING INDICATOR LIGHT

1. In the power-on state, camera standby, the power indicator shows steady green;
2. In the video mode, the working indicator light is red and flashes slowly;
3. In the audio mode, the working indicator is red and green and flashes slowly;
4. Connecting a camera to the computer, the work indicator is green, the power indicator is blue;
5. When charging, the power indicator is blue, and the light will be off when fully charged. If charging when powering on, the power indicator shows blue and the working indicator shows green;
6. After powering on, every time a photo is taken, the work indicator flashes red once;

WHITE LIGHT & ALARM FUNCTION

White Light
After powering on, long press the button to turn on/off the white light, the camera emits white light, which acts as an illuminating light.

Red & Blue Flashing and Alarm
After powering on, tap the button to turn on the alarm function. The camera will sound an alarm and flash red and blue warning lights. Press the button again to turn off the alarm sound, and tap it again to turn off the flashing lights.

DASH CAMERA MODE

In standby mode, press the button to enter the setting menu. Use the button and button to get the Car Dash Cam Mode option, and press the button to get the two options of“ Off” and“ On”. Press the button or button to change the option to“ On”, then press the button again to confirm and save the change.

The package includes a Car Suction Cup Bracket to install the body camera on the car windshield.

This suction cup only supports clean and smooth glass material. If the surface is not smooth enough or frosted glass can not suck firmly.

Instructions to install:

Lose the snap and install the screw

Install the suction bracket to the WD1 body camera

SPECIFICATIONS

24H Standby Time

Drop Resistance Level| 2M Anti-fall
Storage Temperature| -40~+60℃
Working Temperature| -10~+45℃
Compatible System| Windows XP/7/8 SP3/Vista and Mac 10.5 or above

TROUBLESHOOTING

Q: The camera couldn’t power on, does it stop working?

A:

1. Connect the charger and cable to charge the device, and check whether the problem is solved after 4 hours of charging;
2. Please check whether the charging interface and the USB cable are normal;
3. Use a pin to reset of the camera and re-power on to check again;
4. If the problem cannot be solved, please contact customer service for further help.

Q: The image shot by the device is red/ green. Or the screen has a color difference.
A: Please shut down the camera and restart it to check.

Q: Why the screen turns off automatically?
A: The camera enters the LCD Auto Off mode by default without 5 minutes of operation. If you want the display is always on, please enter the menu to set the LCD Display option to Off. LCD Display option can be set to off/30 sec/1 min/2 min/5 min.

Q: Why does the camera shut off auto?

• A: Please check whether the Auto Power Off option in the menu is on. If you want the camera to stay power-on state, please enter the menu to set Auto Power Off to Off. Auto Power Off mode can be set to off/3 min/5 min/10 min.
• A: What does the Stealth Mode/Secret Mode in the menu mean?
• A: The Stealth Mode/Secret Mode is default Off in the menu. If turn it on, when recording video/audio/ taking photos, the indicator light and sound won’t appear, realize the hidden recording.

Q: A video or audio cannot be played? Or no sound for videos?
A: Please check the menu and turn on the“ Video sound” option. Turn to the loudest volume of the camera to check whether the sound could playback normally with the camera itself. It is recommended to playback videos/ audio on the VCL media player on your computer.

PACKAGE LIST

CUSTOMER SERVICE

Losfom is always dedicated to offering the best service to our valuable customers. To reach customer service, please e-mail us: Official Email address: support01@losfom.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>